Page 1 of 2 12 LastLast
Results 1 to 15 of 21

Thread: program keyless remote please help

  1. #1
    Join Date
    Jun 2013
    Location
    fl
    Posts
    6

    program keyless remote please help

    ive been trying to program a key fob but the mm wont go into program mode does anyone have the right way to program this 03 mm or no were i can get a door module for driver door maybe thats whats bad as well tks

  2. #2
    Join Date
    Oct 2005
    Location
    Southwest Florida, Lee County
    Age
    54
    Posts
    3,423
    Doors closed, key/on/off/on/off/etc... ending in OFF I believe 8 times. Doors will lock/unlock to initiate programming. Press LOCK on each remote being programmed. Done.
    '04 Silver Marauder w/ sunroof - HID lighting, JL Audio / Eclipse DVD/NAV/iPod/camera, 4.10's, 2" drop, Progard Bumper Baffle, Delete tips, Billet Pedals, BC4E dead pedal, Lidio Tune, Mach1 chin spoiler, K&N CAI, TCE lines, Super40's, tinted tails, SS Inserts, Heinous Control Arms, Real oil gauge, lighted door handles. Currently installing Eaton M112.

    2004 Mercury Marauder
    Born March 2004, adopted October 2005. Sold January 2012, adopted AGAIN January 2016
    2,187 of 3,214
    997 in Silver Birch
    448 with light flint interior
    304 with heated seats
    336 with sunroof

  3. #3
    Join Date
    Jun 2013
    Location
    fl
    Posts
    6
    well i tried that and nothing the mm wont go into program mode the locks wont cycle

  4. #4
    Join Date
    Oct 2005
    Location
    Southwest Florida, Lee County
    Age
    54
    Posts
    3,423
    Hmmmm........
    '04 Silver Marauder w/ sunroof - HID lighting, JL Audio / Eclipse DVD/NAV/iPod/camera, 4.10's, 2" drop, Progard Bumper Baffle, Delete tips, Billet Pedals, BC4E dead pedal, Lidio Tune, Mach1 chin spoiler, K&N CAI, TCE lines, Super40's, tinted tails, SS Inserts, Heinous Control Arms, Real oil gauge, lighted door handles. Currently installing Eaton M112.

    2004 Mercury Marauder
    Born March 2004, adopted October 2005. Sold January 2012, adopted AGAIN January 2016
    2,187 of 3,214
    997 in Silver Birch
    448 with light flint interior
    304 with heated seats
    336 with sunroof

  5. #5
    Join Date
    Jun 2013
    Location
    fl
    Posts
    6
    yes ive pullin my hair out trying to figure out why it wont program

  6. #6
    Join Date
    Apr 2011
    Location
    tn
    Age
    39
    Posts
    169
    http://www.programyourremote.com/cla...yAd.asp?id=885
    Hope this helps the timing is crucial
    2004 90k #924 of 1237 sequence #2572 Black E3 sparkplugs accel coil packs 140034-8 trans-dapt throttle body spacer Mmr manifold spacer cold air intake superchips Steeda underdive pulleys xcal3 programmer stock other then that

  7. #7
    Join Date
    Aug 2013
    Location
    Spring, TX
    Age
    42
    Posts
    1
    Mine goes into "program mode" after 4 ON/OFF cycles as indicated by the locks cycling. However, when I push a button on the new, and even the old, remotes, nothing happens. Nothing programmed. It's broked. :-(

  8. #8
    Join Date
    Feb 2012
    Location
    harrison twp,mi
    Posts
    8,701
    you tube was my friend
    Those were the days.........

    DANG THEY'RE CUTE!!!!!!
    Smile and Nod
    I love THIS bar

  9. #9
    Join Date
    May 2005
    Location
    Las Vegas, Nevada
    Age
    69
    Posts
    278
    I'm having trouble with this too. Bought my remote on eBay, the vehicle application chart stated Marauder was compatible, but the instructions included did not mention Marauder. Since CV/GM had identical instructions, I assumed all Panthers would be the same. I've tried 3 or 4 different program instructions, but the door locks don't cycle on any. Does anyone have definitive info on this? Wht do dealers typically charge to program the remote?

  10. #10
    Join Date
    Jun 2007
    Location
    Whitehall, PA
    Age
    43
    Posts
    2,940
    Are you sure you have the right fobs? They are marauder specific.
    2003 Black - sold, back again, and sold
    2003 DBP/DC - #153 Whipple 3.4 (permanent garage art)
    2003 DBP/LF - # 36 (sold)
    2003 DBP/LF - # 205 (sold)
    2004 Black - Trilogy #43
    2003 Black - shitbox (sold)
    2004 DTR - shitbox #2

  11. #11
    Join Date
    Jun 2007
    Location
    Whitehall, PA
    Age
    43
    Posts
    2,940
    If the FCC # doesn't match this, it's not going to work.
    2003 Black - sold, back again, and sold
    2003 DBP/DC - #153 Whipple 3.4 (permanent garage art)
    2003 DBP/LF - # 36 (sold)
    2003 DBP/LF - # 205 (sold)
    2004 Black - Trilogy #43
    2003 Black - shitbox (sold)
    2004 DTR - shitbox #2

  12. #12
    Join Date
    May 2005
    Location
    Las Vegas, Nevada
    Age
    69
    Posts
    278
    Quote Originally Posted by Comin' in Hot View Post
    If the FCC # doesn't match this, it's not going to work.


    Only one of the 2 remotes that came with the car match that number, and that's the one that quit working. Guess I'll take it to the dealer and see what they say.

  13. #13
    Join Date
    May 2005
    Location
    Las Vegas, Nevada
    Age
    69
    Posts
    278
    Finally figured it out: I wasn't turning the key fast enough. Here's how it works.

    Put key in ignition.

    Turn key from off to run (not start) 4 times AS FAST AS YOU CAN. Door locks will cycle to indicate car is in program mode.

    Immediately press any button on the remote and door locks will cycle again. Up to 4 fobs can be programmed one right after the other.

    Turn key off and door locks cycle again to indicate programming is finished.

  14. #14
    Join Date
    Sep 2010
    Location
    Western WA
    Posts
    801
    Quote Originally Posted by SideshowBob View Post
    Finally figured it out: I wasn't turning the key fast enough. Here's how it works.

    Put key in ignition.

    Turn key from off to run (not start) 4 times AS FAST AS YOU CAN. Door locks will cycle to indicate car is in program mode.

    Immediately press any button on the remote and door locks will cycle again. Up to 4 fobs can be programmed one right after the other.

    Turn key off and door locks cycle again to indicate programming is finished.
    Thanks, I've had a remote sitting here for mine for some time and now that I cycled the key as fast as I could it worked just fine.

  15. #15
    Join Date
    May 2013
    Location
    Tucson, AZ
    Age
    45
    Posts
    19
    Ah crap!! My fob FCC code ends in 345
    Aaron "Scooter" Hatfield
    2003 Mercury Marauder
    Tucson, AZ

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Marauder Keyless remote
    By gmtech in forum Marauder-specific Parts for Sale
    Replies: 4
    Last Post: 03-17-2009, 08:35 AM
  2. Remote Start by Ready Remote
    By offroadkarter in forum Other Parts for Sale
    Replies: 5
    Last Post: 02-11-2009, 07:35 PM
  3. need keyless remote for 03 04 marauder
    By limostudd in forum Marauder Parts/Misc. Wanted
    Replies: 1
    Last Post: 03-10-2008, 04:57 PM
  4. Remote Keyless Entry
    By SWOOSH in forum Capital Area Marauders
    Replies: 14
    Last Post: 04-27-2007, 03:11 PM
  5. Aftermarket Remote Keyless Remote Entry
    By Donny Carlson in forum Shop Talk
    Replies: 1
    Last Post: 03-19-2005, 08:16 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •