Page 1 of 3 123 LastLast
Results 1 to 15 of 32

Thread: Progard rear plastic skid plate?

  1. #1
    Join Date
    Jan 2013
    Location
    Long island NY
    Age
    34
    Posts
    30

    Progard rear plastic skid plate?

    I had one on my marauder back it the day, helped with the rear lower sag. Does anyone no if they are still made, if not any substitute for them?

    Thanks
    2003 300A -Sold

    2004 DTR

    2008 P71

  2. #2
    Join Date
    Oct 2005
    Location
    Southwest Florida, Lee County
    Age
    54
    Posts
    3,423
    Mine is still attached and happy after a decade. I'd be happy to make paper templates and send them in cardboard tubes if anybody decides to make their own from sheet ABS.
    '04 Silver Marauder w/ sunroof - HID lighting, JL Audio / Eclipse DVD/NAV/iPod/camera, 4.10's, 2" drop, Progard Bumper Baffle, Delete tips, Billet Pedals, BC4E dead pedal, Lidio Tune, Mach1 chin spoiler, K&N CAI, TCE lines, Super40's, tinted tails, SS Inserts, Heinous Control Arms, Real oil gauge, lighted door handles. Currently installing Eaton M112.

    2004 Mercury Marauder
    Born March 2004, adopted October 2005. Sold January 2012, adopted AGAIN January 2016
    2,187 of 3,214
    997 in Silver Birch
    448 with light flint interior
    304 with heated seats
    336 with sunroof

  3. #3
    Join Date
    Nov 2014
    Location
    KC
    Age
    48
    Posts
    3,511
    Silver car has one and I too need to draw it out on paper and make some for friends here in Kansas area


    Any idea what kind of plastic this stuff is? Since we're talking about them
    The twins2.3 whipple/aluminatorVortech V-2 lots of goodies

    Current marauders
    04 DTR totaled JUST NOW starting to part out 7-21-2021 https://youtu.be/REUxjP1BVpg

    04 Silver Birch Dark Charcoal Hardtop Whipple Supercharger
    04 Silver Birch Dark Charcoal Hardtop V2 Supercharger
    04 Silver Birch Dark Charcoal Converted
    03 DBP Light Flint #122
    03 DBP Dark Charcoal #232
    03 Silver Birch 300b Light Flint Going to fix er up
    03 Black 300a
    04 Silver Birch Dark Charcoal moonroof in the works

    04 Heaton Swapped DTR
    Joe's Wrecked DTR rebuild thread

  4. #4
    Join Date
    Jun 2011
    Location
    Northeast OH
    Posts
    7,999
    Doubtful it is available with crown vic police cars being dicontinued for over 5 years now, as that is where they were designed for. Call or email Progard, they don't sell direct but can give you fleet suppliers in your state that used to sell them.
    Last edited by RubberCtyRauder; 01-08-2017 at 06:35 AM.
    2004 SB Ported Trilogy 48
    Has supporting mods and stuff
    Thanks to Marty O for his help in updating this car.

    R.I.P.
    Rex "SC Cheesehead"

  5. #5
    Join Date
    Jan 2003
    Location
    Near Knoxville TN
    Age
    67
    Posts
    10,717
    I bought 3 last year. One for the car that got rear ended, another for the new car, and a spare. Check with Pro-Gard to find a distributor, they do not sell direct to customer. My local distributor is a gun shop that supplies equipment to police departments. The part number is not listed in the latest catalog. I don't know if it was old stock or made-to-order. There is a thread somewhere which has the part number.
    Thanks to Darrin @ BC Automotive:
    $1800 and it was worse than when he started!

    Brian (FordNut) FPG # 1458 of 7838
    03 MM 300A (Lotsa mods, 130k mi) was 303rwhp/318rwtq N/A
    then 476/410 D1SC ProCharged on stock block
    then 660/555 D1SC PC on 5.3 wet sleeved Teksid alum big bore stroker
    then 365/369 N/A on 5.3 wet sleeved Teksid alum big bore stroker
    Now 751/617 3.4L Whipple on 5.3 Boss5.0 iron big bore stroker

    03 MM 300B Silver (Mostly stock, originally wife's car, 370k mi) FPG # 7053 of 7838 or 49 of 417 SB
    03 MM 300B Silver, Stock, wife's next one, 136k mi FPG # 7134 of 7838 or 89 of 417 SB
    04 MM Silver, Stock, on standby 85k mi, FPG # 1212 of 3214 or 432 of 997 SB
    01 F150 longbed
    01 F150 shortbed
    00 F150 4x4 stepside
    01 F150 4x4 7700
    68 Stang FB (70 351C 4V, 4 wheel discs, project car)

    Mods listed here (some items not current): FordNut's Mods

  6. #6
    Join Date
    Mar 2014
    Location
    Sumter South Carolina
    Age
    69
    Posts
    333

    ProGard

    The install instructions are attached for the ProGard skid plate. Maybe it will help someone.
    Attached Files Attached Files
    2004 Mercury Marauder - Silver Birch
    2003 Mercury Marauder - Dark Blue Pearl
    2003 Mercury Grand Marquis LS - Aspen Green
    2002 Ford F150 Crew Cab - Silver Metallic
    1997 Ford F150 4x4 - Vermillion Red - Silver Frost

  7. #7
    Join Date
    Nov 2009
    Location
    Ontario Canada
    Age
    53
    Posts
    412
    Hmm I wondered what those were and where they came from. My MM has it under the trunk to the rear bumper, there are small panels on the front bumper just before tires. I was wondering why the Blue I had didn't have them and this one did.
    1987 GN running 10's. 2003 MM Blue Sold and dearly missed!
    2003 Black 300B
    Procharger P1sc with air to air intercooler
    3,000 PI converter
    4.10 Eaton posi 31 spline carrier
    Moser 31 spline axles
    Koos headers, with custom stainless exhaust, Megs tips
    Carbon fiber drive shaft
    Metco control arms
    Every autometer procomp gauge in the catalogue

  8. #8
    Join Date
    May 2009
    Location
    Moreau Island
    Posts
    12,207
    Quote Originally Posted by JimP View Post
    Hmm I wondered what those were and where they came from. My MM has it under the trunk to the rear bumper, there are small panels on the front bumper just before tires. I was wondering why the Blue I had didn't have them and this one did.
    The front ones are factory installed, and as I recall help divert air for cooling.

  9. #9
    Join Date
    Nov 2014
    Location
    KC
    Age
    48
    Posts
    3,511
    The oem marauder ones are the same as the 07 and newer CV cop cars, maybe even the same as the MGM

    My DTR ones were broken up front, pulled some from a few newer cop cars and they were identicle At the time I tried to buy new, marauder were obsolete and the CV ones were expensive

    Junk yard 3.00 part
    The twins2.3 whipple/aluminatorVortech V-2 lots of goodies

    Current marauders
    04 DTR totaled JUST NOW starting to part out 7-21-2021 https://youtu.be/REUxjP1BVpg

    04 Silver Birch Dark Charcoal Hardtop Whipple Supercharger
    04 Silver Birch Dark Charcoal Hardtop V2 Supercharger
    04 Silver Birch Dark Charcoal Converted
    03 DBP Light Flint #122
    03 DBP Dark Charcoal #232
    03 Silver Birch 300b Light Flint Going to fix er up
    03 Black 300a
    04 Silver Birch Dark Charcoal moonroof in the works

    04 Heaton Swapped DTR
    Joe's Wrecked DTR rebuild thread

  10. #10
    Join Date
    Feb 2005
    Location
    ModdedMarauders.net
    Posts
    3,044
    I have an extra one

  11. #11
    Join Date
    Feb 2011
    Location
    New Jersey
    Age
    40
    Posts
    1,189
    I would like to find one

  12. #12
    Join Date
    Jan 2003
    Location
    Near Knoxville TN
    Age
    67
    Posts
    10,717
    Quote Originally Posted by Mr. Man View Post
    The front ones are factory installed, and as I recall help divert air for cooling.
    and protect fog lights
    Thanks to Darrin @ BC Automotive:
    $1800 and it was worse than when he started!

    Brian (FordNut) FPG # 1458 of 7838
    03 MM 300A (Lotsa mods, 130k mi) was 303rwhp/318rwtq N/A
    then 476/410 D1SC ProCharged on stock block
    then 660/555 D1SC PC on 5.3 wet sleeved Teksid alum big bore stroker
    then 365/369 N/A on 5.3 wet sleeved Teksid alum big bore stroker
    Now 751/617 3.4L Whipple on 5.3 Boss5.0 iron big bore stroker

    03 MM 300B Silver (Mostly stock, originally wife's car, 370k mi) FPG # 7053 of 7838 or 49 of 417 SB
    03 MM 300B Silver, Stock, wife's next one, 136k mi FPG # 7134 of 7838 or 89 of 417 SB
    04 MM Silver, Stock, on standby 85k mi, FPG # 1212 of 3214 or 432 of 997 SB
    01 F150 longbed
    01 F150 shortbed
    00 F150 4x4 stepside
    01 F150 4x4 7700
    68 Stang FB (70 351C 4V, 4 wheel discs, project car)

    Mods listed here (some items not current): FordNut's Mods

  13. #13
    Join Date
    Dec 2002
    Location
    north nj (Planet Houston)
    Posts
    771
    Just contacted them about finding a dealer who has the u200fr in NJ. Looks like they still make them:

    Good morning,

    Thank you for contacting us. We do still have these available. Below is a list of dealers in NJ you can contact to make a purchase. Thank you again.

    EAST COAST EMERGENCY LIGHTING, MILLSTONE TOWNSHIP, NJ, 732-940-2211
    WINNER FORD, CHERRY HILL, NJ, 856-428-4000
    BEYER FLEET, EAST HANOVER, NJ, 973-319-7000
    GENERAL SALES ADMINISTRATION, KENVIL, NJ, 973-584-7714
    MUNICIPAL EQUIPMENT ENTERPRISE, EGG HARBOR TWP, NJ, 609-484-0555

    MICHAEL YOUNG
    Sales Manager

    Pro-gard Products - AOI Electrical
    9650 East 148th Street
    Noblesville, IN 46060

    p 317.579.6680
    800.480.6680
    f 888-776-2526
    c 317.358.6211

    pro-gard.com
    aoielectrical.com
    safestopintl.com
    "Come to me, Superman! I defy you! Come and kneel before Zod! Zod! "

  14. #14
    Join Date
    Nov 2012
    Location
    Sacramento
    Posts
    3,737
    Does anyone know if these come with the "brackets" to attach them? I recall a member here sold a better kit with mounting brackets....


    Also would be neat to paint the the godshead logo on these... so when car is on rack....


    2003 300A Black, #4918 of 7838, 17,400 Miles
    Tune, KYB's, JLT, FlowMaster 42441, Res Delete, New BFG's, 8 coats of zymoil Titanium

    2003 300B Silver Birch, #21 of 419, 29,800 miles
    Tune, JLT, FlowMaster 42441 Res Delete, New Nitto 235/255 Bigcarsforever dead peddle & custom SRP peddles, 5 coats Zymoil Titanium, Addco front and rear sway bars, KYBs, 1/2 inch coil cut, Sparta Watts link and Control Arms, Carfixer alignment.

    2003 CV Sport Matador Red, 19,280 Miles, DD, Curless Full Service Royal flush, Marto Tune, 18 Chrome Wheels w 235/265 front/back Nitto tires, NEW OEM Sport Springs -1 coil & Monroe Severe Duty (front) shocks, Addco front and rear sway bars, KYB rear Shocks, Carfixer Alignment.

    2004 CV HPP Silver Birch, 93,000 miles. Son's DD, 18 Chrome Wheels w 235/265 front/back Nitto tires (thank you Lowndex!)

  15. #15
    Join Date
    Jun 2008
    Location
    44077-3545
    Age
    42
    Posts
    5,274
    Quote Originally Posted by 1Marauder View Post
    I recall a member here sold a better kit with mounting brackets....
    Yeah, the musclemerc skid plate. I have one on my car and love it.
    '03 Marauder | '91 Country Squire | '18 Flex Ecoboost | '92 Shadow VT1100
    former Panthers: '02 MGM, '04 MGM, '04 MGM v2.0, '04 MM, '07 P71 w/5-speed, '04 CVLX, '03 SAP P71, '10 P7B
    CLICK HERE and have your Marauder's COA info added to the database!!! | 2003 list ||| 2004 list
    Quote Originally Posted by offroadkarter View Post
    Reinhart's tuning skills were comparable to an ape slapping the keyboard in microsoft excel.

Page 1 of 3 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Window Tint
    By PAPAJOHN in forum Community Discussion
    Replies: 15
    Last Post: 11-11-2010, 04:31 PM
  2. Remote Electric Fuel Door Install for 300B (Part 1 of 2)
    By vegasmarauder in forum Shop Talk
    Replies: 6
    Last Post: 10-19-2004, 08:15 PM
  3. Converter Torque Multiplication:
    By BillyGman in forum Shop Talk
    Replies: 18
    Last Post: 08-21-2003, 06:24 AM
  4. Replaced Rear Badge With 100 Yr Plate
    By schuvwj in forum Community Discussion
    Replies: 6
    Last Post: 07-05-2003, 07:22 AM
  5. Can i put two more plate screws in the rear plate?
    By tetsu in forum Community Discussion
    Replies: 1
    Last Post: 07-29-2002, 10:32 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •