Partial Eaton Swap

[Trip]

SOLD!!!!!!

[Spraying46]

What's left to get after what u have

[Trip]

What's left to get after what u have

There's some threads that give complete lists of parts needed. But off the top of my head you'll still need:
Cobra oil cooler
Cobra power steering pump
Air intake of your choice with MAF
Throttle and cruise cable
Intercooler reservoir
Upgraded fuel system
Various sensors and hardware

[martyo]

What's left to get after what u have

Are you planning on using this in a Marauder?

If so, a number of the parts are NOT what you need.

[chief455]

Are you planning on using this in a Marauder?

If so, a number of the parts are NOT what you need.

was thinking the same:
NOT for Marauder swap:
Cobra front cover with pulley bridge
Cobra Balancer with lower caged pulley
Cobra coolant crossover tube
Alternator with brackets
Upper idler bracket

the list is for a Cobra swap as the ad was written, yes:)

[martyo]

the list is for a Cobra swap as the ad was written, yes:)

Since it is posted here on a Marauder site and the ad was titled "Eaton Swap" I was concerned that someone with less experience might think they were getting what they need for a Marauder oriented swap especially based on the post and reply to the "what else will I need?" question.

Oh, and the OP has a Mach1 so the swap set up would be different than a Marauder....

[Trip]

Thanks you guys for some clarification. I wasn't trying to confuse anybody, I didn't know that the swaps were that much different. I will adjust accordingly.

[Zack]

Where in Indiana are you?

[Trip]

Wheatfield, 45 minutes from St. John.

[Trip]

Sold!!!!!!

[chief455]

Zack, you didn't, or did you? :shake: