Page 2 of 5 FirstFirst 12345 LastLast
Results 16 to 30 of 64

Thread: Big Brake Brackets (zack kit)

  1. #16
    Join Date
    Feb 2012
    Location
    harrison twp,mi
    Posts
    8,700
    Quote Originally Posted by Spectragod View Post
    Would these be an upgrade for me Jerry?
    No since you don't drive your car.

    Not to mention it's a dtr and you don't really need brakes for those....
    Those were the days.........

    DANG THEY'RE CUTE!!!!!!
    Smile and Nod
    I love THIS bar

  2. #17
    Join Date
    Feb 2007
    Location
    over here, with the 40's of beer.
    Age
    21
    Posts
    9,026
    Quote Originally Posted by lji372 View Post
    No since you don't drive your car.



    Not to mention it's a dtr and you don't really need brakes for those....


    Both very valid points, that's why I'm converting it to a crown Vic, plus I can sell the marauder parts and get some money back....


    Sent from my iPhone while doing a big ole' smokey burnout in my wife's Prius.
    I LOVE Jerry's bar, it's my kinda place...........






    When you are dead, you don’t know you are dead. It is difficult only for others. It is the same way when you are stupid.

    "Chuck Norris built my stock longblock. It runs on the tears of small children and makes 10,000 hp. He said it's his 'street version' "


    Trilogy # 192 / T.S. 0012

    BOOST GETS YOU FELONY STOPPED!!!





  3. #18
    Join Date
    Mar 2008
    Location
    Next door to my neighbor
    Age
    50
    Posts
    20,353
    Quote Originally Posted by Spectragod View Post
    Both very valid points, that's why I'm converting it to a crown Vic, plus I can sell the marauder parts and get some money back....


    Sent from my iPhone while doing a big ole' smokey burnout in my wife's Prius.


    This will probably tread very thin water on the Vic forums.. They are a tight knit group and parts are scarce.


    Sent from my iThrone using Tapatalk
    SOLD 12/31/2021

    Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.

  4. #19
    Join Date
    Apr 2006
    Location
    Smyrna, DE
    Age
    72
    Posts
    1,785
    I am interested, also in your "Marauder" calipers and related parts.
    2004 MM (Black) #112 of 3213 (SOLD)

    2022 Ford Ff-150 SuperCab Iconic Silver "Powerboost"
    3.35 L 4X4
    -AND-
    SLAYER1
    formerly owned by "Impala Slayer!! 2004 SB MM
    Kenne Belle 2.8 (Liquid Cooled), MMR "Boss 302" Block, L&M Engines rebuild Kooks Headers and cats, Accusump Pre-Oiler Dynamax VT mufflers, MBS 2 1/2" exhaust, 4.10's, 2800 stall, Argento 312 "Color" Powder coated wheels, Rears widened 1 1/2 "703
    702 RWHP/653 RWTQ @ 21 Lbs. Boost, M/M catch can, 3 pillar gauge (Boost, Fuel, air intake and coolant temp, custom console cover, S-55 treatment etc...

  5. #20
    Join Date
    Oct 2008
    Location
    Windsor
    Age
    38
    Posts
    219
    can i be linked to a thread about how all this works? is it not possible to do a 03/04 svt cobra swap. i have never really looked at the front spindles to know what they look like.

  6. #21
    Join Date
    Nov 2014
    Location
    KC
    Age
    48
    Posts
    3,511
    Quote Originally Posted by Badass_forever View Post
    can i be linked to a thread about how all this works? is it not possible to do a 03/04 svt cobra swap. i have never really looked at the front spindles to know what they look like.
    It is in the brake section

    http://www.mercurymarauder.net/forum...ad.php?t=94024
    The twins2.3 whipple/aluminatorVortech V-2 lots of goodies

    Current marauders
    04 DTR totaled JUST NOW starting to part out 7-21-2021 https://youtu.be/REUxjP1BVpg

    04 Silver Birch Dark Charcoal Hardtop Whipple Supercharger
    04 Silver Birch Dark Charcoal Hardtop V2 Supercharger
    04 Silver Birch Dark Charcoal Converted
    03 DBP Light Flint #122
    03 DBP Dark Charcoal #232
    03 Silver Birch 300b Light Flint Going to fix er up
    03 Black 300a
    04 Silver Birch Dark Charcoal moonroof in the works

    04 Heaton Swapped DTR
    Joe's Wrecked DTR rebuild thread

  7. #22
    Join Date
    Oct 2005
    Location
    West 'burbs Chicago
    Age
    36
    Posts
    3,823
    Quote Originally Posted by lji372 View Post
    any interested parties?

    i am currently out of stock and may do one more run if there is enough interest.
    So where are we at on this bro-bro lips?

    I already have the TCE lines on hand. Any dates or plans setup yet?
    -----------------------------------------------------------------------------------

    '04 Marauder #357 of 3213 - Built and Eaton swapped - "MERCD"
    '21 F150 XLT 5.0 Sport
    '18 Chevy Malibu Redline
    '15 Mustang GT, performance package
    '01 BMW 740i M-Sport, manual swapped
    '97 Lincoln Town Car (black on black)
    '10 Harley Ultra Limited
    '08 Kawasaki ZX6R
    '03 Grand Marquis(sold)

  8. #23
    Join Date
    Aug 2016
    Location
    Pikeville, Kentucky
    Age
    31
    Posts
    61
    I'm interested too. In about 2 weeks or 3, I'll be getting the TCE lines and the calipers and rotors from probably advanced auto, if my local will take my Marauder as core, although I may wanna kept them. Just need brackets and hardware from there I guess. I'll keep checking back.
    Thanks

  9. #24
    Join Date
    Feb 2012
    Location
    harrison twp,mi
    Posts
    8,700
    Brackets are running now.

    Should be ready to ship by the end of this week.
    Those were the days.........

    DANG THEY'RE CUTE!!!!!!
    Smile and Nod
    I love THIS bar

  10. #25
    Join Date
    Oct 2014
    Location
    Cunningham, Kansas
    Age
    70
    Posts
    695
    I have a full set of 2008 Corvette Z06 brakes sitting in the garage. The Z06 brake calipers are much larger than the stock C6 brakes. I wonder if your brackets would work on them provided I changed the rotors and the wheels? Anybody know? Anybody need a set of Z06 brakes with 1700 miles on them?

    Thanks

    Bob
    2004 SB #2150 of 3214 Moonroof, Heated Seats and 6 CD Changer. Non OEM Mufflers and 32,XXX miles and counting.

  11. #26
    Join Date
    Aug 2016
    Location
    Fillmore, CA.
    Posts
    102
    Quote Originally Posted by justbob View Post
    This will probably tread very thin water on the Vic forums.. They are a tight knit group and parts are scarce.


    Sent from my iThrone using Tapatalk
    The brake kit will only work for the 2003+ panthers so that limits the market a little over there. And it's not that parts are scarce, it's that Money is scarce. I have took part in some major group buys on CVN. It's same thing every time, 40+ members sign up but when time comes to lay the money down, it's the same 10-15 members every time and no one else is to be found. we had a lot of interest when we got Addco to make custom sway bars for our cars. In the end only 11 of us paid the money.
    2003 Mercury Marauder- Stock with 223k miles.

    2000 Crown Victoria P73. Deep Wedge Wood Blue.
    SW longtube headers and high flow cats, magnaflow mufflers, 3.55 gears w/track lock, 70mm Aviator TB, PnP factory plenum, ADTR intake tube, 87 octaine tune by MO. Bilstein HD shocks, Mecto Rear control arms w/ watts link, Addco custom order 1.5 inch front sway bar (38mm), 1.25 inch rear bar 31.75mm (only 11 made).

  12. #27
    Join Date
    Feb 2012
    Location
    harrison twp,mi
    Posts
    8,700
    Quote Originally Posted by justbob View Post
    This will probably tread very thin water on the Vic forums.. They are a tight knit group and parts are scarce.


    Sent from my iThrone using Tapatalk



    bwhahahahaha
    Those were the days.........

    DANG THEY'RE CUTE!!!!!!
    Smile and Nod
    I love THIS bar

  13. #28
    Join Date
    Mar 2008
    Location
    Next door to my neighbor
    Age
    50
    Posts
    20,353
    Quote Originally Posted by lji372 View Post






    bwhahahahaha


    At least someone gets it! Jeesh!


    Sent from my iThrone using Tapatalk
    SOLD 12/31/2021

    Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.

  14. #29
    Join Date
    Nov 2014
    Location
    KC
    Age
    48
    Posts
    3,511
    Quote Originally Posted by Fastbob View Post
    I have a full set of 2008 Corvette Z06 brakes sitting in the garage. The Z06 brake calipers are much larger than the stock C6 brakes. I wonder if your brackets would work on them provided I changed the rotors and the wheels? Anybody know? Anybody need a set of Z06 brakes with 1700 miles on them?

    Thanks

    Bob
    Well, I have the jerry brackets, hoses and need to buy semi loaded caliper kits and rotors and pads
    Ship me the calipers and I'll see if they fit the vette caliper brackets,AND clear the wheels

    If they clear the stock wheels, how much you want for them?

    I live in Kansas City so shipping should not be expensive

    Let me know
    The twins2.3 whipple/aluminatorVortech V-2 lots of goodies

    Current marauders
    04 DTR totaled JUST NOW starting to part out 7-21-2021 https://youtu.be/REUxjP1BVpg

    04 Silver Birch Dark Charcoal Hardtop Whipple Supercharger
    04 Silver Birch Dark Charcoal Hardtop V2 Supercharger
    04 Silver Birch Dark Charcoal Converted
    03 DBP Light Flint #122
    03 DBP Dark Charcoal #232
    03 Silver Birch 300b Light Flint Going to fix er up
    03 Black 300a
    04 Silver Birch Dark Charcoal moonroof in the works

    04 Heaton Swapped DTR
    Joe's Wrecked DTR rebuild thread

  15. #30
    Join Date
    Nov 2014
    Location
    KC
    Age
    48
    Posts
    3,511
    Quote Originally Posted by Fastbob View Post
    I have a full set of 2008 Corvette Z06 brakes sitting in the garage. The Z06 brake calipers are much larger than the stock C6 brakes. I wonder if your brackets would work on them provided I changed the rotors and the wheels? Anybody know? Anybody need a set of Z06 brakes with 1700 miles on them?

    Thanks

    Bob
    Yes if you bought 20 inch wheels they would clear!! That's the whole issue, buying the correct caliper and having it clear the wheel

    The twins2.3 whipple/aluminatorVortech V-2 lots of goodies

    Current marauders
    04 DTR totaled JUST NOW starting to part out 7-21-2021 https://youtu.be/REUxjP1BVpg

    04 Silver Birch Dark Charcoal Hardtop Whipple Supercharger
    04 Silver Birch Dark Charcoal Hardtop V2 Supercharger
    04 Silver Birch Dark Charcoal Converted
    03 DBP Light Flint #122
    03 DBP Dark Charcoal #232
    03 Silver Birch 300b Light Flint Going to fix er up
    03 Black 300a
    04 Silver Birch Dark Charcoal moonroof in the works

    04 Heaton Swapped DTR
    Joe's Wrecked DTR rebuild thread

Page 2 of 5 FirstFirst 12345 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Zacks big brake brackets next round
    By lji372 in forum Steering, Suspension & Brakes
    Replies: 57
    Last Post: 12-30-2015, 11:39 AM
  2. For Sale OEM brake calipers/brackets/pads
    By Jon01 in forum Marauder-specific Parts for Sale
    Replies: 2
    Last Post: 04-13-2012, 08:13 PM
  3. Ask Zack: best brake pads with Baer brake kit?
    By Haggis in forum Steering, Suspension & Brakes
    Replies: 27
    Last Post: 06-25-2010, 03:44 AM
  4. Wanted To Buy or borrow a Full set OEM Brake Calipers and brackets
    By cougar9150 in forum Marauder Parts/Misc. Wanted
    Replies: 2
    Last Post: 05-11-2010, 06:17 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •