Page 1 of 2 12 LastLast
Results 1 to 15 of 17

Thread: Baer Decelarotors brake rotors front and back

  1. #1
    Join Date
    Aug 2009
    Location
    South Florida
    Posts
    314

    SOLD. Baer Decelarotors brake rotors front and back

    SOLD. Lock it up please

    Hey All,
    I am finding some more parts laying around here after the departure of my MM. I have here a set of front and rear Baer Decelarotors. The fronts were on my car for a month before I sold it. The rears are still sealed in Baer box. I was going to put them on my CV but never got around to it. These will fit 2003 Town Car, Crown Vic, Marauder, and Grand Marquis. The rears alone sell for around $180.

    Asking $200 for all of them. Local pick up only, sorry.
    Last edited by megaforcer; 08-17-2017 at 10:06 AM.


  2. #2
    Join Date
    Jun 2009
    Location
    Warsaw, Indiana
    Posts
    321
    Where is "local" please?

    Sent from my SM-G935T using Tapatalk
    Ride 1: 2003 300-A MM, black (naturally), K&N cold air, Granitelli Racing coils, Kybe shocks, Autometer "real" oil pressure and voltmeter, 14 inch front rotors and stainless lines from TCE with 6-piston Wilwood calipers and Hawk HPS pads, cryo-treated slotted rear rotors with TCE stainless lines and Hawk HPS pads, tune by Lidio, LED headlamps. Coming Soon: LED foglights, 200 Amp Alternator.

    Ride 2: 2001 Kenny Brown "Panther 2" Crown Victoria, Black. K&N cold air intake to Allen Engine Development supercharger system with water-to-air intercooled Eaton MP-90 at 8 pounds. Extensive chassis bracing, Brembo 4-piston front calipers on 13 inch rotors with stainless lines. Trunk-relocated Optima Red-Top. 5000K Bi-Xenon HID's. And much, much more.

  3. #3
    Join Date
    Jun 2009
    Location
    Warsaw, Indiana
    Posts
    321
    Quote Originally Posted by SteelQualityMan View Post
    Where is "local" please?

    Sent from my SM-G935T using Tapatalk
    Never mind. I forgot I could check your profile.

    Sent from my SM-G935T using Tapatalk
    Ride 1: 2003 300-A MM, black (naturally), K&N cold air, Granitelli Racing coils, Kybe shocks, Autometer "real" oil pressure and voltmeter, 14 inch front rotors and stainless lines from TCE with 6-piston Wilwood calipers and Hawk HPS pads, cryo-treated slotted rear rotors with TCE stainless lines and Hawk HPS pads, tune by Lidio, LED headlamps. Coming Soon: LED foglights, 200 Amp Alternator.

    Ride 2: 2001 Kenny Brown "Panther 2" Crown Victoria, Black. K&N cold air intake to Allen Engine Development supercharger system with water-to-air intercooled Eaton MP-90 at 8 pounds. Extensive chassis bracing, Brembo 4-piston front calipers on 13 inch rotors with stainless lines. Trunk-relocated Optima Red-Top. 5000K Bi-Xenon HID's. And much, much more.

  4. #4
    Join Date
    Mar 2008
    Location
    Next door to my neighbor
    Age
    50
    Posts
    20,353
    There're already in boxes. That's the hardest part of shipping.. It would really help your sale.


    Sent from my iPhone using Tapatalk
    SOLD 12/31/2021

    Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.

  5. #5
    Join Date
    Aug 2009
    Location
    South Florida
    Posts
    314
    They are very heavy. I don't know if the cost of shipping could be justified.

    Quote Originally Posted by justbob View Post
    There're already in boxes. That's the hardest part of shipping.. It would really help your sale.


    Sent from my iPhone using Tapatalk


  6. #6
    Join Date
    Aug 2009
    Location
    South Florida
    Posts
    314
    Bumpsky...


  7. #7
    Join Date
    Jun 2009
    Location
    Warsaw, Indiana
    Posts
    321
    These are the stock diameters and work with stock calipers or are they part of a "big brake" upgrade paçkage?

    Sent from my SM-G935T using Tapatalk
    Ride 1: 2003 300-A MM, black (naturally), K&N cold air, Granitelli Racing coils, Kybe shocks, Autometer "real" oil pressure and voltmeter, 14 inch front rotors and stainless lines from TCE with 6-piston Wilwood calipers and Hawk HPS pads, cryo-treated slotted rear rotors with TCE stainless lines and Hawk HPS pads, tune by Lidio, LED headlamps. Coming Soon: LED foglights, 200 Amp Alternator.

    Ride 2: 2001 Kenny Brown "Panther 2" Crown Victoria, Black. K&N cold air intake to Allen Engine Development supercharger system with water-to-air intercooled Eaton MP-90 at 8 pounds. Extensive chassis bracing, Brembo 4-piston front calipers on 13 inch rotors with stainless lines. Trunk-relocated Optima Red-Top. 5000K Bi-Xenon HID's. And much, much more.

  8. #8
    Join Date
    Nov 2012
    Location
    Sacramento
    Posts
    3,738
    Since the front are not new, probably not going to recoup.

    I am interested in set, but would need some t to be shipped.


    2003 300A Black, #4918 of 7838, 17,400 Miles
    Tune, KYB's, JLT, FlowMaster 42441, Res Delete, New BFG's, 8 coats of zymoil Titanium

    2003 300B Silver Birch, #21 of 419, 29,800 miles
    Tune, JLT, FlowMaster 42441 Res Delete, New Nitto 235/255 Bigcarsforever dead peddle & custom SRP peddles, 5 coats Zymoil Titanium, Addco front and rear sway bars, KYBs, 1/2 inch coil cut, Sparta Watts link and Control Arms, Carfixer alignment.

    2003 CV Sport Matador Red, 19,280 Miles, DD, Curless Full Service Royal flush, Marto Tune, 18 Chrome Wheels w 235/265 front/back Nitto tires, NEW OEM Sport Springs -1 coil & Monroe Severe Duty (front) shocks, Addco front and rear sway bars, KYB rear Shocks, Carfixer Alignment.

    2004 CV HPP Silver Birch, 93,000 miles. Son's DD, 18 Chrome Wheels w 235/265 front/back Nitto tires (thank you Lowndex!)

  9. #9
    Join Date
    Nov 2012
    Location
    Sacramento
    Posts
    3,738
    PS US POST has one price boxes, most expensive is $18.95. If they fit... (You must submit... To shipping).


    2003 300A Black, #4918 of 7838, 17,400 Miles
    Tune, KYB's, JLT, FlowMaster 42441, Res Delete, New BFG's, 8 coats of zymoil Titanium

    2003 300B Silver Birch, #21 of 419, 29,800 miles
    Tune, JLT, FlowMaster 42441 Res Delete, New Nitto 235/255 Bigcarsforever dead peddle & custom SRP peddles, 5 coats Zymoil Titanium, Addco front and rear sway bars, KYBs, 1/2 inch coil cut, Sparta Watts link and Control Arms, Carfixer alignment.

    2003 CV Sport Matador Red, 19,280 Miles, DD, Curless Full Service Royal flush, Marto Tune, 18 Chrome Wheels w 235/265 front/back Nitto tires, NEW OEM Sport Springs -1 coil & Monroe Severe Duty (front) shocks, Addco front and rear sway bars, KYB rear Shocks, Carfixer Alignment.

    2004 CV HPP Silver Birch, 93,000 miles. Son's DD, 18 Chrome Wheels w 235/265 front/back Nitto tires (thank you Lowndex!)

  10. #10
    Join Date
    Aug 2009
    Location
    South Florida
    Posts
    314
    Quote Originally Posted by SteelQualityMan View Post
    These are the stock diameters and work with stock calipers or are they part of a "big brake" upgrade paçkage?

    Sent from my SM-G935T using Tapatalk
    Stock diameter.


  11. #11
    Join Date
    Aug 2009
    Location
    South Florida
    Posts
    314
    Quote Originally Posted by 1Marauder View Post
    PS US POST has one price boxes, most expensive is $18.95. If they fit... (You must submit... To shipping).
    They don't fit into a Large Priority Mail box. We do not have any of the regional Priority Mail boxes like some other States do. I can ship but I am not paying for shipping costs, it will be up to the buyer. Or the buyer can send me a prepaid tag and I can drop them off.


  12. #12
    Join Date
    Aug 2009
    Location
    South Florida
    Posts
    314
    Sold..........
    Last edited by megaforcer; 08-17-2017 at 10:07 AM.


  13. #13
    Join Date
    Jun 2011
    Location
    Northeast OH
    Posts
    7,999
    did you try your local craigslist? plenty of crown vics etc in florida
    2004 SB Ported Trilogy 48
    Has supporting mods and stuff
    Thanks to Marty O for his help in updating this car.

    R.I.P.
    Rex "SC Cheesehead"

  14. #14
    Join Date
    Aug 2009
    Location
    South Florida
    Posts
    314
    I try to stay away from CL. It might be different in other States but here it's filled with a bunch of creeps and scammers.


  15. #15
    Join Date
    Aug 2009
    Location
    South Florida
    Posts
    314
    Sold..........
    Last edited by megaforcer; 08-17-2017 at 10:07 AM.


Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Baer Big Brake 14" Kit feed back needed
    By 2,4shofast in forum Steering, Suspension & Brakes
    Replies: 54
    Last Post: 04-17-2010, 07:55 AM
  2. Baer sloted rotors
    By scruff in forum Steering, Suspension & Brakes
    Replies: 3
    Last Post: 03-18-2010, 05:18 PM
  3. Baer BIG Brake kit rotors.......
    By sd8683 in forum Steering, Suspension & Brakes
    Replies: 3
    Last Post: 09-16-2009, 03:17 PM
  4. To avoid warping Baer brake rotors:(break-in)
    By BillyGman in forum Steering, Suspension & Brakes
    Replies: 3
    Last Post: 03-01-2006, 07:37 AM
  5. Replaced my two Baer 14 in. front rotors
    By John F. Russo in forum Community Discussion
    Replies: 13
    Last Post: 10-07-2003, 03:21 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •