Im looking to buy a supercharger around Christmas time and having mixed feeling now. I was always sold on 2.9 whipple especially being that they recently releasted Gen3. On the other hand I been hearing ALOT of buzz about New VMP 2650 on Numerous Mustang site. There saying the VMP will make more torque. Can someone please chime in? What would you prefer? Pro & Cons? This is Serious business im not being an askhole. I DO NOT want to regret decision
You can't go wrong either way having drove CWrights 2.9L Whipple build I know you definetly wouldn't be unhappy with the 2.9L Whipple , the VMP is a beast also but I would go Whipple and never look back.
I run a TVS so my opinion is bias. The TVS will yield lower IAT's. The quickest 5.0 is running a TVS. The TVS 2650 screw pack design is in a class of its own
Last edited by musclemerc; 09-05-2018 at 03:41 AM.
Before the advice what are your future goals with the car? Want to race it, if so do you plan on ever utilizing race gas or e85, is it just a street car etc etc.
Sent from my iPhone using Tapatalk
If it's cheap and reliable it isn't fast
If it's cheap and fast it isn't reliable
If it's fast and reliable it isn't cheap
If you have no plans to Drag Race this is the best option;
DragFX OBDII Synthetic Musclecar Sound Simulator
1/4 Mile Time 11.542 @ 121.19 MPH
195,000 Miles & 275+ Runs Down the 1,320’
541.57 RWHP & 476.64 RWTQ on DynoJet
Tuned by Aric at Injected Engineering
Vortech Super Charger V-2 “T” Trim, 19 PSI
8 Rib Belt, Innovators West 10% Overdrive Dampner
Air to Air Intercooler, Mini-race Bypass
Ford Cobra Remanufactured Long Block
Snow Performance Water-Methanol Injection
Kooks Headers & X Pipe
GT MAF, 60lb injectors, Dash 8, Aero Rails, Twin Ford GT Pumps,
Kinsler Fuel Filter, Kenne Bell Boost-A-Pump
Monroe Sensatrac, Metco Control Arms, Addco Rear Sway Bar
31 Ford Spline Axles & Detroit Truetrac, 4:10 Ford Racing Gears
Dynotech MMC Driveshaft
A-1 Performance Trans, Forced Tailshaft Lube, Carbon Clutches
3,500 RPM Stall Precision Industries Torque Converter
B&M Deep Finned Trans Pan
AeroForce Scan Gauges , Auto Meter Oil, Fuel & Boost Gauges
Kenny Brown Dead Pedal, 35% Tint, Silver Star Head Lights
AutoPage Alarm RS-727LCD, Boston Acoustic NX87
I plan to run e85 and was still researching if Crusher upgrade was worth it... Now im starting to lean toward TVS. But would TVS still kick whipple even with crusher upgrade. Im trying to go balls to the wall and squeeze every little HP I can, looking for Modular Head Shop to do some surgery to my heads for extra HP $3-4000 (still researching gain to see if it worth it) or if money can be spent elsewhere
I plan to run e85 and was still researching if Crusher upgrade was worth it... Now im starting to lean toward TVS. But would TVS still kick whipple even with crusher upgrade. Im trying to go balls to the wall and squeeze every little HP I can, looking for Modular Head Shop to do some surgery to my heads for extra HP $3-4000 (still researching gain to see if it worth it) or if money can be spent elsewhere
I would assume stock heads untouched would be able to make north of 800 rwhp. Just turn the boost up.
3-4 grand for head porting and new valves???? Ummm no.
The twins2.3 whipple/aluminatorVortech V-2 lots of goodies
04 Silver Birch Dark Charcoal Hardtop Whipple Supercharger
04 Silver Birch Dark Charcoal Hardtop V2 Supercharger
04 Silver Birch Dark Charcoal Converted
03 DBP Light Flint #122
03 DBP Dark Charcoal #232
03 Silver Birch 300b Light Flint Going to fix er up
03 Black 300a
04 Silver Birch Dark Charcoal moonroof in the works
I plan to run e85 and was still researching if Crusher upgrade was worth it... Now im starting to lean toward TVS. But would TVS still kick whipple even with crusher upgrade. Im trying to go balls to the wall and squeeze every little HP I can, looking for Modular Head Shop to do some surgery to my heads for extra HP $3-4000 (still researching gain to see if it worth it) or if money can be spent elsewhere
E85 and going for kill I would have to say go with the 2.9. The crusher being worth it is a toss up IMHO.
With that being said, the reliability of an Eaton, it being the torque monster that it is even on pump(although I’ve yet to see any data on the 2.65 on a 4.6L) and the the fact that you can get the blower, GT500 inlet and the throttle body that goes with the inlet for the price of just the 2.9 blower itself (I believe) is a really good selling point.
Not to mention the blower does hold its own just fine to a certain extent (and the extent is for those that are going completely in when it comes to having all the boost) anything under that and I think most would be extremely happy with a 2.65 and E85.
Bypass the head work especially at that price, I would recommend one spend that money on some fuel upgrades which you are going to need for E85 anyways, injectors, fuel pumps, wheels to put the power down etc etc.
Edit. Seems the 2.65 actually starts at $4k that make it a harder choice.
Sent from my iPhone using Tapatalk
Last edited by blkZooM; 09-06-2018 at 12:47 AM.
If it's cheap and reliable it isn't fast
If it's cheap and fast it isn't reliable
If it's fast and reliable it isn't cheap
If you are going all out and get the whipple, get the crusher with it.
The torque numbers are down on the 2650 from the 2300 blowers from a couple cars that have numbers from the 2650. Would have to dig up some 2.9 graphs to compare with the 2650.
BTW I order Diamond piston 5cc Manley rods and and forged Eagle crank, teskid 0.20 over...think im going with Stainless works exhaust 2.5 or 3"...which ever is better... So which every charger will do... I really have to find out if 2.65 TVS will need alot of modifying to fit in Marauder.