Changing oil today and found hose twice it normal size . Ford no longer makes them and the aftermarket ones are 1/4 inch too small . Anyone have a good oem lower hose from engine to thermostat ? It’s the short one about 7 inches long.
Member
Changing oil today and found hose twice it normal size . Ford no longer makes them and the aftermarket ones are 1/4 inch too small . Anyone have a good oem lower hose from engine to thermostat ? It’s the short one about 7 inches long.
03 black mm stock, daily driver
04 silver mm Easton swap, 4.10, full SW exhaust, and more. 428 rwhp ,419 rwtq tuned by MO's
GAME OVER, YOU LOSE!
Take it to your local FLAPS and see if there is one similar or that can be cut out from a longer hose.
Sick-Speed play toy
You can cut the section that’s bad off the tee fitting quite easily and replace it with a match up trimmed to fit like already mentioned. Just use a clamp when mating the new one to the tee. You could do all three and just reuse the tee if you really wanted.
That’s what I did for my radiator and coolant tank side when I replaced both of them with custom ones.
Sent from my iPhone using Tapatalk
SOLD 12/31/2021
Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.
Dark lord of the UNDERGROUND
Originally Posted by Mr. Man
FLAPS ?, what is flaps ?
Enviado desde mi iPhone utilizando Tapatalk
GOLD P74 INTERCEPTOR, A NEW PANTHER IN TOWN.
Senior Member
FLAPS: Favorite Local Auto Parts Store.
(Pep Boys, C.A.P., NAPA, Advanced, O'Reilly's, Autozone, etc.)
Senior Member
I think a number of members, including myself had the same issue a little while back:
https://www.mercurymarauder.net/foru...d.php?t=103012
Member
Found a hose that should work. Cut to fit. Thank u for the help.
03 black mm stock, daily driver
04 silver mm Easton swap, 4.10, full SW exhaust, and more. 428 rwhp ,419 rwtq tuned by MO's
73 is the best number.
Let us know where you found it...part number...anything else to help.
The Blackbird
Trilogy #61
Driveway Queen
The Spruce Goose
2004 Grand Marquis LS Limited Edition
Daily Driver
Member
Hose is a Gates 20687 for O’Reilly auto parts.
03 black mm stock, daily driver
04 silver mm Easton swap, 4.10, full SW exhaust, and more. 428 rwhp ,419 rwtq tuned by MO's
73 is the best number.
Cool...thanks!
The Blackbird
Trilogy #61
Driveway Queen
The Spruce Goose
2004 Grand Marquis LS Limited Edition
Daily Driver
Trying to get it right...
Yes, thanks, making note of that. Mine is looking a bit soft and slightly bloated.
2003 black pre-decontented 300B #5886 of 7838; Born on 10/31/02
MartyO tune, 4:10's, T/A stud & girdle, MMX shaft+DS loop, Metco control arms, Quickor RSB, Addco FSB, Megs delete tips, Granatelli solid coil connectors, NGK plugs & LP 170 stat, DR rear engine cooling mod, PI 3000 TC, Level II tranny, Art Carr deep pan, Steeda pullies/billet caps, billet door locks, Ford Racing oil cap / polished coil covers, PHP CAK & Metco carbon fiber intake, DG Motorsports CF radiator cover, Fumoto oil drain valve, oil deflector, real Autometer gauges, ScanGauge II, Weatherflectors, underbody lighting kit, Zack chrome grill, OEM spoiler & door edge guards, KB dead pedal, Dynopro aluminum sills & pedals, Viper alarm w/ remote start, MM fender badges, red painted calipers, SS inserts, Silverstar Ultras, hood bumpers, 35% tints, Gorilla lug nuts, MM valve caps, Pro-Guard, DD trunk lid liner, CM UHI kit, CM Godshead rear & steering wheel badges, S-55 badge, FilterMag, MM trunk bib, ported sub-woofer.
Sick-Speed play toy
That looks pretty close. It looks like you’ll be separating one section then?
Sent from my iPhone using Tapatalk
SOLD 12/31/2021
Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote