ScanGauge or Aeroforce Gauge?

[BeeDamn]

Hello Everyone.

I'm confused between a ScanGauge or Aeroforce Gauge? I read here about both and I got confused, It seems the Aeroforce can read more data than the ScanGauge but required tow Gauges right?

If it's Aeroforce better which one? the Interceptor one? But if it's ScanGauge the one with the red screen mabye?

Please help me decide which one is best for our Marauder.

Thanks

[sailsmen]

I have 2 AeroForce Interceptors on the driver's A pillar in a pod.

Very happy with them

[1stMerc]

I have a ScanGauge ll (mounted on steering column) and a DashDaq XL (mounted where clock would be on a 03). Love um. DashDaq does a multitude of things. Ford screens look different than ones in video.

https://www.youtube.com/watch?v=1jIo4OE2Yww

More like this

https://www.youtube.com/watch?v=OGoOANURIDA

[MOTOWN]

Hands down its Aeroforce gauges! They monitor everything you can think of plus a whole lot more.

[Bad_S55]

I've got an Ultragauge EM Plus. That sucker moniters EVERYTHING. Basically if the computer is being fed it, the Ultragauge can display it.

[chief455]

Hello Everyone.

I'm confused between a ScanGauge or Aeroforce Gauge? I read here about both and I got confused, It seems the Aeroforce can read more data than the ScanGauge but required tow Gauges right?

If it's Aeroforce better which one? the Interceptor one? But if it's ScanGauge the one with the red screen mabye?

Please help me decide which one is best for our Marauder.

Thanks

I just mounted my new Scangauge II

I think it has a way to dig into more PID's to display, but it's confusing. It's on my stock n/a Crown Vic, so I display: intake air temp, volts, rpm, timing degrees. It has lagged reaction to changes, not that fast on the display rate.

benefit is it easily reads and clears any check engine codes, and it checks emissions monitor readiness. I won't need to use my full scan tool if I get a CEL while driving,
has med green backlight that matches dash perfectly.
$125 and 10 minutes. Velcro strip is all. And, you can take it to another car pretty fast and plug in, like a scan tool.

I have 2 Aeroforce Interceptor gauges in the boosted car. can read 8 things at once! They read everything in your PCM. It can read and clear CEL also, but not sure how easily.
If you buy it new, can get green backlighting, and they still come with a Marauder logo start up screen.
One gauge is probably enough for most guys. Fast display change rate, it reads pretty quickly.
Cost more, need something to mount it with - cup or pod.

If I could have only one, I'd have the Aeroforce Interceptor.

[BeeDamn]

Thanks guys for the big help and feedback.
Wow I didn't know that there's such a good product like DashDaq or Ultragauge with decent price maybe I should dig more before I decide which one to go.
anymore experience or another product is welcomed

[Lowndex]

Pictures, pretty please. I would like to locate my gauges as replacements for the stock ones. I dislike the tree version.

[Merky_Marquis]

I have the Ultragauge MX 1.3 (the top of the line model they make)
There are multiple gauges and pages to put them on, I use 3 out of the 7 available pages with 6 gauges on each page.
I've had the Scangauge2 and the Ultragauge is better in my opinion.

http://www.supermotors.net/getfile/1065912/fullsize/20150822_231927.jpg

[BeeDamn]

Nice sir is that the Tranny Temp? I didn't understand it from their website about how to show it! is difficult to show because they say it's for advance users only!

[Lowndex]

Has anyone replaced the two stock gauges above the shifter with two Aeroforce Interceptor gauges (http://www.aeroforcetech.com/products_order_ford.html)?


Pictures, please

[Marauderjack]

Don't forget this little jewel!!:bows: :beer:

http://www.amazon.com/gp/product/B005NLQAHS?keywords=bafx%20blu etooth%20obd2&qid=1444729094&ref_=sr_1_1&sr=8-1

[Bad_S55]

Has anyone replaced the two stock gauges above the shifter with two Aeroforce Interceptor gauges (http://www.aeroforcetech.com/products_order_ford.html)?


Pictures, please

I know someone who has. I don't have pictures though.

[Blackmobile]

Has anyone replaced the two stock gauges above the shifter with two Aeroforce Interceptor gauges (http://www.aeroforcetech.com/products_order_ford.html)?


Pictures, please

http://www.mercurymarauder.net/gallery/data/670/medium/Aeroforce_dual_gauge_setup711. JPGhttp://www.mercurymarauder.net/gallery/data/670/medium/DSCN0177.JPG