Page 1 of 2 12 LastLast
Results 1 to 15 of 27

Thread: Brand new Marauder crate motor

  1. #1

    Brand new Marauder crate motor

    I have a brand new motor still in the crate for 4k this is complete with wiring harness

  2. #2

    Wink

    Ummmm do you take payments? xxx down xxx a month no interest until april 2004? rooms to go does it....... just asking

  3. #3
    Join Date
    Nov 2002
    Location
    Las Vegas, NV
    Age
    75
    Posts
    431
    Dennis,

    How can a whole new engine be 4k and something that bolts onto it (SC) be 8k?
    2003 Marauder 1907 of 7838
    Built 06/24/02 Bought 10/25/02 Sold 1/5/19
    Reinhart chip,stat,plugs
    McGard locks
    Mercury logo valve/plate bolt caps
    Bob White black reflective letters
    Pioneer AVH-X2500BT
    Kicker 10" sub and 250 watt amp
    Gods Head spinners by Jerry

  4. #4
    Join Date
    Apr 2003
    Location
    Jersey Shore
    Age
    42
    Posts
    916
    Wait... what is that I detect??? Sarcasm???
    '03 300b - all the bolt-ons (SOLD)
    '93 Mustang Notch - restored w/ all the bolt-ons (SOLD)
    '97 F350 Powerstroke 5 spd, 4" straight pipe, 5" stacks, Rockford system, 35" tires...(SOLD)
    '95 Lightning - bolt-ons and susp (Totalled)
    '93 Stang Notch - full resto with autocross susp (SOLD)
    '01 Lightning - 3"/4" drop and full bolt-ons... FAST.

  5. #5
    Originally posted by Donald
    Dennis,

    How can a whole new engine be 4k and something that bolts onto it (SC) be 8k?

    Well thats what I want but you can pay more if you like

  6. #6
    Join Date
    Feb 2003
    Location
    Earth
    Posts
    8,598
    Blog Entries
    2
    Probably because they make over 10,000 of these engines a year on an assembly line. And ford buys from most if not all of the same suppliers billions $$ worth every year.

    It's called "economy of scale".
    1/4 Mile Time 11.542 @ 121.19 MPH
    195,000 Miles & 275+ Runs Down the 1,320’
    541.57 RWHP & 476.64 RWTQ on DynoJet
    Tuned by Aric at Injected Engineering
    Vortech Super Charger V-2 “T” Trim, 19 PSI
    8 Rib Belt, Innovators West 10% Overdrive Dampner
    Air to Air Intercooler, Mini-race Bypass
    Ford Cobra Remanufactured Long Block
    Snow Performance Water-Methanol Injection
    Kooks Headers & X Pipe
    GT MAF, 60lb injectors, Dash 8, Aero Rails, Twin Ford GT Pumps,
    Kinsler Fuel Filter, Kenne Bell Boost-A-Pump
    Monroe Sensatrac, Metco Control Arms, Addco Rear Sway Bar
    31 Ford Spline Axles & Detroit Truetrac, 4:10 Ford Racing Gears
    Dynotech MMC Driveshaft
    A-1 Performance Trans, Forced Tailshaft Lube, Carbon Clutches
    3,500 RPM Stall Precision Industries Torque Converter
    B&M Deep Finned Trans Pan
    AeroForce Scan Gauges , Auto Meter Oil, Fuel & Boost Gauges
    Kenny Brown Dead Pedal, 35% Tint, Silver Star Head Lights
    AutoPage Alarm RS-727LCD, Boston Acoustic NX87

  7. #7
    Join Date
    Jun 2003
    Location
    Roma, Texas (Rio Grande Valley in South Tx)
    Age
    45
    Posts
    105
    Dennis this is the original motor for 4k? I just messed up my motor last week and my insurance is paying for a new motor at 7k I believe. The problem is that it got approved yesterday and the dealership maybe already ordered it. If I can get it from u cheaper I'll have some x-tra cash. But I need to know if they have ordered it first. I hope they haven't to z maybe how we can arrange something!



    2003 Black MM
    -Born 08/02
    -Purchased 02/10/03
    -Died 10/12/03
    -New Motor Ordered 10/16/03
    -Rebirth 11/01/03
    -302 hp
    -6-disc cd changer
    -Limo tints rear, 20% tints front
    -SS Inserts
    -Everything else original so far!
    -R.I.P. 11/21/04

    '85 Ford F-150
    -302 motor
    -Limo tints
    -15" Centerline Sahara Wheels
    -Small Sound System

  8. #8
    I have the motor just call so we can disscuss this

  9. #9
    Join Date
    Jun 2003
    Location
    Roma, Texas (Rio Grande Valley in South Tx)
    Age
    45
    Posts
    105
    I just called the dealer and the motor has been ordered but it takes two weeks to get to them. He also pointed out that the warranty may not be any good if it isn't done thru them. Is that true?



    2003 Black MM
    -Born 08/02
    -Purchased 02/10/03
    -Died 10/12/03
    -New Motor Ordered 10/16/03
    -Rebirth 11/01/03
    -302 hp
    -6-disc cd changer
    -Limo tints rear, 20% tints front
    -SS Inserts
    -Everything else original so far!
    -R.I.P. 11/21/04

    '85 Ford F-150
    -302 motor
    -Limo tints
    -15" Centerline Sahara Wheels
    -Small Sound System

  10. #10
    Join Date
    Nov 2002
    Location
    Las Vegas, NV
    Age
    75
    Posts
    431
    Dennis,

    It was a serious question. I am told that the Vortech parts are around 2k. Just trying to understand what we get for the extra 6k.
    2003 Marauder 1907 of 7838
    Built 06/24/02 Bought 10/25/02 Sold 1/5/19
    Reinhart chip,stat,plugs
    McGard locks
    Mercury logo valve/plate bolt caps
    Bob White black reflective letters
    Pioneer AVH-X2500BT
    Kicker 10" sub and 250 watt amp
    Gods Head spinners by Jerry

  11. #11
    Join Date
    May 2003
    Location
    South Fl
    Age
    44
    Posts
    1,925
    donald, DR can correct me if i'm wrong, but that price prolly is just the blower itself. In the kit your getting more than just that. He spent a lot of time tuning it and custom made all the extra parts needed. Look for his SC thread for more intel.

  12. #12
    Originally posted by Donald
    Dennis,

    It was a serious question. I am told that the Vortech parts are around 2k. Just trying to understand what we get for the extra 6k.
    Donald,

    I've always found Dennis quite thorough when I've given him a call. He'll be glad to answer all your questions.

    Reinhart Automotive
    Ph: 904.276.5003

  13. #13
    Join Date
    Feb 2003
    Location
    Earth
    Posts
    8,598
    Blog Entries
    2
    Supercharger Packing List

    1 Vortech V-2 Supercharger Polished
    Vortech Supercharger bracket with hardware bag and idler pulley
    K&N Filter with Maff relocation kit and hardware
    4" flex tubing. 36" long
    8 Fuel 42 LB Injectors part
    Custom Fan shroud with brackets
    Aftercooler reservoir w/hardware bag
    High Volume Heat exchanger with powder coated Bracket
    Custom after cooler with fittings
    High Volume water Electric Booster Pump with hardware and remote LED
    New coolant reservoir (w/o cap)
    Modified coolant crossover pipe (core charge if not returned)
    1/8" powdercoated steel ‘A’ bracket approx. 31" long
    3" black plastic elbow w/3/4" barbed nipple
    3" black plastic elbow w/ 90deg. 5/8" barbed fitting
    Custom silver bracket with 3 ½" hole
    Ported vacuum valve Bosch by pass valve
    ¾" 90 degree barbed elbow (plastic)
    8" powdercoated air pipe w/2 welded female fittings welded in.
    16" powdercoated air pipe w/1 ¾" female fitting welded in
    Coolant hose w/2 90 deg. Bends # 593 12 ½" long.
    5/8" coolant hose w/ 90 deg. Bend # 4106 36" long
    1" coolant hose 12" long.
    10" clear tubing with female brass fitting on end. (Heat exch.to pump)
    112" of 5/8" coolant hose.
    62" coolant hose w/ 90 deg bend
    48" coolant hose w/ 90 deg. Bend
    Custom coolant hose ‘Y’ junction block w/ metal sleeve and J shape return hose.
    Various sized Hose clamps.
    Custom Mass Air flow Sensor wiring Harness with Intake air Temperature sensor and Harness.
    Two Vacuum T fittings with 4" vacuum hose
    High Volume Twin Cobra Fuel pump assembly (core charge if not returned)

    The best tuning availble in the United States our tuning is dyno proven every day, Single Delta Chip is included or EEC Flash

    Technical support customer service, six days a week.

    I beleive you are talking about the S/C only and not the aftercooler or intercooler + associated parts. Kinda like the difference between a short block and long block assembly.
    1/4 Mile Time 11.542 @ 121.19 MPH
    195,000 Miles & 275+ Runs Down the 1,320’
    541.57 RWHP & 476.64 RWTQ on DynoJet
    Tuned by Aric at Injected Engineering
    Vortech Super Charger V-2 “T” Trim, 19 PSI
    8 Rib Belt, Innovators West 10% Overdrive Dampner
    Air to Air Intercooler, Mini-race Bypass
    Ford Cobra Remanufactured Long Block
    Snow Performance Water-Methanol Injection
    Kooks Headers & X Pipe
    GT MAF, 60lb injectors, Dash 8, Aero Rails, Twin Ford GT Pumps,
    Kinsler Fuel Filter, Kenne Bell Boost-A-Pump
    Monroe Sensatrac, Metco Control Arms, Addco Rear Sway Bar
    31 Ford Spline Axles & Detroit Truetrac, 4:10 Ford Racing Gears
    Dynotech MMC Driveshaft
    A-1 Performance Trans, Forced Tailshaft Lube, Carbon Clutches
    3,500 RPM Stall Precision Industries Torque Converter
    B&M Deep Finned Trans Pan
    AeroForce Scan Gauges , Auto Meter Oil, Fuel & Boost Gauges
    Kenny Brown Dead Pedal, 35% Tint, Silver Star Head Lights
    AutoPage Alarm RS-727LCD, Boston Acoustic NX87

  14. #14
    Join Date
    Nov 2002
    Location
    St. John, IN
    Age
    45
    Posts
    14,251
    I can justify 2 grand of what I spent every time I call Dennis, day or night, Saturday or Sunday, 24 hours a day. Its hard to find tech support and make a friend at the same time these days.

  15. #15
    Join Date
    Feb 2003
    Location
    Earth
    Posts
    8,598
    Blog Entries
    2
    To answer your question if you compare the kit to similar kits for the 4V Mustang that are polished, have the cobra fuel pumps and the aftercooler system you are looking at close to the same price.

    Keep in mind there are 100's of thousands of mustangs and only 15K MM.

    Generally speaking just based on the volume resulting in econmmies of scale proprietary performance parts for mustangs are usually going to cost less than they do for the MM.
    1/4 Mile Time 11.542 @ 121.19 MPH
    195,000 Miles & 275+ Runs Down the 1,320’
    541.57 RWHP & 476.64 RWTQ on DynoJet
    Tuned by Aric at Injected Engineering
    Vortech Super Charger V-2 “T” Trim, 19 PSI
    8 Rib Belt, Innovators West 10% Overdrive Dampner
    Air to Air Intercooler, Mini-race Bypass
    Ford Cobra Remanufactured Long Block
    Snow Performance Water-Methanol Injection
    Kooks Headers & X Pipe
    GT MAF, 60lb injectors, Dash 8, Aero Rails, Twin Ford GT Pumps,
    Kinsler Fuel Filter, Kenne Bell Boost-A-Pump
    Monroe Sensatrac, Metco Control Arms, Addco Rear Sway Bar
    31 Ford Spline Axles & Detroit Truetrac, 4:10 Ford Racing Gears
    Dynotech MMC Driveshaft
    A-1 Performance Trans, Forced Tailshaft Lube, Carbon Clutches
    3,500 RPM Stall Precision Industries Torque Converter
    B&M Deep Finned Trans Pan
    AeroForce Scan Gauges , Auto Meter Oil, Fuel & Boost Gauges
    Kenny Brown Dead Pedal, 35% Tint, Silver Star Head Lights
    AutoPage Alarm RS-727LCD, Boston Acoustic NX87

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •