Hose Clamps

[Bob Mathis]

Will I am starting a new thread on hose clamps. I did not see any posting.
I have done some looking and see the new Gates Power Grip. I have watched how to install them on you tube. I am thinking about doing them on some of my hoses. I am all so looking to put the factor ones on in places that I may not be able to install the Power Grip. I really do not like the looks of the screw type. I will be replacing all the hoses. I have the 5/8 Power grips all ready. I know it will take some time. Yes, I all so know that if something goes wrong you have to cut them off.

If any one has some stock large clamps I would like to get them. I will pay for them.

[Zack]

The lack of specifity award goes to.....

[martyo]

I have tried to convince my wife 4 inches is large for years.

[Mike M]

That's some funny S***!

[Bob Mathis]

Here is a more specification of what I am wanting and doing. For those that did not know what I was saying. The upper Rad. hose clamps. It is called Constant Tension Bland. I thought some would know what clamps I was looking for.

All so here is a picture of both type of clamps. I could not down load the picture of the large because I put it in the wanted Thread. Not sure when I down load a picture in one thread why it will not let me do it in another one. so if you not sure what it looks like just go there.

[Bob Mathis]

Marty Jean say five is all she needs.

[Bob Mathis]

Here is where I installed my first Power Grips on my PCV lines.