Results 1 to 6 of 6

Thread: OEM Trunk Organizer (Located NNJ)

  1. #1
    Join Date
    Mar 2007
    Location
    Lehigh Valley, PA
    Posts
    5,558

    OEM Trunk Organizer (Located NNJ)

    I have a nice semi-hard to find piece up for grabs, an OEM trunk organizer.

    It needs a vacuum on top but otherwise, the doors aren't warped, everything shuts properly and the tub is in good shape. This is a very nice piece!


    $300, at this time I'd prefer not to ship.

    Located in Califon, NJ



    2016 Ford Mustang GT PP - Stock
    13.08 @ 110.12mph

    2004 Mercury Marauder - Eaton M112, Billetflow 3.4, Accufab SBTB + Plenum, T-56 Magnum, 4.10's, Stainless Works LT's, 2.5" Exhaust, Borla Stingers, Ridetech Coilovers + Adj rear shocks, FX-R projectors, S55 Gauge Cluster
    12.1 @ 112.27mph (w/ 4R75W)
    440rwhp & 406rwtq Tuned by Adam @ Revolution Automotive

    2003 Mercury Marauder - Stainless Works LT's, Stainless Works 2.5" Catback, Wilwood 13" BNSL6 BBK, JLT Intake, Mo's Xcal4 Tune
    5377/7839

    2000 BMW M5 - Evolve Intake, Evolve Alpha-N tune, Stoptech ST-40 BBK, UUC SSK, Dinan front STB, Dinan RSB

    1996 Ford Bronco - 4" lift, 35" BFG A/T's, Punisher Valve Body, MH1 Projectors

  2. #2
    Join Date
    Mar 2008
    Location
    Couple of car lengths ahead of you
    Age
    45
    Posts
    19,137
    Hi Ryan


    Sent from my iPhone using Tapatalk Pro


    Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.

  3. #3
    Join Date
    Mar 2007
    Location
    Lehigh Valley, PA
    Posts
    5,558
    Quote Originally Posted by justbob View Post
    Hi Ryan


    Sent from my iPhone using Tapatalk Pro



    1234567890
    2016 Ford Mustang GT PP - Stock
    13.08 @ 110.12mph

    2004 Mercury Marauder - Eaton M112, Billetflow 3.4, Accufab SBTB + Plenum, T-56 Magnum, 4.10's, Stainless Works LT's, 2.5" Exhaust, Borla Stingers, Ridetech Coilovers + Adj rear shocks, FX-R projectors, S55 Gauge Cluster
    12.1 @ 112.27mph (w/ 4R75W)
    440rwhp & 406rwtq Tuned by Adam @ Revolution Automotive

    2003 Mercury Marauder - Stainless Works LT's, Stainless Works 2.5" Catback, Wilwood 13" BNSL6 BBK, JLT Intake, Mo's Xcal4 Tune
    5377/7839

    2000 BMW M5 - Evolve Intake, Evolve Alpha-N tune, Stoptech ST-40 BBK, UUC SSK, Dinan front STB, Dinan RSB

    1996 Ford Bronco - 4" lift, 35" BFG A/T's, Punisher Valve Body, MH1 Projectors

  4. #4
    Join Date
    Oct 2018
    Location
    Tennessee
    Posts
    8
    Hey hey pm sent

  5. #5
    Join Date
    Mar 2007
    Location
    Lehigh Valley, PA
    Posts
    5,558
    Sale Pending
    2016 Ford Mustang GT PP - Stock
    13.08 @ 110.12mph

    2004 Mercury Marauder - Eaton M112, Billetflow 3.4, Accufab SBTB + Plenum, T-56 Magnum, 4.10's, Stainless Works LT's, 2.5" Exhaust, Borla Stingers, Ridetech Coilovers + Adj rear shocks, FX-R projectors, S55 Gauge Cluster
    12.1 @ 112.27mph (w/ 4R75W)
    440rwhp & 406rwtq Tuned by Adam @ Revolution Automotive

    2003 Mercury Marauder - Stainless Works LT's, Stainless Works 2.5" Catback, Wilwood 13" BNSL6 BBK, JLT Intake, Mo's Xcal4 Tune
    5377/7839

    2000 BMW M5 - Evolve Intake, Evolve Alpha-N tune, Stoptech ST-40 BBK, UUC SSK, Dinan front STB, Dinan RSB

    1996 Ford Bronco - 4" lift, 35" BFG A/T's, Punisher Valve Body, MH1 Projectors

  6. #6
    Join Date
    Mar 2007
    Location
    Lehigh Valley, PA
    Posts
    5,558
    Sold!

    12315469789
    2016 Ford Mustang GT PP - Stock
    13.08 @ 110.12mph

    2004 Mercury Marauder - Eaton M112, Billetflow 3.4, Accufab SBTB + Plenum, T-56 Magnum, 4.10's, Stainless Works LT's, 2.5" Exhaust, Borla Stingers, Ridetech Coilovers + Adj rear shocks, FX-R projectors, S55 Gauge Cluster
    12.1 @ 112.27mph (w/ 4R75W)
    440rwhp & 406rwtq Tuned by Adam @ Revolution Automotive

    2003 Mercury Marauder - Stainless Works LT's, Stainless Works 2.5" Catback, Wilwood 13" BNSL6 BBK, JLT Intake, Mo's Xcal4 Tune
    5377/7839

    2000 BMW M5 - Evolve Intake, Evolve Alpha-N tune, Stoptech ST-40 BBK, UUC SSK, Dinan front STB, Dinan RSB

    1996 Ford Bronco - 4" lift, 35" BFG A/T's, Punisher Valve Body, MH1 Projectors

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. For Sale Trunk Organizer
    By HotRodKristina in forum Marauder-specific Parts for Sale
    Replies: 5
    Last Post: 05-24-2011, 07:38 PM
  2. For Sale SCT, K&N, Trunk organizer
    By BLACK SHEEP in forum Marauder-specific Parts for Sale
    Replies: 21
    Last Post: 05-16-2011, 11:31 AM
  3. Wanted To Buy Trunk Organizer
    By tdotcv in forum Marauder Parts/Misc. Wanted
    Replies: 7
    Last Post: 04-20-2011, 12:30 PM
  4. looking for trunk organizer
    By playbackreks in forum Community Discussion
    Replies: 8
    Last Post: 11-13-2006, 10:22 AM
  5. mat that comes with the trunk organizer.
    By Todd in forum Community Discussion
    Replies: 6
    Last Post: 03-20-2005, 06:35 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •