Results 1 to 8 of 8

Thread: Manley Connecting Rods

  1. #1
    Join Date
    Mar 2004
    Location
    Baltimore, Md.
    Age
    64
    Posts
    11,665

    Manley Connecting Rods

    I'm selling the Manley connecting rods that came out of my big bore 5.0 engine.
    Less than 10,000 miles on the rods.
    Stock 5.933" Ctr-to-Ctr length
    Upgraded ARP 2000 Cap Screw Bolts
    Good to 750+ HP

    ($742.00 new from Jegs)

    $350.00 + $20 shipping anywhere in Continental US.


    I'll even throw in a full set of eight:
    3.700" custom bore pistons with thermal barrier coated crowns and anti-scuff skirt coating....for FREE!












    Last edited by Joe Walsh; 06-10-2017 at 06:50 AM.
    2020 Ford Ranger STX DFI Turbo 2.3L 10 speed Auto
    2017 Ford Fusion Sport DFI Twin Turbo 2.7L V6 6 speed Auto (14.000 ET bone stock in 82 degree heat)
    1985 Mustang GT 5.0 Hatchback 4bbl 5 speed manual (525 HP 363 Dart block/AFR heads with Magnum 6 speed in the works)
    1984 Mustang GT 2.3 Turbo Convertible FI. 5 speed manual
    1966 427 Cobra (ERA) 468 all Aluminum FE 2x4bbl 5 speed manual

    SOLD : 2003 Mercury Marauder FI. 4 speed Auto
    w/Crower Cams & Springs, +1mm SS valves, mild port job on the cylinder heads.
    Extrude honed intake w/PHP spacer.
    Kooks Headers w/2.5" High Flow Cats & X-Pipe, Magnaflow mufflers, OEM tailpipes w/Megs Tips
    B&M Trans cooler w/fan, Level 10 Shift Kit, Art Carr Hughes Deep Sump Trans Pan,
    SVO Rearend Girdle, Redline Gear lube; OEM 3.55s
    'Real Gauges' + matching Trans Temp, Oil Temp, Water Temp, Fuel Pressure, Vacuum/Boost Gauge
    Built: 10/15/02 Bought: 12/16/02 Sold: 10/15/18

  2. #2
    Join Date
    Jan 2003
    Location
    Near Knoxville TN
    Age
    67
    Posts
    10,717
    Man, is that tempting...
    Thanks to Darrin @ BC Automotive:
    $1800 and it was worse than when he started!

    Brian (FordNut) FPG # 1458 of 7838
    03 MM 300A (Lotsa mods, 130k mi) was 303rwhp/318rwtq N/A
    then 476/410 D1SC ProCharged on stock block
    then 660/555 D1SC PC on 5.3 wet sleeved Teksid alum big bore stroker
    then 365/369 N/A on 5.3 wet sleeved Teksid alum big bore stroker
    Now 751/617 3.4L Whipple on 5.3 Boss5.0 iron big bore stroker

    03 MM 300B Silver (Mostly stock, originally wife's car, 370k mi) FPG # 7053 of 7838 or 49 of 417 SB
    03 MM 300B Silver, Stock, wife's next one, 136k mi FPG # 7134 of 7838 or 89 of 417 SB
    04 MM Silver, Stock, on standby 85k mi, FPG # 1212 of 3214 or 432 of 997 SB
    01 F150 longbed
    01 F150 shortbed
    00 F150 4x4 stepside
    01 F150 4x4 7700
    68 Stang FB (70 351C 4V, 4 wheel discs, project car)

    Mods listed here (some items not current): FordNut's Mods

  3. #3
    Join Date
    Sep 2008
    Location
    USA
    Posts
    2,428
    Same price without pistons?
    Still a great price either way but I have no need for 3.700" pistons
    Thanks
    Ex Panther Owner

  4. #4
    Join Date
    Mar 2004
    Location
    Baltimore, Md.
    Age
    64
    Posts
    11,665
    Yep....$350.00 + shipping.
    The "free pistons deal" is more of a sad joke....as no one is going to want to bore out their aluminum block to 3.700" after seeing what happened to my block:

    https://www.mercurymarauder.net/foru...d.php?t=103354

    (Also don't want to mess with removing the spiralocs in order to pull out the floating pins and remove the pistons.)
    2020 Ford Ranger STX DFI Turbo 2.3L 10 speed Auto
    2017 Ford Fusion Sport DFI Twin Turbo 2.7L V6 6 speed Auto (14.000 ET bone stock in 82 degree heat)
    1985 Mustang GT 5.0 Hatchback 4bbl 5 speed manual (525 HP 363 Dart block/AFR heads with Magnum 6 speed in the works)
    1984 Mustang GT 2.3 Turbo Convertible FI. 5 speed manual
    1966 427 Cobra (ERA) 468 all Aluminum FE 2x4bbl 5 speed manual

    SOLD : 2003 Mercury Marauder FI. 4 speed Auto
    w/Crower Cams & Springs, +1mm SS valves, mild port job on the cylinder heads.
    Extrude honed intake w/PHP spacer.
    Kooks Headers w/2.5" High Flow Cats & X-Pipe, Magnaflow mufflers, OEM tailpipes w/Megs Tips
    B&M Trans cooler w/fan, Level 10 Shift Kit, Art Carr Hughes Deep Sump Trans Pan,
    SVO Rearend Girdle, Redline Gear lube; OEM 3.55s
    'Real Gauges' + matching Trans Temp, Oil Temp, Water Temp, Fuel Pressure, Vacuum/Boost Gauge
    Built: 10/15/02 Bought: 12/16/02 Sold: 10/15/18

  5. #5
    Join Date
    Jan 2003
    Location
    Near Knoxville TN
    Age
    67
    Posts
    10,717
    Yeah, but what about a boss5.0 block?
    Thanks to Darrin @ BC Automotive:
    $1800 and it was worse than when he started!

    Brian (FordNut) FPG # 1458 of 7838
    03 MM 300A (Lotsa mods, 130k mi) was 303rwhp/318rwtq N/A
    then 476/410 D1SC ProCharged on stock block
    then 660/555 D1SC PC on 5.3 wet sleeved Teksid alum big bore stroker
    then 365/369 N/A on 5.3 wet sleeved Teksid alum big bore stroker
    Now 751/617 3.4L Whipple on 5.3 Boss5.0 iron big bore stroker

    03 MM 300B Silver (Mostly stock, originally wife's car, 370k mi) FPG # 7053 of 7838 or 49 of 417 SB
    03 MM 300B Silver, Stock, wife's next one, 136k mi FPG # 7134 of 7838 or 89 of 417 SB
    04 MM Silver, Stock, on standby 85k mi, FPG # 1212 of 3214 or 432 of 997 SB
    01 F150 longbed
    01 F150 shortbed
    00 F150 4x4 stepside
    01 F150 4x4 7700
    68 Stang FB (70 351C 4V, 4 wheel discs, project car)

    Mods listed here (some items not current): FordNut's Mods

  6. #6
    Join Date
    Mar 2004
    Location
    Baltimore, Md.
    Age
    64
    Posts
    11,665
    Quote Originally Posted by FordNut View Post
    Yeah, but what about a boss 5.0 block?
    That would work!

    But...I'm done pouring money into 4.6 Mod Motors.

    You basically have to replace everything with stronger parts, then bolt on a blower and force feed it TONS of boost.

    Only money I'll spend on a Mod motor in the future is on a direct injected Coyote 5.0....

    or a flat crank 5.2 Voodoo .....
    Last edited by Joe Walsh; 06-08-2017 at 06:29 PM.
    2020 Ford Ranger STX DFI Turbo 2.3L 10 speed Auto
    2017 Ford Fusion Sport DFI Twin Turbo 2.7L V6 6 speed Auto (14.000 ET bone stock in 82 degree heat)
    1985 Mustang GT 5.0 Hatchback 4bbl 5 speed manual (525 HP 363 Dart block/AFR heads with Magnum 6 speed in the works)
    1984 Mustang GT 2.3 Turbo Convertible FI. 5 speed manual
    1966 427 Cobra (ERA) 468 all Aluminum FE 2x4bbl 5 speed manual

    SOLD : 2003 Mercury Marauder FI. 4 speed Auto
    w/Crower Cams & Springs, +1mm SS valves, mild port job on the cylinder heads.
    Extrude honed intake w/PHP spacer.
    Kooks Headers w/2.5" High Flow Cats & X-Pipe, Magnaflow mufflers, OEM tailpipes w/Megs Tips
    B&M Trans cooler w/fan, Level 10 Shift Kit, Art Carr Hughes Deep Sump Trans Pan,
    SVO Rearend Girdle, Redline Gear lube; OEM 3.55s
    'Real Gauges' + matching Trans Temp, Oil Temp, Water Temp, Fuel Pressure, Vacuum/Boost Gauge
    Built: 10/15/02 Bought: 12/16/02 Sold: 10/15/18

  7. #7
    Join Date
    Mar 2004
    Location
    Baltimore, Md.
    Age
    64
    Posts
    11,665


    no one out there in need of a 'tougher rod'?

    2020 Ford Ranger STX DFI Turbo 2.3L 10 speed Auto
    2017 Ford Fusion Sport DFI Twin Turbo 2.7L V6 6 speed Auto (14.000 ET bone stock in 82 degree heat)
    1985 Mustang GT 5.0 Hatchback 4bbl 5 speed manual (525 HP 363 Dart block/AFR heads with Magnum 6 speed in the works)
    1984 Mustang GT 2.3 Turbo Convertible FI. 5 speed manual
    1966 427 Cobra (ERA) 468 all Aluminum FE 2x4bbl 5 speed manual

    SOLD : 2003 Mercury Marauder FI. 4 speed Auto
    w/Crower Cams & Springs, +1mm SS valves, mild port job on the cylinder heads.
    Extrude honed intake w/PHP spacer.
    Kooks Headers w/2.5" High Flow Cats & X-Pipe, Magnaflow mufflers, OEM tailpipes w/Megs Tips
    B&M Trans cooler w/fan, Level 10 Shift Kit, Art Carr Hughes Deep Sump Trans Pan,
    SVO Rearend Girdle, Redline Gear lube; OEM 3.55s
    'Real Gauges' + matching Trans Temp, Oil Temp, Water Temp, Fuel Pressure, Vacuum/Boost Gauge
    Built: 10/15/02 Bought: 12/16/02 Sold: 10/15/18

  8. #8
    Join Date
    Mar 2004
    Location
    Baltimore, Md.
    Age
    64
    Posts
    11,665
    SOLD! and shipped.
    2020 Ford Ranger STX DFI Turbo 2.3L 10 speed Auto
    2017 Ford Fusion Sport DFI Twin Turbo 2.7L V6 6 speed Auto (14.000 ET bone stock in 82 degree heat)
    1985 Mustang GT 5.0 Hatchback 4bbl 5 speed manual (525 HP 363 Dart block/AFR heads with Magnum 6 speed in the works)
    1984 Mustang GT 2.3 Turbo Convertible FI. 5 speed manual
    1966 427 Cobra (ERA) 468 all Aluminum FE 2x4bbl 5 speed manual

    SOLD : 2003 Mercury Marauder FI. 4 speed Auto
    w/Crower Cams & Springs, +1mm SS valves, mild port job on the cylinder heads.
    Extrude honed intake w/PHP spacer.
    Kooks Headers w/2.5" High Flow Cats & X-Pipe, Magnaflow mufflers, OEM tailpipes w/Megs Tips
    B&M Trans cooler w/fan, Level 10 Shift Kit, Art Carr Hughes Deep Sump Trans Pan,
    SVO Rearend Girdle, Redline Gear lube; OEM 3.55s
    'Real Gauges' + matching Trans Temp, Oil Temp, Water Temp, Fuel Pressure, Vacuum/Boost Gauge
    Built: 10/15/02 Bought: 12/16/02 Sold: 10/15/18

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Wanted To Buy 70 Boss 302 Connecting Rods
    By rolly in forum Other Parts/Misc. Wanted
    Replies: 0
    Last Post: 02-16-2013, 10:50 PM
  2. For Sale 03/04 Cobra Connecting Rods
    By na svt in forum Marauder-specific Parts for Sale
    Replies: 1
    Last Post: 11-23-2011, 04:16 PM
  3. For Sale 4.6 forged SHM Manley rods
    By markilla in forum Marauder-specific Parts for Sale
    Replies: 1
    Last Post: 08-29-2011, 06:38 AM
  4. For Sale Manley Forged pistons-rods for sale
    By juno in forum Marauder-specific Parts for Sale
    Replies: 10
    Last Post: 08-22-2011, 10:28 AM
  5. For Sale Manley 4.6 rods 2R3V-6200-AA
    By sidewayscoupe in forum Marauder-specific Parts for Sale
    Replies: 3
    Last Post: 07-06-2010, 07:25 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •