Hell no. That would all be cancelled orders on my end! There is always a better route to achieve an even higher goal, it’s just not always easily found and usually costs a bit more..
Sent from my iPhone using Tapatalk Pro
SOLD 12/31/2021
Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.
Like was mentioned, the 3rd gen Coyote has some additional headaches over the gen 2.
Ex Panther Owner
Ls = no need for aftermarket blocks, cranks, rods, heads, rocker arms, lifters.........and go 9's in the 1/4 on motor with pump gas...
I have a dry sump Ls7 long block for sale.......I could cut the crank here at Roush so you can go wet sump.... ; )
2020 Ford Ranger STX DFI Turbo 2.3L 10 speed Auto
2017 Ford Fusion Sport DFI Twin Turbo 2.7L V6 6 speed Auto (14.000 ET bone stock in 82 degree heat)
1985 Mustang GT 5.0 Hatchback 4bbl 5 speed manual (525 HP 363 Dart block/AFR heads with Magnum 6 speed in the works)
1984 Mustang GT 2.3 Turbo Convertible FI. 5 speed manual
1966 427 Cobra (ERA) 468 all Aluminum FE 2x4bbl 5 speed manual
SOLD : 2003 Mercury Marauder FI. 4 speed Auto
w/Crower Cams & Springs, +1mm SS valves, mild port job on the cylinder heads.
Extrude honed intake w/PHP spacer.
Kooks Headers w/2.5" High Flow Cats & X-Pipe, Magnaflow mufflers, OEM tailpipes w/Megs Tips
B&M Trans cooler w/fan, Level 10 Shift Kit, Art Carr Hughes Deep Sump Trans Pan,
SVO Rearend Girdle, Redline Gear lube; OEM 3.55s
'Real Gauges' + matching Trans Temp, Oil Temp, Water Temp, Fuel Pressure, Vacuum/Boost Gauge
Built: 10/15/02 Bought: 12/16/02 Sold: 10/15/18
Update:
I'm waiting on the DART 8.2" block and the Edelbrock RPM AirGap intake manifold.
My engine builder says that LOTS of parts are on SERIOUS long lead time/backorder right now.
Even Chevy SB parts are on backorder....lol
January looks like the delivery time for most of the backordered parts.
I just ordered the 5 lug rims and the Holley Sniper Stealth EFI for the car.
Last edited by Joe Walsh; 12-05-2021 at 10:42 AM.
2020 Ford Ranger STX DFI Turbo 2.3L 10 speed Auto
2017 Ford Fusion Sport DFI Twin Turbo 2.7L V6 6 speed Auto (14.000 ET bone stock in 82 degree heat)
1985 Mustang GT 5.0 Hatchback 4bbl 5 speed manual (525 HP 363 Dart block/AFR heads with Magnum 6 speed in the works)
1984 Mustang GT 2.3 Turbo Convertible FI. 5 speed manual
1966 427 Cobra (ERA) 468 all Aluminum FE 2x4bbl 5 speed manual
SOLD : 2003 Mercury Marauder FI. 4 speed Auto
w/Crower Cams & Springs, +1mm SS valves, mild port job on the cylinder heads.
Extrude honed intake w/PHP spacer.
Kooks Headers w/2.5" High Flow Cats & X-Pipe, Magnaflow mufflers, OEM tailpipes w/Megs Tips
B&M Trans cooler w/fan, Level 10 Shift Kit, Art Carr Hughes Deep Sump Trans Pan,
SVO Rearend Girdle, Redline Gear lube; OEM 3.55s
'Real Gauges' + matching Trans Temp, Oil Temp, Water Temp, Fuel Pressure, Vacuum/Boost Gauge
Built: 10/15/02 Bought: 12/16/02 Sold: 10/15/18
It took 5 weeks to get an American made forged rotating assembly from Manley. it's scheduled to deliver on Monday.
You "feel" the difference because you want to "feel" the difference. Since you just spent money on the upgrade you "have" to feel the difference
I'm looking to eliminate the double pump process I have to follow right now to get the pedal hard
2004 300A Procharger #0010 D1X
2003 300A Procharger #0017 D1SC (SOLD. Last I heard, it was in Washington State)
Joe, if you can, get the sniper with the remote ECM. Think its the terminator series. It seems the fords have RFI problems because the computer is near the dizzy.
But who knows could be careless installs.
~Chris
I'd heard that the FiTech systems can have problems with Ignition noise/RFI...nothing about the Holley Sniper systems.
I'll have to carefully route the ignition wires as far away from the ECM as possible and maybe even shield the ECM form the distributor.
2020 Ford Ranger STX DFI Turbo 2.3L 10 speed Auto
2017 Ford Fusion Sport DFI Twin Turbo 2.7L V6 6 speed Auto (14.000 ET bone stock in 82 degree heat)
1985 Mustang GT 5.0 Hatchback 4bbl 5 speed manual (525 HP 363 Dart block/AFR heads with Magnum 6 speed in the works)
1984 Mustang GT 2.3 Turbo Convertible FI. 5 speed manual
1966 427 Cobra (ERA) 468 all Aluminum FE 2x4bbl 5 speed manual
SOLD : 2003 Mercury Marauder FI. 4 speed Auto
w/Crower Cams & Springs, +1mm SS valves, mild port job on the cylinder heads.
Extrude honed intake w/PHP spacer.
Kooks Headers w/2.5" High Flow Cats & X-Pipe, Magnaflow mufflers, OEM tailpipes w/Megs Tips
B&M Trans cooler w/fan, Level 10 Shift Kit, Art Carr Hughes Deep Sump Trans Pan,
SVO Rearend Girdle, Redline Gear lube; OEM 3.55s
'Real Gauges' + matching Trans Temp, Oil Temp, Water Temp, Fuel Pressure, Vacuum/Boost Gauge
Built: 10/15/02 Bought: 12/16/02 Sold: 10/15/18
If you are on facebook, there is a group and you can read all the horror stories. Lol. I have the super sniper for my V6 build so we'll see how it goes.
~Chris
2020 Ford Ranger STX DFI Turbo 2.3L 10 speed Auto
2017 Ford Fusion Sport DFI Twin Turbo 2.7L V6 6 speed Auto (14.000 ET bone stock in 82 degree heat)
1985 Mustang GT 5.0 Hatchback 4bbl 5 speed manual (525 HP 363 Dart block/AFR heads with Magnum 6 speed in the works)
1984 Mustang GT 2.3 Turbo Convertible FI. 5 speed manual
1966 427 Cobra (ERA) 468 all Aluminum FE 2x4bbl 5 speed manual
SOLD : 2003 Mercury Marauder FI. 4 speed Auto
w/Crower Cams & Springs, +1mm SS valves, mild port job on the cylinder heads.
Extrude honed intake w/PHP spacer.
Kooks Headers w/2.5" High Flow Cats & X-Pipe, Magnaflow mufflers, OEM tailpipes w/Megs Tips
B&M Trans cooler w/fan, Level 10 Shift Kit, Art Carr Hughes Deep Sump Trans Pan,
SVO Rearend Girdle, Redline Gear lube; OEM 3.55s
'Real Gauges' + matching Trans Temp, Oil Temp, Water Temp, Fuel Pressure, Vacuum/Boost Gauge
Built: 10/15/02 Bought: 12/16/02 Sold: 10/15/18
The Fedex man dropped off some goodies for the Foxbody 363 build!
Sent from my Pixel 2 XL using Tapatalk
2020 Ford Ranger STX DFI Turbo 2.3L 10 speed Auto
2017 Ford Fusion Sport DFI Twin Turbo 2.7L V6 6 speed Auto (14.000 ET bone stock in 82 degree heat)
1985 Mustang GT 5.0 Hatchback 4bbl 5 speed manual (525 HP 363 Dart block/AFR heads with Magnum 6 speed in the works)
1984 Mustang GT 2.3 Turbo Convertible FI. 5 speed manual
1966 427 Cobra (ERA) 468 all Aluminum FE 2x4bbl 5 speed manual
SOLD : 2003 Mercury Marauder FI. 4 speed Auto
w/Crower Cams & Springs, +1mm SS valves, mild port job on the cylinder heads.
Extrude honed intake w/PHP spacer.
Kooks Headers w/2.5" High Flow Cats & X-Pipe, Magnaflow mufflers, OEM tailpipes w/Megs Tips
B&M Trans cooler w/fan, Level 10 Shift Kit, Art Carr Hughes Deep Sump Trans Pan,
SVO Rearend Girdle, Redline Gear lube; OEM 3.55s
'Real Gauges' + matching Trans Temp, Oil Temp, Water Temp, Fuel Pressure, Vacuum/Boost Gauge
Built: 10/15/02 Bought: 12/16/02 Sold: 10/15/18
Nice setup Joe
Ahhh nostalgia.
There are currently 1 users browsing this thread. (0 members and 1 guests)