PDA

View Full Version : Fuse Box Diagram?


Taemian
06-23-2015, 12:10 PM
The fan motor for the heat & a/c stopped working, but I don't have an owner's manual to see the fuse listing locations. Anyone got a jpeg they can post?

Thanks!
Taemian
06-23-2015, 12:11 PM
Never mind, Google to the rescue!
fastblackmerc
06-23-2015, 12:18 PM
If the fuse isn't blown, try tapping the BCM. If the fan works the BCM needs to be replaced or fixed. I offer repaired ones for $25.00. I just need your old one back.
Taemian
06-23-2015, 02:06 PM
Well, I checked the fuses in the car (103 and 301) then checked the underhood relay (swapped with another) then checked the blower motor itself (hooked to 12v battery). Everything is ok. Then did an EATC self test, all fine. Must be BCM?

When I tried manually turning fan wheel control up, I hear a clicking from the middle of the dash, then another click about 5 secs later. (But still get no fan)
fastblackmerc
06-23-2015, 02:36 PM
Well, I checked the fuses in the car (103 and 301) then checked the underhood relay (swapped with another) then checked the blower motor itself (hooked to 12v battery). Everything is ok. Then did an EATC self test, all fine. Must be BCM?

When I tried manually turning fan wheel control up, I hear a clicking from the middle of the dash, then another click about 5 secs later. (But still get no fan)

Did you tap the BCM?
Taemian
06-23-2015, 02:42 PM
Yup, got nothing. But I am unable to get to much of it. Your cooling mod "T" and hoses are right in the way :-)

But like I said, the motor goes to full when I jump it directly on the terminals with a 12v source. I just double checked it again.

Do you have any of the modded BCMs handy? I'm bringing my car along for a family photoshoot this weekend. Would be a shame to have to take two cars...one for the a/c ride over there, and one for the photo shoot LoL.
Taemian
06-23-2015, 02:44 PM
Oops, got you mixed up with MuscleMerc...been gone awhile with the brain tumor and all.
fastblackmerc
06-23-2015, 04:22 PM
Yup, got nothing. But I am unable to get to much of it. Your cooling mod "T" and hoses are right in the way :-)

But like I said, the motor goes to full when I jump it directly on the terminals with a 12v source. I just double checked it again.

Do you have any of the modded BCMs handy? I'm bringing my car along for a family photoshoot this weekend. Would be a shame to have to take two cars...one for the a/c ride over there, and one for the photo shoot LoL.

Yes I do. PM me.