Rear End/Carrier.

[Tevon]

Hey guys! Im curious, but for http://www.americanmuscle.com/ford-31spline-88-carbondisc.html

To correctly work i should ONLY need to change the axles to 31 spline, correct? Pinion and other parts should work just fine?

And for something like this, how long should it take to put in Seals, Bearings, Carrier, and Axles?

[fastblackmerc]

Yes you would ONLY need 31 spline axles, bearings, seals, gears & fluid.

The swap should be less than 4 hours at a reputable shop.

[fastblackmerc]

BTW.... any 8.8 Ford parts will work.

[Tevon]

Yes you would ONLY need 31 spline axles, bearings, seals, gears & fluid.

The swap should be less than 4 hours at a reputable shop.

Thank ya, :D

[GoldPanther]

Buy the axle shafts as if they were for a 2006 and up crown vic. They are 31 splines and will work perfectly