Replaced the factory radio with the replacement talked about here. Seems like it is slightly larger? Will not push all the way in to lock inplace like the original did. Anyone else have this issue?
Joe
Replaced the factory radio with the replacement talked about here. Seems like it is slightly larger? Will not push all the way in to lock inplace like the original did. Anyone else have this issue?
Joe
did you take the white plastic piece off the back?
2004 SB Ported Trilogy 48
Has supporting mods and stuff
Thanks to Marty O for his help in updating this car.
R.I.P.
Rex "SC Cheesehead"
Yes, took the white plastic piece off.
escape audiophile radio right? it was like 5+ years ago when I did mine inmy first marauder. one side was tougher to "click" make sure everything behind it is tucked away. got give it a firm push as best as I remember
2004 SB Ported Trilogy 48
Has supporting mods and stuff
Thanks to Marty O for his help in updating this car.
R.I.P.
Rex "SC Cheesehead"
The wire harnesses are what you are fighting. Make sure the one harness is clipped into place,... that probably the one that's too short anyway
Try and move them around and push
The twins2.3 whipple/aluminatorVortech V-2 lots of goodies
Current marauders
04 DTR totaled JUST NOW starting to part out 7-21-2021 https://youtu.be/REUxjP1BVpg
04 Silver Birch Dark Charcoal Hardtop Whipple Supercharger
04 Silver Birch Dark Charcoal Hardtop V2 Supercharger
04 Silver Birch Dark Charcoal Converted
03 DBP Light Flint #122
03 DBP Dark Charcoal #232
03 Silver Birch 300b Light Flint Going to fix er up
03 Black 300a
04 Silver Birch Dark Charcoal moonroof in the works
04 Heaton Swapped DTR
Joe's Wrecked DTR rebuild thread
2004 Mercury Marauder DTR:
#320 of 982 & #1036 of 3213
NOVI 1200-SL *Supercharged*
492.6 HP / 430.0 ft-lbs - 09/25/08
-Full Stainless Exhaust by Exotic (!!!LOUD!!!)
-Flowmaster Super 44s & 4" Delete Tips - Wes
-Richmond 4.10's
-Ford Racing M-4033-G1 Aluminum Axle Girdle
-Tuned by ZACK
-Pro-Guard
-KDW2 Tires
1998 P-71 POLICE INTERCEPTOR "Embassy Edition"
1985 Mustang GT 5.0 HO 4bb (my first car)
1982 Ford Clubwagon XLT 5.0 - "Ol' Blue 82"
1973 Ford Bronco - w/ a Fuel Injected 5.0
--------------------------------------------------
60' ... 1.927
1/8 ... 7.932
MPH ... 92.08
1/4 ... 12.231
MPH ... 116.29
It might help if you remove the EATC and reach up and behind to guide the wires / connectors.
“When you can’t make them see the light, make them feel the heat.”
Ronald Regan
"The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."
Lt. Colonel Ralph Peters
“Be polite, be professional, but have a plan to kill everybody you meet.”
"I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
General James Mattis
“When you can’t make them see the light, make them feel the heat.”
Ronald Regan
"The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."
Lt. Colonel Ralph Peters
“Be polite, be professional, but have a plan to kill everybody you meet.”
"I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
General James Mattis
Have not had a chance to try it yet. Was working on wet sanding and buffing to remove a few scratches on the hood when we had some nicer weather.(Which by the way came out great).
Now just need more nice weather so the garage is warm. Hate working on the car when it is cold out.
Joe![]()
There are currently 1 users browsing this thread. (0 members and 1 guests)