BurnOutcrop.jpg
SSHS - 2006 As 007
BurnOutcrop.jpg
SSHS - 2006 As 007
1/4 Mile Time 11.542 @ 121.19 MPH
195,000 Miles & 275+ Runs Down the 1,320’
541.57 RWHP & 476.64 RWTQ on DynoJet
Tuned by Aric at Injected Engineering
Vortech Super Charger V-2 “T” Trim, 19 PSI
8 Rib Belt, Innovators West 10% Overdrive Dampner
Air to Air Intercooler, Mini-race Bypass
Ford Cobra Remanufactured Long Block
Snow Performance Water-Methanol Injection
Kooks Headers & X Pipe
GT MAF, 60lb injectors, Dash 8, Aero Rails, Twin Ford GT Pumps,
Kinsler Fuel Filter, Kenne Bell Boost-A-Pump
Monroe Sensatrac, Metco Control Arms, Addco Rear Sway Bar
31 Ford Spline Axles & Detroit Truetrac, 4:10 Ford Racing Gears
Dynotech MMC Driveshaft
A-1 Performance Trans, Forced Tailshaft Lube, Carbon Clutches
3,500 RPM Stall Precision Industries Torque Converter
B&M Deep Finned Trans Pan
AeroForce Scan Gauges , Auto Meter Oil, Fuel & Boost Gauges
Kenny Brown Dead Pedal, 35% Tint, Silver Star Head Lights
AutoPage Alarm RS-727LCD, Boston Acoustic NX87
Well I got my goal, went to the track last night. Launched at 11psi and cut a 1.56 60' , seemed to hold and not spin. Hit a peak of 18psi on the pull. But I was banging on the rev limiter top of 3rd at the end of the track. Track officials made a trip by me in the pits and gave me a warning for being to fast w/o a cage.
2019-10-04_11-18-27 by Cheapthrillb2, on Flickr
So I made some adjustments in the tune, raised the rpm shift point of the 2-3, and raised the rev limiter a couple hundred to try and keep it off the rev limiter. Also bumped peak boost to 20-21psi. Unfortunately, my next pass the track didn't hold the launch and I spun. Got out of it, got back into it to the 1/8th then coasted to the 1/4, still ran a 14 sec lol. Then my fourth and final pass, I launched at 11 psi again and my yukon duragrip blew apart . Specifically the two smaller spiders gears broken in half.
2019-10-05_01-29-35 by Cheapthrillb2, on Flickr
2019-10-05_03-44-17 by Cheapthrillb2, on Flickr
Shock loaded the drive train, so I'm gonna pull the trans as well and have it gone through for inspection. Car has 4.10s in it, they appear to have survived, but I have a set of 3.55's on the shelf I've been meaning to put in. Guess now is a good time. But I need to decide what direction to go for a new carrier.
Last edited by cheapthrillb2; 10-05-2019 at 01:16 PM.
2003 budget built marauder-LM7 5.3 SBE 4L80E VS racing 78/75 turbo and other things
1.56 60' 6.80 1/8 @ 104 mph 10.5 1/4 @129 mph
#BSTDMRC #LSSWAPPEDMARAUDER
Instagram -
Cheapthrillb2
lsswappedmarauder
Man that 10.78 kinda made it worth the trouble.
Whats the weight on this swapped MM? What tire?
Damn a 10.78......
Last time at the track the scales showed 4700 lbs. Scales weren't working last night.
275-60/15 et/ss 18psi
10 sec 1/4 mile and 600+ rwhp was my goal for this car in the begining. I think I've achieved my goals. Now to fix it, and turn it down and enjoy it.
2003 budget built marauder-LM7 5.3 SBE 4L80E VS racing 78/75 turbo and other things
1.56 60' 6.80 1/8 @ 104 mph 10.5 1/4 @129 mph
#BSTDMRC #LSSWAPPEDMARAUDER
Instagram -
Cheapthrillb2
lsswappedmarauder
Video of my 4 passes, both dash cam and outside video.
https://youtu.be/WgMLT7CQBpQ
2003 budget built marauder-LM7 5.3 SBE 4L80E VS racing 78/75 turbo and other things
1.56 60' 6.80 1/8 @ 104 mph 10.5 1/4 @129 mph
#BSTDMRC #LSSWAPPEDMARAUDER
Instagram -
Cheapthrillb2
lsswappedmarauder
Make a clock like I did.
Congrats!
Sent from my iPhone using Tapatalk Pro
SOLD 12/31/2021
Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.
That's gotta be one heavy clock lol.
2003 budget built marauder-LM7 5.3 SBE 4L80E VS racing 78/75 turbo and other things
1.56 60' 6.80 1/8 @ 104 mph 10.5 1/4 @129 mph
#BSTDMRC #LSSWAPPEDMARAUDER
Instagram -
Cheapthrillb2
lsswappedmarauder
SOLD 12/31/2021
Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.
I think I've decided to replace the duragrip with a tru-Trac.
2003 budget built marauder-LM7 5.3 SBE 4L80E VS racing 78/75 turbo and other things
1.56 60' 6.80 1/8 @ 104 mph 10.5 1/4 @129 mph
#BSTDMRC #LSSWAPPEDMARAUDER
Instagram -
Cheapthrillb2
lsswappedmarauder
I've used an OEM 31-spline Trac Loc and OEM 31 spline axles on both of my S/C'd Marauders with great success. It's a cheap and reliable alternative. You can usually find used 05 and up complete axle assemblies for $200.
You "feel" the difference because you want to "feel" the difference. Since you just spent money on the upgrade you "have" to feel the difference
I'm looking to eliminate the double pump process I have to follow right now to get the pedal hard
2004 300A Procharger #0010 D1X
2003 300A Procharger #0017 D1SC (SOLD. Last I heard, it was in Washington State)
My shafts are already 31 spline chromo. I want to get away from spider gears. Considering I shattered these launching at 11 psi with drag radials. Looking around and talking with alot of guys in similar power cars, alot have had great results with the true Trac.
2003 budget built marauder-LM7 5.3 SBE 4L80E VS racing 78/75 turbo and other things
1.56 60' 6.80 1/8 @ 104 mph 10.5 1/4 @129 mph
#BSTDMRC #LSSWAPPEDMARAUDER
Instagram -
Cheapthrillb2
lsswappedmarauder
I’ve also heard good things about the Trutrac. Stop making so much power and you won’t blow things up
You "feel" the difference because you want to "feel" the difference. Since you just spent money on the upgrade you "have" to feel the difference
I'm looking to eliminate the double pump process I have to follow right now to get the pedal hard
2004 300A Procharger #0010 D1X
2003 300A Procharger #0017 D1SC (SOLD. Last I heard, it was in Washington State)
Update, I purchased FRP 3.55's to replace the 4.10s. And A tru-trac to replace the duragrip. I've nothing but trouble trying to get the gears installed and set up correctly. Was doing it at home on jackstands, and with my wrecked back it was hell. I need to get the car out of the garage one way or another. So I just tossed them in sloppy after several hrs of messing around with them, to get it to move. That was a two weeks or so ago.
Yesterday I trailed it to a buddies who has a hoist to reset the gears, still, after hrs cannot get a good pattern. Ended up calling it a day yesterday after my back started to flare up. Can only take that carrier in and out so many times. Try again Friday, but have a buddy coming by who sets gears for a living. I've set up way more then my share over the years, idk whats going on with this setup. The FRP 4.10s damn near dropped in perfect first try.
I also pulled the 4l80 out and had it gone through to make sure there was no collateral damage from the locker failure (shock load), we found nothing damaged. That was a relief.
2019-12-24_10-43-03 by Cheapthrillb2, on Flickr
2019-12-25_10-00-36 by Cheapthrillb2, on Flickr
Don't have a lot of winter plans for the car, probably change up the exhaust again. Run it out the back to mimic stock, and replace the boost valve with a electric cutout instead. Most my attention will be out towards the jeep this winter.
I did pick up a new daily driver/commuter car ( I hate driving my truck in the salt). Drove from Grand Rapids MI to Cincinnati OH and bout a 2004 Town Car ultimate with 70K on it. Was looking for a dark blue ext and black interior but those are apparently like unicorns. Spent two months looking and only found two and both weren't in the best of shape. Settled for a silver birch ext and black interior
Last edited by cheapthrillb2; 12-25-2019 at 08:17 AM.
2003 budget built marauder-LM7 5.3 SBE 4L80E VS racing 78/75 turbo and other things
1.56 60' 6.80 1/8 @ 104 mph 10.5 1/4 @129 mph
#BSTDMRC #LSSWAPPEDMARAUDER
Instagram -
Cheapthrillb2
lsswappedmarauder
I too had a heck of a time getting a good pattern. It was my first attempt at gears. Did another buddies Marauder after that and it was perfect on the first try.
You "feel" the difference because you want to "feel" the difference. Since you just spent money on the upgrade you "have" to feel the difference
I'm looking to eliminate the double pump process I have to follow right now to get the pedal hard
2004 300A Procharger #0010 D1X
2003 300A Procharger #0017 D1SC (SOLD. Last I heard, it was in Washington State)
Now thats a Clock that is on TYME ! Got to get one/
Roger that
Assembled 8/25/03. In service 11/5/03.[Safford Lincoln Mercury] . Returned from Service to Dundalk Lincoln Mercury 7/12/11 Adopted and reassigned to Street Duty 7/29/11 .at Car Center [Waldorf Ford] /Waldorf MD. # 27 of 997 silver burch #103 of 3214 Sold Oct 17, 2015. Replaced with 2016 XLT Explorer with 3:66 gear 4WD [ interceptor package] In addition 2015 -V6 Mustang added to the corral April 17,2015 with Roush upgrades .February 2018 upgraded to Explorer Sport , Ford blue ,intake upgrade, intake mod, Unleashed super tune, Governor removed. 1969 Mark III ,Forest Green still in fleet. Carlisle favorite .
There are currently 3 users browsing this thread. (0 members and 3 guests)