Page 1 of 2 12 LastLast
Results 1 to 15 of 26

Thread: Floor Mats?

  1. #1
    Join Date
    Jan 2003
    Location
    Near Knoxville TN
    Age
    67
    Posts
    10,720

    Floor Mats?

    I'd sure like to find a set of "decent" front mats. My newest addition has a brand new set, the original owner took them out and put them in the trunk. I just can't bear to put them in the floor and step all over them. But those rubber things he put in it are just plain ugly.
    Thanks to Darrin @ BC Automotive:
    $1800 and it was worse than when he started!

    Brian (FordNut) FPG # 1458 of 7838
    03 MM 300A (Lotsa mods, 130k mi) was 303rwhp/318rwtq N/A
    then 476/410 D1SC ProCharged on stock block
    then 660/555 D1SC PC on 5.3 wet sleeved Teksid alum big bore stroker
    then 365/369 N/A on 5.3 wet sleeved Teksid alum big bore stroker
    Now 751/617 3.4L Whipple on 5.3 Boss5.0 iron big bore stroker

    03 MM 300B Silver (Mostly stock, originally wife's car, 370k mi) FPG # 7053 of 7838 or 49 of 417 SB
    03 MM 300B Silver, Stock, wife's next one, 136k mi FPG # 7134 of 7838 or 89 of 417 SB
    04 MM Silver, Stock, on standby 85k mi, FPG # 1212 of 3214 or 432 of 997 SB
    01 F150 longbed
    01 F150 shortbed
    00 F150 4x4 stepside
    01 F150 4x4 7700
    68 Stang FB (70 351C 4V, 4 wheel discs, project car)

    Mods listed here (some items not current): FordNut's Mods

  2. #2
    Join Date
    Jan 2004
    Location
    Somewhere in the N.C. Triangle
    Age
    68
    Posts
    26,250
    Quote Originally Posted by FordNut View Post
    I'd sure like to find a set of "decent" front mats. My newest addition has a brand new set, the original owner took them out and put them in the trunk. I just can't bear to put them in the floor and step all over them. But those rubber things he put in it are just plain ugly.
    Walmart, Target or any FLAPS. I spend about $20.00 on a decent set instead of using the factory ones.
    “When you can’t make them see the light, make them feel the heat.”
    Ronald Regan

    "The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
    is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."

    Lt. Colonel Ralph Peters

    “Be polite, be professional, but have a plan to kill everybody you meet.”
    "I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
    General James Mattis




  3. #3
    Join Date
    Dec 2015
    Location
    Remington, IN
    Age
    60
    Posts
    730
    My car came without any mats. Going to have to make an Auto-Zone or Wal-Mart trip soon.
    2003 Marauder... the gentleman's hot rod.

    You know what I like best about most people? Their dogs.


  4. #4
    Join Date
    Nov 2014
    Location
    KC
    Age
    48
    Posts
    3,520
    I can only assume your looking for a set of used marauder floor mats?
    The twins2.3 whipple/aluminatorVortech V-2 lots of goodies

    Current marauders
    04 DTR totaled JUST NOW starting to part out 7-21-2021 https://youtu.be/REUxjP1BVpg

    04 Silver Birch Dark Charcoal Hardtop Whipple Supercharger
    04 Silver Birch Dark Charcoal Hardtop V2 Supercharger
    04 Silver Birch Dark Charcoal Converted
    03 DBP Light Flint #122
    03 DBP Dark Charcoal #232
    03 Silver Birch 300b Light Flint Going to fix er up
    03 Black 300a
    04 Silver Birch Dark Charcoal moonroof in the works

    04 Heaton Swapped DTR
    Joe's Wrecked DTR rebuild thread

  5. #5
    Join Date
    Jan 2003
    Location
    Near Knoxville TN
    Age
    67
    Posts
    10,720
    Quote Originally Posted by Turbov6Bryan View Post
    I can only assume your looking for a set of used marauder floor mats?
    That's correct.
    Thanks to Darrin @ BC Automotive:
    $1800 and it was worse than when he started!

    Brian (FordNut) FPG # 1458 of 7838
    03 MM 300A (Lotsa mods, 130k mi) was 303rwhp/318rwtq N/A
    then 476/410 D1SC ProCharged on stock block
    then 660/555 D1SC PC on 5.3 wet sleeved Teksid alum big bore stroker
    then 365/369 N/A on 5.3 wet sleeved Teksid alum big bore stroker
    Now 751/617 3.4L Whipple on 5.3 Boss5.0 iron big bore stroker

    03 MM 300B Silver (Mostly stock, originally wife's car, 370k mi) FPG # 7053 of 7838 or 49 of 417 SB
    03 MM 300B Silver, Stock, wife's next one, 136k mi FPG # 7134 of 7838 or 89 of 417 SB
    04 MM Silver, Stock, on standby 85k mi, FPG # 1212 of 3214 or 432 of 997 SB
    01 F150 longbed
    01 F150 shortbed
    00 F150 4x4 stepside
    01 F150 4x4 7700
    68 Stang FB (70 351C 4V, 4 wheel discs, project car)

    Mods listed here (some items not current): FordNut's Mods

  6. #6
    Join Date
    May 2009
    Location
    Moreau Island
    Posts
    12,209
    Get a set from Lloyds or one of the other mat makers. www.Autoanything.com

  7. #7
    Join Date
    Aug 2007
    Location
    las vegas
    Age
    64
    Posts
    1,104
    I have a mint factory set, not sure if you want to know the "I don't want to sell them price".

  8. #8
    Join Date
    Jan 2003
    Location
    Near Knoxville TN
    Age
    67
    Posts
    10,720
    Quote Originally Posted by 03blackvegas View Post
    I have a mint factory set, not sure if you want to know the "I don't want to sell them price".
    you're right about that... Although it could give me a reference point on the value of what came with my car. In a way, they're too nice to actually use. But that's what they're for, right?
    Thanks to Darrin @ BC Automotive:
    $1800 and it was worse than when he started!

    Brian (FordNut) FPG # 1458 of 7838
    03 MM 300A (Lotsa mods, 130k mi) was 303rwhp/318rwtq N/A
    then 476/410 D1SC ProCharged on stock block
    then 660/555 D1SC PC on 5.3 wet sleeved Teksid alum big bore stroker
    then 365/369 N/A on 5.3 wet sleeved Teksid alum big bore stroker
    Now 751/617 3.4L Whipple on 5.3 Boss5.0 iron big bore stroker

    03 MM 300B Silver (Mostly stock, originally wife's car, 370k mi) FPG # 7053 of 7838 or 49 of 417 SB
    03 MM 300B Silver, Stock, wife's next one, 136k mi FPG # 7134 of 7838 or 89 of 417 SB
    04 MM Silver, Stock, on standby 85k mi, FPG # 1212 of 3214 or 432 of 997 SB
    01 F150 longbed
    01 F150 shortbed
    00 F150 4x4 stepside
    01 F150 4x4 7700
    68 Stang FB (70 351C 4V, 4 wheel discs, project car)

    Mods listed here (some items not current): FordNut's Mods

  9. #9
    Join Date
    Jul 2011
    Location
    Kentucky
    Age
    59
    Posts
    480
    Anyone make Carpeted Direct fit mats


    2003 Marauder 300B 148K 1 of 364 Heated Seats
    2003 Mach 1 5spd Torch red 29K

  10. #10
    Join Date
    Oct 2005
    Location
    Southwest Florida, Lee County
    Age
    54
    Posts
    3,423
    I use charcoal grey bath mats. They're soft and rubber backed so they don't slide PLUS they're machine washable and disposable. The floorpan is huge enough and they sort of disappear.
    '04 Silver Marauder w/ sunroof - HID lighting, JL Audio / Eclipse DVD/NAV/iPod/camera, 4.10's, 2" drop, Progard Bumper Baffle, Delete tips, Billet Pedals, BC4E dead pedal, Lidio Tune, Mach1 chin spoiler, K&N CAI, TCE lines, Super40's, tinted tails, SS Inserts, Heinous Control Arms, Real oil gauge, lighted door handles. Currently installing Eaton M112.

    2004 Mercury Marauder
    Born March 2004, adopted October 2005. Sold January 2012, adopted AGAIN January 2016
    2,187 of 3,214
    997 in Silver Birch
    448 with light flint interior
    304 with heated seats
    336 with sunroof

  11. #11
    Join Date
    Oct 2011
    Location
    Westport, Ma
    Age
    39
    Posts
    3,913
    I use whether tech in both my crown Vic and marauder -AutoZone has them 50-70 if I recall
    2003 MM 300A
    #738 of 7,838 BLK
    Build date: 6/6/2002
    Adopted: 2/05/2013

    MODS:

    Metco control arms, Addco sway bars, TCE brake lines, Gatorback belt, remote start, underbody lights, custom doorsills. Black with custom silver hood stripes (S-55 theme)

    2004 CV LX SPORT
    ALL BLACK, 6 DISC, TUNED MZT
    Adopted on12/09/18 from chief455




    COMING SOON-Trilogy #005 THANKS CWright-
    I am afraid you have awakened a sleeping Giant


    http://www.mercurymarauder.net/forum...=view&id=14156

    Quote Originally Posted by MOTOWN MARAUDER View Post
    Im happy for you bro! Let the mods begin! I hear the mod bug broke his stinger when he heard you pulled the trigger!

    BIG BIG thanks to the GOD of marauder parts ( Darren) I am the 1st winner of Darren bag of fun give-away

  12. #12
    Join Date
    Feb 2012
    Location
    harrison twp,mi
    Posts
    8,701
    I believe I have a used set of fronts upstairs in the garage.

    Shoot me an email and I'll get some pics for you..
    Those were the days.........

    DANG THEY'RE CUTE!!!!!!
    Smile and Nod
    I love THIS bar

  13. #13
    Join Date
    Nov 2012
    Location
    Sacramento
    Posts
    3,739
    Jerry for the WIN!

    And then get a set of matts to cover these matts!

    Not kidding.


    2003 300A Black, #4918 of 7838, 17,400 Miles
    Tune, KYB's, JLT, FlowMaster 42441, Res Delete, New BFG's, 8 coats of zymoil Titanium

    2003 300B Silver Birch, #21 of 419, 29,800 miles
    Tune, JLT, FlowMaster 42441 Res Delete, New Nitto 235/255 Bigcarsforever dead peddle & custom SRP peddles, 5 coats Zymoil Titanium, Addco front and rear sway bars, KYBs, 1/2 inch coil cut, Sparta Watts link and Control Arms, Carfixer alignment.

    2003 CV Sport Matador Red, 19,280 Miles, DD, Curless Full Service Royal flush, Marto Tune, 18 Chrome Wheels w 235/265 front/back Nitto tires, NEW OEM Sport Springs -1 coil & Monroe Severe Duty (front) shocks, Addco front and rear sway bars, KYB rear Shocks, Carfixer Alignment.

    2004 CV HPP Silver Birch, 93,000 miles. Son's DD, 18 Chrome Wheels w 235/265 front/back Nitto tires (thank you Lowndex!)

  14. #14
    Join Date
    Feb 2012
    Location
    harrison twp,mi
    Posts
    8,701
    oops i forgot to look

    i will when i get home, yes that means i'm at the shop making stuffs...
    Those were the days.........

    DANG THEY'RE CUTE!!!!!!
    Smile and Nod
    I love THIS bar

  15. #15
    Join Date
    Jan 2003
    Location
    Near Knoxville TN
    Age
    67
    Posts
    10,720
    Quote Originally Posted by lji372 View Post
    I believe I have a used set of fronts upstairs in the garage.

    Shoot me an email and I'll get some pics for you..
    I did the other day. Did you get the msg?
    Thanks to Darrin @ BC Automotive:
    $1800 and it was worse than when he started!

    Brian (FordNut) FPG # 1458 of 7838
    03 MM 300A (Lotsa mods, 130k mi) was 303rwhp/318rwtq N/A
    then 476/410 D1SC ProCharged on stock block
    then 660/555 D1SC PC on 5.3 wet sleeved Teksid alum big bore stroker
    then 365/369 N/A on 5.3 wet sleeved Teksid alum big bore stroker
    Now 751/617 3.4L Whipple on 5.3 Boss5.0 iron big bore stroker

    03 MM 300B Silver (Mostly stock, originally wife's car, 370k mi) FPG # 7053 of 7838 or 49 of 417 SB
    03 MM 300B Silver, Stock, wife's next one, 136k mi FPG # 7134 of 7838 or 89 of 417 SB
    04 MM Silver, Stock, on standby 85k mi, FPG # 1212 of 3214 or 432 of 997 SB
    01 F150 longbed
    01 F150 shortbed
    00 F150 4x4 stepside
    01 F150 4x4 7700
    68 Stang FB (70 351C 4V, 4 wheel discs, project car)

    Mods listed here (some items not current): FordNut's Mods

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. stock floor mats factory mats
    By 68MercuryM250 in forum Community Discussion
    Replies: 7
    Last Post: 03-12-2013, 05:07 AM
  2. For Sale NIB OEM Floor mats
    By MMM2003 in forum Marauder-specific Parts for Sale
    Replies: 4
    Last Post: 12-16-2010, 06:25 PM
  3. OEM Floor Mats
    By W4LTD in forum Marauder Parts/Misc. Wanted
    Replies: 13
    Last Post: 06-06-2009, 01:51 PM
  4. WTB: OEM Floor Mats
    By Phrog_gunner in forum Marauder Parts/Misc. Wanted
    Replies: 11
    Last Post: 05-28-2009, 06:59 PM
  5. WTB OEM floor mats
    By joemama in forum Marauder Parts/Misc. Wanted
    Replies: 2
    Last Post: 04-05-2009, 08:07 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •