Hole does not line up, but they fit great.
Make a new hole or use as is.
Nubs on backside hold mats fairly well.
https://www.ebay.com/itm/1995-1996-1...frcectupt=true
Hole does not line up, but they fit great.
Make a new hole or use as is.
Nubs on backside hold mats fairly well.
https://www.ebay.com/itm/1995-1996-1...frcectupt=true
Last edited by NXSBOB; 01-18-2019 at 01:08 PM.
I mentioned this before. https://www.mercurymarauder.net/foru...t=81214&page=4
I went with driling a hole. I attached a photo.
2003 Mercury Marauder 300B (Daily Driver)
1988 LTD Crown Victoria S
2003 300A Black, #4918 of 7838, 17,400 Miles
Tune, KYB's, JLT, FlowMaster 42441, Res Delete, New BFG's, 8 coats of zymoil Titanium
2003 300B Silver Birch, #21 of 419, 29,800 miles
Tune, JLT, FlowMaster 42441 Res Delete, New Nitto 235/255 Bigcarsforever dead peddle & custom SRP peddles, 5 coats Zymoil Titanium, Addco front and rear sway bars, KYBs, 1/2 inch coil cut, Sparta Watts link and Control Arms, Carfixer alignment.
2003 CV Sport Matador Red, 19,280 Miles, DD, Curless Full Service Royal flush, Marto Tune, 18 Chrome Wheels w 235/265 front/back Nitto tires, NEW OEM Sport Springs -1 coil & Monroe Severe Duty (front) shocks, Addco front and rear sway bars, KYB rear Shocks, Carfixer Alignment.
2004 CV HPP Silver Birch, 93,000 miles. Son's DD, 18 Chrome Wheels w 235/265 front/back Nitto tires (thank you Lowndex!)
There are currently 1 users browsing this thread. (0 members and 1 guests)