Which belt to use with procharger

[JimP]

I took the blower off for some maintenance, anyone know which belt is required. I see no markings left on this one.

Thank you!

[hotford]

I took the blower off for some maintenance, anyone know which belt is required. I see no markings left on this one.

Thank you!

No markings.....easy way is to measure the belt is with a tape measure that will get ya close....unless someone else here has the same set up with pulleys you could get lucky.....

[MOTOWN]

Just measure the belt , and then get a Gates fleetrunner (Green back) belt they are the best you can buy.

[JimP]

Looks like I'm measuring. Off to the parts place.

[martyo]

Looks like I'm measuring. Off to the parts place.

Bring the belt. They will measure for you.

[justbob]

I'll buy you three of your belts if you buy me just one for my ProCharger! [emoji4] Deal?

http://images.tapatalk-cdn.com/15/11/04/b419d12eaa038faf917bd6517f6689 f0.jpg


Builder Of Badassery

[Nightcrawler]

Gates Green FTW! No belt slip even at 18psi.

[JimP]

I'll buy you three of your belts if you buy me just one for my ProCharger! [emoji4] Deal?

http://images.tapatalk-cdn.com/15/11/04/b419d12eaa038faf917bd6517f6689 f0.jpg


Builder Of Badassery

LOL! I had to go to three stores which brought me to the bad part of town. I couldn't find the gates green any where. The belt on the car turned out to be an acdelco 6k 1080, the thing was looong. The guy at the counter was able to clean the belt with glass cleaner and we were barely able to make out the number but we got it, kicker this was the only one in stock in this whole city.

The car is back together and it sings now, I'll need drag radials.

Thanks fellas for all the help!

[jass_BH]

Im using goodyear [emoji51]


Sent from my iPhone using Tapatalk

[Blackmobile]

Using the stock pulley the belt I use is:

Napa Micro-V 25
061080HD

Which is a fleet runner belt

Good to keep a spare in the trunk! :D