PDA

View Full Version : +2 lb Boost pulley


mm svt
09-06-2015, 05:46 AM
[ATTACH]42220[/ATTACH

]Hi All,
I currently have a stock pulley on the MM and would like to add
a couple extra LBs of boost. What is the proper upper pulley for this added
power?

Does anyone have one they don't need and would like to sell?
8UWITH6
09-06-2015, 12:56 PM
I have a Metco 2lb lower pulley and hub kit. Will not separate. Lmk
Spectragod
09-06-2015, 01:37 PM
I have a Metco 2lb lower pulley and hub kit. Will not separate. Lmk

I could use that......hmmmmm
Logizyme
09-06-2015, 03:17 PM
A 3.4" upper would be a good place to start
Spectragod
09-06-2015, 04:16 PM
A 3.4" upper would be a good place to start

That would be going backwards, I already have a 3.0" upper....
Logizyme
09-06-2015, 05:53 PM
I was talking about the OP, he wanted an upper pulley not a lower, a 3.4 should be a perfect upgrade to add 1-2psi (since he has a stock upper)

Also the Metco Eaton hub is the wrong offset for a trilogy.
Spectragod
09-06-2015, 06:42 PM
I was talking about the OP, he wanted an upper pulley not a lower, a 3.4 should be a perfect upgrade to add 1-2psi (since he has a stock upper)

Also the Metco Eaton hub is the wrong offset for a trilogy.

Wrong offset, but got me thinking about my next mod
mm svt
09-06-2015, 08:11 PM
"A 3.4" upper would be a good place to start"

Who is the best vender for the 3.4 and puller?
Do you know if Mo's carry them?
Logizyme
09-06-2015, 08:34 PM
Billetflow is prob your best bet.

http://www.lethalperformance.com/shop-now/vehicle-selector/ford-svt-cobra-terminator/03-04-svt-cobra/pulleys-idlers/supercharger-pulleys/upper-pulleys
RubberCtyRauder
09-06-2015, 08:51 PM
"A 3.4" upper would be a good place to start"

Who is the best vender for the 3.4 and puller?
Do you know if Mo's carry them?

Mo's is not really a reseller of stuff except for stuff they are dealer for like Stainless Works headers and exhaust for example . You will need a updated tune when changing pulleys
mm svt
09-07-2015, 06:02 AM
Billetflow is prob your best bet.

http://www.lethalperformance.com/shop-now/vehicle-selector/ford-svt-cobra-terminator/03-04-svt-cobra/pulleys-idlers/supercharger-pulleys/upper-pulleys

thank you, I ordered the 3.4 pulley and the billet flow puller. This will max out the stock bottom end for sure

http://ink361.com/app/users/ig-357454110/rileysaurousrex/photos/ig-985620854391979168_357454110 :o

Also talked with Jeff @ MO's (cant speak any higher of him) he will send a new tune
justbob
09-07-2015, 07:40 AM
I ran a 3.2 and only came in at 445 RWHP. Far from maxing out the bottom end at only 11.7#s. I ran that safely for three years.


Builder Of Badassery
mm svt
09-07-2015, 08:11 AM
[QUOTE=justbob;1463951]I ran a 3.2 and only came in at 445 RWHP. Far from maxing out the bottom end at only 11.7#s. I ran that safely for three years./QUOTE]

Billet flow did not offer the 3.2 they go from 3.4 to 3.1, I would do the 3.1 only if I were at MO's on the dyno.

I would like to get a Cobra short block on my terms and not the engines :)