TCE SS HOSE FIT CHECK- Please Read and pass on

[Todd TCE]

It has come to my attention that a customer has received an incorrect hose end on a four line kit.

If you have purchased a kit (standard or Zach) in the past few weeks or month please check the fittings before installing them. If you have installed them and it's all good by all means don't take them off.

The fittings on all four ends for the hardline should be M10 BUBBLE flare.

The following image will show you Bubble (left and correct) VS Inverted Flare (right and incorrect)

If you have a wrong part (or two..) please email me so we can right the ship. Seems we went through this four years ago with my hose supplier....I know.

[martyo]

Those fingers look familiar!

:D

[1Marauder]

Those fingers look familiar!

:D
yikes YIKES yikes

[martyo]

yikes YIKES yikes

I didn't say they were mine!!! :D

LOL!!!

[chief455]

Crap! Order them Sunday, 2 are wrong.
Thanks for the heads up, or my mechanic would be stuck on the lift swearing at you ;)
email sent.

[Todd TCE]

This appears to be (i hope) limited to the front lines it appears.

I will have more here on Monday for a couple of you.

[justbob]

I was one of the first to order a Zack set of four. I opened it up and all are good if that helps narrow it down.


Builder Of Badassery

[Todd TCE]

Looks to be limited to a few of the OE front line sets. Hopefully!

Believe it or not..I really do look at things when they come in. But sometimes quickly and not all one by one by one etc. Place my faith in suppliers. Sometimes that goes bad. Like when you ship a red and black caliper- because the boxes both say red...sheese.

[SAAAAAC]

Ordered my set a couple of months ago. All good here.

Sent from my 2003 Mercury Marauder

[martyo]

Got my replacement today and it's on the car already.

Thanks for the service Todd.

Remember, stuff happens!

[Kramer1]

Ordered mine last week. Just got them in yesterday. Zack front pair, all good here....wait....is it your left or my left looking at the picture :)