hi I'm new marauder owner have a ? already when I step on the brake and let up on it I get a clunking in the rear any idea what it coud be
hi I'm new marauder owner have a ? already when I step on the brake and let up on it I get a clunking in the rear any idea what it coud be
It could definitely be the ? because all the ? do it. ? will repair it for ?.
'04 Silver Marauder w/ sunroof - HID lighting, JL Audio / Eclipse DVD/NAV/iPod/camera, 4.10's, 2" drop, Progard Bumper Baffle, Delete tips, Billet Pedals, BC4E dead pedal, Lidio Tune, Mach1 chin spoiler, K&N CAI, TCE lines, Super40's, tinted tails, SS Inserts, Heinous Control Arms, Real oil gauge, lighted door handles. Currently installing Eaton M112.
2004 Mercury Marauder
Born March 2004, adopted October 2005. Sold January 2012, adopted AGAIN January 2016
2,187 of 3,214
997 in Silver Birch
448 with light flint interior
304 with heated seats
336 with sunroof
so that's normal
no it's not normal
300A Black
4:10 gears, Flowmaster 44's with rear cat delete, SW headers with 3 inch cats to 2.5 custom h. 3500 stall, Twisted synergy dyno tune, addco f/r , rear control arms, Novi 1200 air to air with the fixings.
so what u think it is
Anything suspension related, rear end, you will have to investigate a little better to find out.
300A Black
4:10 gears, Flowmaster 44's with rear cat delete, SW headers with 3 inch cats to 2.5 custom h. 3500 stall, Twisted synergy dyno tune, addco f/r , rear control arms, Novi 1200 air to air with the fixings.
ok have to get up on the rack sounds like maybe loose air bag have u heard of that
Control arm bushings, pinion, u joint, rear sway bar bushing or end link
2004 SB Ported Trilogy 48
Has supporting mods and stuff
Thanks to Marty O for his help in updating this car.
R.I.P.
Rex "SC Cheesehead"
ok thanks ill check it out
Wait I have that sound too... I believe it's play in the rear axle. Every time the rear brakes engage it stiffens and shifts the angle of the axle to the rear, when you let off the brakes, naturally it goes back to the original position. I will investigate as well. Just haven't gotten around to do it.
ok cool at least I'm not crazy got it up in the air today and every thing was tight
Control arm bushings may be worn out. Make sure the control arm bolts are balls to the wall tight....I think like over 100 ft lbs
no regerts
“When you can’t make them see the light, make them feel the heat.”
Ronald Regan
"The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."
Lt. Colonel Ralph Peters
“Be polite, be professional, but have a plan to kill everybody you meet.”
"I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
General James Mattis
I was talking the air bag mounts loose I know air bags are rubber I'm going to take the wheels of and check the mounts had car up and found no loose parts and when u go over bigger bumps it make the same noise...... is there a way to change how much air goes in the bag?
Air bag mounts do not come loose.they are part if the airbag assembly . You need to raise car with no weight on rear suspension. To check for loose or worn bushings. Make sure you turn air ride switch off in trunk when raising car with nothing supporting the rear axle
2004 SB Ported Trilogy 48
Has supporting mods and stuff
Thanks to Marty O for his help in updating this car.
R.I.P.
Rex "SC Cheesehead"
There are currently 1 users browsing this thread. (0 members and 1 guests)