Muffler replacement

[redmercy04]

I have noticed for the last few month of an exhaust vibration from rear passager side. So I thought maybe a hanger was loose. While changing oil I checked it out and found when I knock on the passager side muffle that something vibrating. So it about time for replacement. So of course both will be replaced. I brought the MM with flomasters 40s & I love the tone and sound, but since the MM became my daily driver. Gave moms the GM til I get her car back up. It can be a bit loud at times. I was just fine when I had my GM as the dd & the MM for playtime. Here my question should I replace with same flomasters 40s & wait til I get the GM back or go with a less aggressive flomasters. Oh yea will brand new muffler sound much different from old one

[Marauderjack]

Magnaflow 18's.......no drone and quiet cruising....LOUD when ya hit it!!:beer: :burnout: :D

Oh.....and......LIFETIME WARRANTY!!:bows:

[redmercy04]

Have anyone hear a MM with flomasters super 40s deltas

Sent from my LG-H810 using Tapatalk

[crownvic05]

if your ears are used to flowmaster 40 and you like how they sound then stick with the same or go with the super 40's or super 44. Going to magnaflows is something esle and you will notice a big difference in sound. Magnaflows sound less then flowmasters for sure.

[tylerdurden2816]

Folllowing

[redmercy04]

Thinking bout going with the Delta 40's black, but weird thing happen I when WOT recently & haven't heard sound since

Sent from my LG-H810 using Tapatalk

[redmercy04]

Went* WOT

Sent from my LG-H810 using Tapatalk

[NavySeabee]

if your ears are used to flowmaster 40 and you like how they sound then stick with the same or go with the super 40's or super 44. Going to magnaflows is something esle and you will notice a big difference in sound. Magnaflows sound less then flowmasters for sure.

Planning to replace my Flowmaster 40s soon also. Been researching different mufflers. I like the current sound also. What I could not find is how does the sound differ between flowmaster40, Flowmaster Super 44, Super 40, and Delta? I've seen a few videos but can't really tell since alot of the videos had other mods to the exhaust. Mine is all stock except the current Flowmaster 40's. Thanks.

[Davco]

Planning to replace my Flowmaster 40s soon also. Been researching different mufflers. I like the current sound also. What I could not find is how does the sound differ between flowmaster40, Flowmaster Super 44, Super 40, and Delta? I've seen a few videos but can't really tell since alot of the videos had other mods to the exhaust. Mine is all stock except the current Flowmaster 40's. Thanks.

I can't answer about any of them except the deltas. I thought these were the quieter option of the group. I put deltas on my old Silverado to keep from dealing with drone. They were definitely quieter compared to some friends that had 40s on the same type Silverado.

[akr619]

Aero Turbine Exhaust 2525 xD

https://www.youtube.com/watch?v=QQBYVUQY1ww

[NavySeabee]

Aero Turbine Exhaust 2525 xD

https://www.youtube.com/watch?v=QQBYVUQY1ww

Just a tad bit aggressive for my neighborhood. Great video though! Sounds good on the highway.

[Bad_S55]

I need to throw my vote down just because I'm the only Panther on the planet that has them. Black Widow Venom 250s. 'Nuff said.

aPN9Ef63Ods

[camelgrundle]

I have the super 44's with headers and exhaust and it is loud but I love it. Just put earmuffs on my 5month old lol jk.

[redmercy04]

Should the inlet & outlet be 2.5 or 3

Sent from my LG-H810 using Tapatalk

[Lowndex]

Magnaflow 18's.......no drone and quiet cruising....LOUD when ya hit it!!:beer: :burnout: :D

Oh.....and......LIFETIME WARRANTY!!:bows:


https://www.magnaflow.com/automotive-performance/mufflers/

Don't see any 18's. Please advise.

[RubberCtyRauder]

Part number 11256. You have to click on a muffler type to see all the possibilities. The 4 x 9 for instance is the height and width of case the 18 in reference is the length of the case

[redmercy04]

Thinking bout going 4" too also should I try these

http://m.ebay.com/itm/Stainless-Steel-Tail-Pipe-Rolled-Exhaust-Tip-2-5-Inlet-4-Outlet-18-Long-/121537056752?_trkparms=aid%253 D222007%2526algo%253DSIC.MBE%2 526ao%253D1%2526asc%253D201505 19202348%2526meid%253D00e3a711 b52c458da928db997aa6d66d%2526p id%253D100408%2526rk%253D1%252 6rkt%253D2%2526sd%253D39052527 1254&_trksid=p2056116.c100408.m2460

Sent from my LG-H810 using Tapatalk

[redmercy04]

Price seems to cheap to be good

Sent from my LG-H810 using Tapatalk

[Mr. Man]

Part number 11256. You have to click on a muffler type to see all the possibilities. The 4 x 9 for instance is the height and width of case the 18 in reference is the length of the case
With this part # do you need to reducers if you stick with the stock system or can the weld make up the diff?

[RubberCtyRauder]

I'm not sure. The part number I chose was for a 2.5 system . That's only .125 per side so weld should easily fill the difference . My systems isn't stock so I didn't look to see other sizes available

[redmercy04]

Any opinions on the ebay exhaust tips

Sent from my LG-H810 using Tapatalk

[RubberCtyRauder]

They are 8" shorter than stock tips so will have to extend tailpipes and add hangars .

[redmercy04]

Oh they're 26" damn smh

Sent from my LG-H810 using Tapatalk