PDA

View Full Version : Camber Bolt Install Instructions Power Point Slide.


Fly007
09-26-2015, 10:13 PM
Well I did the Camber bolt install and took some photos, I used those to make a power point slide of the process. But didnt do much good tried to upload it and the sight wont take power point. Any suggestions on how to upload it?
fastblackmerc
09-27-2015, 07:01 AM
Well I did the Camber bolt install and took some photos, I used those to make a power point slide of the process. But didnt do much good tried to upload it and the sight wont take power point. Any suggestions on how to upload it?

No, but there are a million videos on YouTube and a very good one the SPC website.
chief455
09-27-2015, 08:47 AM
maybe a photobucket or imageshack type hosting website will display Powerpoint, and you can than put the URL here?
MOTOWN
09-27-2015, 12:41 PM
The SPC video is more than sufficient.
Fly007
09-27-2015, 01:30 PM
I apologize, was not aware SPC had a video, and the ones I saw on YouTube were pretty vague and generic. Thought maybe a PowerPoint slide with close ups would be helpful.


Sent from my iPhone using Tapatalk
burt ragio
09-27-2015, 05:03 PM
Where is this video ?
fastblackmerc
09-27-2015, 05:14 PM
Where is this video ?

Just a WAG.. But I'd try the SPC website.
justbob
09-27-2015, 07:32 PM
Pretty easy directions included.


Builder Of Badassery
fastblackmerc
09-28-2015, 04:38 AM
Where is this video ?

video link:

http://www.spcalignment.com/component/spc/?task=part_description&pid=87365&region=USA&make=Mercury&model=Marauder&year=2003%20-%202004&from=USAFrom&to=USATo
Fly007
09-28-2015, 11:24 AM
Man try to help out and all you get is a bunch of smart comments. But then again it's a lot easier to be a rude know it all on the internet than it is face to face huh?


Sent from my iPhone using Tapatalk
fastblackmerc
09-28-2015, 12:12 PM
Man try to help out and all you get is a bunch of smart comments. But then again it's a lot easier to be a rude know it all on the internet than it is face to face huh?


Sent from my iPhone using Tapatalk

No, just letting you know there are alot of them out there and to not waste your time. Why reinvent the wheel?
justbob
09-28-2015, 04:45 PM
Man try to help out and all you get is a bunch of smart comments. But then again it's a lot easier to be a rude know it all on the internet than it is face to face huh?


Sent from my iPhone using Tapatalk


Just trying to save you the time is all. If you felt you were in over your head doing this and the information that's out there wasn't adequate, just remember that in the end you accomplished it just fine. Most of the people here have owned these cars for a decade + and know the car like the back of their hand is all.


Builder Of Badassery