PDA

View Full Version : What Coolant Reservoir do I need?


BigCars4Ever
11-25-2015, 03:02 PM
What Coolant Reservoir do I need to install a Procharger? I know it is from a Town Car but what year?
justbob
11-25-2015, 03:37 PM
I used a 98-02 GM.


Builder Of Badassery
MOTOWN
11-25-2015, 03:39 PM
The Lincoln was a 93
BigCars4Ever
11-25-2015, 08:48 PM
I picked up a 2000 GM but I don't see how it will fit. I'll try it again but I'm going to try and find a 93 town car in the yard too. Thanks
BigCars4Ever
11-25-2015, 08:54 PM
Just looked up the 93 town car resevoir and it interchanges with the 92 to 97 vic/gm too. I'm sure I can find one of those in the yard. Anyone have a close up picture of the reservoir mounted?
justbob
11-25-2015, 09:15 PM
Sorry, mine is wrapped up tight in plastic and moving blankets. I will say mine was not a direct bolt in. I had to drill one or two holes but wasn't difficult by any means and looks right at home.

Let me see if I can find an old pic.


Builder Of Badassery
justbob
11-25-2015, 09:21 PM
Maybe I was wrong on the year, but I thought I yanked this off a 2000?

http://images.tapatalk-cdn.com/15/11/25/1385b5c930f334045299116b695d7f 07.jpg


Builder Of Badassery
BigCars4Ever
11-27-2015, 02:01 PM
That's exactly what I have but the fender liner is nothing like the one it came off of and only two of the three bolts on the reservoir even touch the Marauder fender liner.
CWright
11-27-2015, 06:36 PM
Maybe I was wrong on the year, but I thought I yanked this off a 2000?

http://images.tapatalk-cdn.com/15/11/25/1385b5c930f334045299116b695d7f 07.jpg


Builder Of Badassery



Man you need to clean that sucker! :D
justbob
11-27-2015, 08:34 PM
Man you need to clean that sucker! :D


It would NEVER be as clean as yours! Besides that it's too cold now. I clean it only wearing a surgical mask and flip flops.


Builder Of Badassery
Logizyme
11-27-2015, 08:39 PM
Should be any 92-97 panther. all 98+ have the same reservoir as marauders.
justbob
11-27-2015, 08:48 PM
That's exactly what I have but the fender liner is nothing like the one it came off of and only two of the three bolts on the reservoir even touch the Marauder fender liner.


I just went and checked and I see I managed to get all three studs in. The third will be on a sharp angle and probably not really necessary. Also I seem to remember digging out some longer bolts for it.

Thanks for having me look though! I see it was an area I never went back on later to address fit and finish. (Last second rush type stuff for dyno..) Another small detail on the list. [emoji4] I've never had a tire rub issue and mine is lowered quiet a bit. I'm still going to cut at least one angled spacer, trim down the others and use stainless washers w/nylon lock nuts.

Hope this helps.

http://images.tapatalk-cdn.com/15/11/27/eb56b235f33ca123729797cc6b9658 5c.jpg


Builder Of Badassery
justbob
11-27-2015, 08:54 PM
Should be any 92-97 panther. all 98+ have the same reservoir as marauders.


Honestly with the deadline I gave myself I was ordering, picking, pulling, and borrowing many things of many vehicles to have options and I'd trust you over me at this point! I still have half the crap here I didn't modify for use.


Builder Of Badassery