Page 2 of 3 FirstFirst 123 LastLast
Results 16 to 30 of 34

Thread: Console instrument pod and bracket, speedometer cluster, visors

  1. #16
    Join Date
    Nov 2014
    Location
    KC
    Age
    48
    Posts
    3,511
    f left and right visors with the extra "flap". Lighting connection for mirrors is intact. $55.00

    I am doing a light flint to dark charcoal conversion

    I don't see the middle plastic pieces, basically opposite ends of pivot

    Any idea if you have them too? I am looking to buy dark charcoal visors with those middle pieces

    Let me know if you have them or not
    Thank you
    The twins2.3 whipple/aluminatorVortech V-2 lots of goodies

    Current marauders
    04 DTR totaled JUST NOW starting to part out 7-21-2021 https://youtu.be/REUxjP1BVpg

    04 Silver Birch Dark Charcoal Hardtop Whipple Supercharger
    04 Silver Birch Dark Charcoal Hardtop V2 Supercharger
    04 Silver Birch Dark Charcoal Converted
    03 DBP Light Flint #122
    03 DBP Dark Charcoal #232
    03 Silver Birch 300b Light Flint Going to fix er up
    03 Black 300a
    04 Silver Birch Dark Charcoal moonroof in the works

    04 Heaton Swapped DTR
    Joe's Wrecked DTR rebuild thread

  2. #17
    Join Date
    Nov 2014
    Location
    KC
    Age
    48
    Posts
    3,511
    3rd SB NA car getting the works
    Last edited by Turbov6Bryan; 01-23-2019 at 01:06 PM.
    The twins2.3 whipple/aluminatorVortech V-2 lots of goodies

    Current marauders
    04 DTR totaled JUST NOW starting to part out 7-21-2021 https://youtu.be/REUxjP1BVpg

    04 Silver Birch Dark Charcoal Hardtop Whipple Supercharger
    04 Silver Birch Dark Charcoal Hardtop V2 Supercharger
    04 Silver Birch Dark Charcoal Converted
    03 DBP Light Flint #122
    03 DBP Dark Charcoal #232
    03 Silver Birch 300b Light Flint Going to fix er up
    03 Black 300a
    04 Silver Birch Dark Charcoal moonroof in the works

    04 Heaton Swapped DTR
    Joe's Wrecked DTR rebuild thread

  3. #18
    Join Date
    Jun 2009
    Location
    Warsaw, Indiana
    Posts
    321
    No, sorry what you see is all I got. I've had that for a couple of years but I only just unpacked the box recently.

    Sent from my SM-N950U using Tapatalk
    Ride 1: 2003 300-A MM, black (naturally), K&N cold air, Granitelli Racing coils, Kybe shocks, Autometer "real" oil pressure and voltmeter, 14 inch front rotors and stainless lines from TCE with 6-piston Wilwood calipers and Hawk HPS pads, cryo-treated slotted rear rotors with TCE stainless lines and Hawk HPS pads, tune by Lidio, LED headlamps. Coming Soon: LED foglights, 200 Amp Alternator.

    Ride 2: 2001 Kenny Brown "Panther 2" Crown Victoria, Black. K&N cold air intake to Allen Engine Development supercharger system with water-to-air intercooled Eaton MP-90 at 8 pounds. Extensive chassis bracing, Brembo 4-piston front calipers on 13 inch rotors with stainless lines. Trunk-relocated Optima Red-Top. 5000K Bi-Xenon HID's. And much, much more.

  4. #19
    Join Date
    Jan 2003
    Location
    Hiram, Georgia
    Age
    61
    Posts
    17,780
    Thanks to a great seller!!

  5. #20
    Join Date
    Feb 2007
    Location
    over here, with the 40's of beer.
    Age
    21
    Posts
    9,026
    Quote Originally Posted by martyo View Post
    Thanks to a great seller!!


    Thanks, was mine originally, I only got $8 for it though.


    Sent from my iPhone using Tapatalk
    I LOVE Jerry's bar, it's my kinda place...........






    When you are dead, you don’t know you are dead. It is difficult only for others. It is the same way when you are stupid.

    "Chuck Norris built my stock longblock. It runs on the tears of small children and makes 10,000 hp. He said it's his 'street version' "


    Trilogy # 192 / T.S. 0012

    BOOST GETS YOU FELONY STOPPED!!!





  6. #21
    Join Date
    Jan 2003
    Location
    Hiram, Georgia
    Age
    61
    Posts
    17,780
    Quote Originally Posted by Spectragod View Post
    Thanks, was mine originally, I only got $8 for it though.
    I never begrudge a man his profit on $8.

  7. #22
    Join Date
    Jun 2009
    Location
    Warsaw, Indiana
    Posts
    321
    Well, there was an 8 in the price, but I think there were a couple of additional digits in the price.

    Sent from my SM-N950U using Tapatalk
    Ride 1: 2003 300-A MM, black (naturally), K&N cold air, Granitelli Racing coils, Kybe shocks, Autometer "real" oil pressure and voltmeter, 14 inch front rotors and stainless lines from TCE with 6-piston Wilwood calipers and Hawk HPS pads, cryo-treated slotted rear rotors with TCE stainless lines and Hawk HPS pads, tune by Lidio, LED headlamps. Coming Soon: LED foglights, 200 Amp Alternator.

    Ride 2: 2001 Kenny Brown "Panther 2" Crown Victoria, Black. K&N cold air intake to Allen Engine Development supercharger system with water-to-air intercooled Eaton MP-90 at 8 pounds. Extensive chassis bracing, Brembo 4-piston front calipers on 13 inch rotors with stainless lines. Trunk-relocated Optima Red-Top. 5000K Bi-Xenon HID's. And much, much more.

  8. #23
    Join Date
    Feb 2007
    Location
    over here, with the 40's of beer.
    Age
    21
    Posts
    9,026
    Quote Originally Posted by SteelQualityMan View Post
    Well, there was an 8 in the price, but I think there were a couple of additional digits in the price.

    Sent from my SM-N950U using Tapatalk

    I got $8, wifey got the rest.
    I LOVE Jerry's bar, it's my kinda place...........






    When you are dead, you don’t know you are dead. It is difficult only for others. It is the same way when you are stupid.

    "Chuck Norris built my stock longblock. It runs on the tears of small children and makes 10,000 hp. He said it's his 'street version' "


    Trilogy # 192 / T.S. 0012

    BOOST GETS YOU FELONY STOPPED!!!





  9. #24
    Join Date
    Jun 2009
    Location
    Warsaw, Indiana
    Posts
    321

    Wink

    Quote Originally Posted by SteelQualityMan View Post
    Since I will be selling the car shortly, all the spare parts I hoarded must go. All parts are OBO, but please no $8.00 bids. Shipping included UPS ground or USPS to lower 48

    One speedometer cluster in good condition, showing 160,134 miles. $230.00

    There is a member here who can reset this mileage for you, and replace the lamps with LEDs. Make arrangements with him and I will ship i to him for modification.

    One console gauge pod with original Ford gauges. $SOLD

    One console gauge pod bracket $SOLD

    Pod and bracket together $SOLD

    Set of left and right visors with the extra "flap". Lighting connection for mirrors is intact. $45.00
    Bump for weekend price cuts!
    Ride 1: 2003 300-A MM, black (naturally), K&N cold air, Granitelli Racing coils, Kybe shocks, Autometer "real" oil pressure and voltmeter, 14 inch front rotors and stainless lines from TCE with 6-piston Wilwood calipers and Hawk HPS pads, cryo-treated slotted rear rotors with TCE stainless lines and Hawk HPS pads, tune by Lidio, LED headlamps. Coming Soon: LED foglights, 200 Amp Alternator.

    Ride 2: 2001 Kenny Brown "Panther 2" Crown Victoria, Black. K&N cold air intake to Allen Engine Development supercharger system with water-to-air intercooled Eaton MP-90 at 8 pounds. Extensive chassis bracing, Brembo 4-piston front calipers on 13 inch rotors with stainless lines. Trunk-relocated Optima Red-Top. 5000K Bi-Xenon HID's. And much, much more.

  10. #25
    Join Date
    Jun 2009
    Location
    Warsaw, Indiana
    Posts
    321
    BUMP FOR RADICAL/ WEEKEND SPECIAL PRICE CUTS
    Ride 1: 2003 300-A MM, black (naturally), K&N cold air, Granitelli Racing coils, Kybe shocks, Autometer "real" oil pressure and voltmeter, 14 inch front rotors and stainless lines from TCE with 6-piston Wilwood calipers and Hawk HPS pads, cryo-treated slotted rear rotors with TCE stainless lines and Hawk HPS pads, tune by Lidio, LED headlamps. Coming Soon: LED foglights, 200 Amp Alternator.

    Ride 2: 2001 Kenny Brown "Panther 2" Crown Victoria, Black. K&N cold air intake to Allen Engine Development supercharger system with water-to-air intercooled Eaton MP-90 at 8 pounds. Extensive chassis bracing, Brembo 4-piston front calipers on 13 inch rotors with stainless lines. Trunk-relocated Optima Red-Top. 5000K Bi-Xenon HID's. And much, much more.

  11. #26
    Join Date
    Nov 2014
    Location
    KC
    Age
    48
    Posts
    3,511
    Quote Originally Posted by SteelQualityMan View Post
    Since I will be selling the car shortly, all the spare parts I hoarded must go. All parts are OBO, but please no $8.00 bids. Shipping included UPS ground or USPS to lower 48

    One speedometer cluster in good condition, showing 160,134 miles. $150.00

    There is a member here who can reset this mileage for you, and replace the lamps with LEDs. Make arrangements with him and I will ship i to him for modification.

    One console gauge pod with original Ford gauges. $SOLD

    One console gauge pod bracket $SOLD

    Pod and bracket together $SOLD

    Set of left and right visors with the extra "flap". Lighting connection for mirrors is intact. $25.00

    If the price is still 25.00 I will take the visors
    The twins2.3 whipple/aluminatorVortech V-2 lots of goodies

    Current marauders
    04 DTR totaled JUST NOW starting to part out 7-21-2021 https://youtu.be/REUxjP1BVpg

    04 Silver Birch Dark Charcoal Hardtop Whipple Supercharger
    04 Silver Birch Dark Charcoal Hardtop V2 Supercharger
    04 Silver Birch Dark Charcoal Converted
    03 DBP Light Flint #122
    03 DBP Dark Charcoal #232
    03 Silver Birch 300b Light Flint Going to fix er up
    03 Black 300a
    04 Silver Birch Dark Charcoal moonroof in the works

    04 Heaton Swapped DTR
    Joe's Wrecked DTR rebuild thread

  12. #27
    Join Date
    Nov 2014
    Location
    KC
    Age
    48
    Posts
    3,511
    $ sent for visors

    I sent a little more than asking price

    Thank you
    The twins2.3 whipple/aluminatorVortech V-2 lots of goodies

    Current marauders
    04 DTR totaled JUST NOW starting to part out 7-21-2021 https://youtu.be/REUxjP1BVpg

    04 Silver Birch Dark Charcoal Hardtop Whipple Supercharger
    04 Silver Birch Dark Charcoal Hardtop V2 Supercharger
    04 Silver Birch Dark Charcoal Converted
    03 DBP Light Flint #122
    03 DBP Dark Charcoal #232
    03 Silver Birch 300b Light Flint Going to fix er up
    03 Black 300a
    04 Silver Birch Dark Charcoal moonroof in the works

    04 Heaton Swapped DTR
    Joe's Wrecked DTR rebuild thread

  13. #28
    Join Date
    Jun 2009
    Location
    Warsaw, Indiana
    Posts
    321
    They will ship Saturday. Thank you!

    Sent from my SM-N950U using Tapatalk
    Ride 1: 2003 300-A MM, black (naturally), K&N cold air, Granitelli Racing coils, Kybe shocks, Autometer "real" oil pressure and voltmeter, 14 inch front rotors and stainless lines from TCE with 6-piston Wilwood calipers and Hawk HPS pads, cryo-treated slotted rear rotors with TCE stainless lines and Hawk HPS pads, tune by Lidio, LED headlamps. Coming Soon: LED foglights, 200 Amp Alternator.

    Ride 2: 2001 Kenny Brown "Panther 2" Crown Victoria, Black. K&N cold air intake to Allen Engine Development supercharger system with water-to-air intercooled Eaton MP-90 at 8 pounds. Extensive chassis bracing, Brembo 4-piston front calipers on 13 inch rotors with stainless lines. Trunk-relocated Optima Red-Top. 5000K Bi-Xenon HID's. And much, much more.

  14. #29
    Join Date
    Jun 2009
    Location
    Warsaw, Indiana
    Posts
    321
    Quote Originally Posted by SteelQualityMan View Post
    They will ship Saturday. Thank you!

    Sent from my SM-N950U using Tapatalk
    Oops sorry I meant Monday.

    Sent from my SM-N950U using Tapatalk
    Ride 1: 2003 300-A MM, black (naturally), K&N cold air, Granitelli Racing coils, Kybe shocks, Autometer "real" oil pressure and voltmeter, 14 inch front rotors and stainless lines from TCE with 6-piston Wilwood calipers and Hawk HPS pads, cryo-treated slotted rear rotors with TCE stainless lines and Hawk HPS pads, tune by Lidio, LED headlamps. Coming Soon: LED foglights, 200 Amp Alternator.

    Ride 2: 2001 Kenny Brown "Panther 2" Crown Victoria, Black. K&N cold air intake to Allen Engine Development supercharger system with water-to-air intercooled Eaton MP-90 at 8 pounds. Extensive chassis bracing, Brembo 4-piston front calipers on 13 inch rotors with stainless lines. Trunk-relocated Optima Red-Top. 5000K Bi-Xenon HID's. And much, much more.

  15. #30
    Join Date
    Jun 2009
    Location
    Warsaw, Indiana
    Posts
    321

    Talking

    Quote Originally Posted by SteelQualityMan View Post
    Since I will be selling the car shortly, all the spare parts I hoarded must go. All parts are OBO, but please no $8.00 bids. Shipping included UPS ground or USPS to lower 48

    One speedometer cluster in good condition, showing 160,134 miles. $98.00 Buyer pays actual shipping cost

    There is a member here who can reset this mileage for you, and replace the lamps with LEDs. Make arrangements with him and I will ship i to him for modification.

    One console gauge pod with original Ford gauges. $SOLD

    One console gauge pod bracket $SOLD

    Pod and bracket together $SOLD

    Set of left and right visors with the extra "flap". Lighting connection for mirrors is intact. $SOLD

    BUMP for price cuts. It is impossible to compete on price with someone who is parting out a wreck. I can only compete on customer service
    Ride 1: 2003 300-A MM, black (naturally), K&N cold air, Granitelli Racing coils, Kybe shocks, Autometer "real" oil pressure and voltmeter, 14 inch front rotors and stainless lines from TCE with 6-piston Wilwood calipers and Hawk HPS pads, cryo-treated slotted rear rotors with TCE stainless lines and Hawk HPS pads, tune by Lidio, LED headlamps. Coming Soon: LED foglights, 200 Amp Alternator.

    Ride 2: 2001 Kenny Brown "Panther 2" Crown Victoria, Black. K&N cold air intake to Allen Engine Development supercharger system with water-to-air intercooled Eaton MP-90 at 8 pounds. Extensive chassis bracing, Brembo 4-piston front calipers on 13 inch rotors with stainless lines. Trunk-relocated Optima Red-Top. 5000K Bi-Xenon HID's. And much, much more.

Page 2 of 3 FirstFirst 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. For Sale Instrument Cluster/Speedometer
    By jus2rel in forum Marauder-specific Parts for Sale
    Replies: 9
    Last Post: 08-27-2013, 05:02 AM
  2. For Sale Sale Instrument Cluster/Speedometer
    By merc in forum Marauder-specific Parts for Sale
    Replies: 0
    Last Post: 07-08-2013, 03:04 PM
  3. For Sale Mm speedometer cluster
    By NXSBOB in forum Marauder-specific Parts for Sale
    Replies: 2
    Last Post: 02-24-2012, 07:47 PM
  4. mm instrument cluster
    By k9cinco in forum Other Parts/Misc. Wanted
    Replies: 2
    Last Post: 11-11-2008, 08:34 PM
  5. Instrument Gauge Cluster and Speedometer
    By blackf0rk in forum Shop Talk
    Replies: 4
    Last Post: 01-30-2006, 12:28 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •