Page 1 of 4 1234 LastLast
Results 1 to 15 of 55

Thread: 03 maurader spider gears?

  1. #1
    Join Date
    Aug 2018
    Location
    Somersworth New Hampshire
    Posts
    105

    03 marauder spider gears?

    Hi everyone...I cant seem to get my hands on a new set of spider gears. I've had Ford and my local auto parts stores send me gears but they are all wrong. Ford tells me they no longer carry the 28 spline gears for the maurader. I was under the impression that a 8.8 and its replacement parts where all the same. but they tell me that the marauder is very different from a mustang 8.8 or pickup truck 8.8. I know splines could be 28 or 31 but mine has 28.
    The gears everyone sends me are larger in diameter and they have a bevel edge and a shorter profile. My planitaries are a straight cut edge and taller. I'm having a hard time uploading pics of my original gears.
    Any help would greatly be appreciated.
    Last edited by Maverick pro; 09-12-2019 at 05:43 PM.
    03 black 300A # 2827 stock setup 275,000 on car. 65,000 on engine from a 04. 03 engine died at 273,000 . Rear cat delete with magnaflow 11256 mufflers.

  2. #2
    Join Date
    Apr 2010
    Location
    South Florida
    Age
    34
    Posts
    1,870

    03 maurader spider gears?

    Yukon P-28 kit eBay should work, I need them also.


    You have a LSD (or posi) differential and most of them are open carriers on other cars. 1 wheel peel.

    Sent from my iPhone using Tapatalk Pro

  3. #3
    Join Date
    Aug 2018
    Location
    Somersworth New Hampshire
    Posts
    105
    Quote Originally Posted by 03Merc View Post
    Yukon P-28 kit eBay should work, I need them also.


    You have a LSD (or posi) differential and most of them are open carriers on other cars. 1 wheel peel.

    Sent from my iPhone using Tapatalk Pro
    The last kit I was told would be perfect are the Yukon #16015.
    The Yukon # 39015 where wrong. I have clutch packs so I'm guessing its lsd? It does have the S clip that holds tension on the gears.
    Thanks
    03 black 300A # 2827 stock setup 275,000 on car. 65,000 on engine from a 04. 03 engine died at 273,000 . Rear cat delete with magnaflow 11256 mufflers.

  4. #4
    Join Date
    Aug 2018
    Location
    Somersworth New Hampshire
    Posts
    105
    Quote Originally Posted by 03Merc View Post
    Yukon P-28 kit eBay should work, I need them also.


    You have a LSD (or posi) differential and most of them are open carriers on other cars. 1 wheel peel.

    Sent from my iPhone using Tapatalk Pro
    Just cross checked the p-28 kit and that is Yukon 16015. They look nothing like my original gears but I'm hoping they work. That's the last kit I'm ordering. If they dont work I'm going to try a full replacement carrier.
    Thanks...
    03 black 300A # 2827 stock setup 275,000 on car. 65,000 on engine from a 04. 03 engine died at 273,000 . Rear cat delete with magnaflow 11256 mufflers.

  5. #5
    Join Date
    Apr 2010
    Location
    South Florida
    Age
    34
    Posts
    1,870
    Quote Originally Posted by Maverick pro View Post
    Just cross checked the p-28 kit and that is Yukon 16015. They look nothing like my original gears but I'm hoping they work. That's the last kit I'm ordering. If they dont work I'm going to try a full replacement carrier.
    Thanks...
    Whole carriers can get pricey! Lmk what You accomplish with the p-28 set.


    Sent from my iPhone using Tapatalk Pro

  6. #6
    Join Date
    Jun 2011
    Location
    Northeast OH
    Posts
    7,999
    Quote Originally Posted by Maverick pro View Post
    Just cross checked the p-28 kit and that is Yukon 16015. They look nothing like my original gears but I'm hoping they work. That's the last kit I'm ordering. If they dont work I'm going to try a full replacement carrier.
    Thanks...
    Just below picture " Image may vary from actual product"
    2004 SB Ported Trilogy 48
    Has supporting mods and stuff
    Thanks to Marty O for his help in updating this car.

    R.I.P.
    Rex "SC Cheesehead"

  7. #7
    Join Date
    Aug 2018
    Location
    Somersworth New Hampshire
    Posts
    105
    Quote Originally Posted by RubberCtyRauder View Post
    Just below picture " Image may vary from actual product"
    True but every set of gears I've gotten look like those gears with the beveled edge. Hopefully they workout but they are 4 days out. My gears look just like the gears out of a 03 04 IRS cobra but 28 spline
    Thank
    03 black 300A # 2827 stock setup 275,000 on car. 65,000 on engine from a 04. 03 engine died at 273,000 . Rear cat delete with magnaflow 11256 mufflers.

  8. #8
    Join Date
    Aug 2018
    Location
    Somersworth New Hampshire
    Posts
    105
    Quote Originally Posted by 03Merc View Post
    Whole carriers can get pricey! Lmk what You accomplish with the p-28 set.


    Sent from my iPhone using Tapatalk Pro
    I will definitely let you know if they work out. I cant believe how hard it is to get correct gears.
    Thanks
    03 black 300A # 2827 stock setup 275,000 on car. 65,000 on engine from a 04. 03 engine died at 273,000 . Rear cat delete with magnaflow 11256 mufflers.

  9. #9
    Join Date
    Nov 2014
    Location
    KC
    Age
    48
    Posts
    3,511
    why not just get 31 spline spider gears and axles and reuse the stock carrier?
    The twins2.3 whipple/aluminatorVortech V-2 lots of goodies

    Current marauders
    04 DTR totaled JUST NOW starting to part out 7-21-2021 https://youtu.be/REUxjP1BVpg

    04 Silver Birch Dark Charcoal Hardtop Whipple Supercharger
    04 Silver Birch Dark Charcoal Hardtop V2 Supercharger
    04 Silver Birch Dark Charcoal Converted
    03 DBP Light Flint #122
    03 DBP Dark Charcoal #232
    03 Silver Birch 300b Light Flint Going to fix er up
    03 Black 300a
    04 Silver Birch Dark Charcoal moonroof in the works

    04 Heaton Swapped DTR
    Joe's Wrecked DTR rebuild thread

  10. #10
    Join Date
    Jan 2013
    Location
    Indiana
    Posts
    212
    Quote Originally Posted by Maverick pro View Post
    Just cross checked the p-28 kit and that is Yukon 16015. They look nothing like my original gears but I'm hoping they work. That's the last kit I'm ordering. If they dont work I'm going to try a full replacement carrier.
    Thanks...
    I am curious as to how these spider gears "dont look like what you have"? based on the picture, they look identical to every other 8.8" ford spider gears I have seen and replaced.

    Screen Shot 2019-07-21 at 9.36.37 AM.jpg
    I rebuild AOD/AODE/4R70W/4R75E Transmissions, check out my Facebook page for my latest project; https://www.facebook.com/pages/North...48414635312478

  11. #11
    Join Date
    Feb 2011
    Location
    New Jersey
    Age
    40
    Posts
    1,189
    I have a set of oem ford spider gears in my storage which i need to install on my 05 crown vic will check out the part # and get back to you either later today or tomorrow. It is for a 28 spline.
    My spider gears are chipped. Need to replace them soon

  12. #12
    Join Date
    Mar 2008
    Location
    Next door to my neighbor
    Age
    50
    Posts
    20,353
    Quote Originally Posted by Turbov6Bryan View Post
    why not just get 31 spline spider gears and axles and reuse the stock carrier?
    Also add the larger S spring. Easy peasy swap, I’ve done a few with cheap perfect used axles sent directly to my door.

    The plus side to this is not having to set up a new diff. With a lift you could be back on the road in thirty minutes.


    Sent from my iPhone using Tapatalk Pro
    SOLD 12/31/2021

    Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.

  13. #13
    Join Date
    Jan 2013
    Location
    Indiana
    Posts
    212
    Quote Originally Posted by crownvic05 View Post
    I have a set of oem ford spider gears in my storage which i need to install on my 05 crown vic will check out the part # and get back to you either later today or tomorrow. It is for a 28 spline.
    My spider gears are chipped. Need to replace them soon
    Ford discontinued 28 spline spider gear kits a few years ago. Even if you find the part number on your kit in storage, you wont be able to buy a new kit from Ford... unless you scour ebay and similar places for old stock being sold off. Green sales company comes to mind.
    I rebuild AOD/AODE/4R70W/4R75E Transmissions, check out my Facebook page for my latest project; https://www.facebook.com/pages/North...48414635312478

  14. #14
    Join Date
    Aug 2018
    Location
    Somersworth New Hampshire
    Posts
    105
    Quote Originally Posted by 88grandmarq View Post
    I am curious as to how these spider gears "dont look like what you have"? based on the picture, they look identical to every other 8.8" ford spider gears I have seen and replaced.

    Screen Shot 2019-07-21 at 9.36.37 AM.jpg
    Those gears are beveled on there edge. Mine are straight cut. I wish I could upload a pic but I keep getting error message.
    03 black 300A # 2827 stock setup 275,000 on car. 65,000 on engine from a 04. 03 engine died at 273,000 . Rear cat delete with magnaflow 11256 mufflers.

  15. #15
    Join Date
    Aug 2018
    Location
    Somersworth New Hampshire
    Posts
    105
    Quote Originally Posted by Turbov6Bryan View Post
    why not just get 31 spline spider gears and axles and reuse the stock carrier?
    I may just end up doing that.
    03 black 300A # 2827 stock setup 275,000 on car. 65,000 on engine from a 04. 03 engine died at 273,000 . Rear cat delete with magnaflow 11256 mufflers.

Page 1 of 4 1234 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. For Sale For sale 2004 silver maurader
    By Brett in forum Marauders for Sale
    Replies: 3
    Last Post: 07-13-2019, 06:50 PM
  2. 410 gears
    By kashvili in forum Shop Talk
    Replies: 2
    Last Post: 05-21-2004, 05:41 PM
  3. Marauder vs. Maserati Spider
    By Directedby in forum Community Discussion
    Replies: 3
    Last Post: 12-12-2002, 10:27 AM
  4. Gears
    By JFB in forum Community Discussion
    Replies: 12
    Last Post: 08-30-2002, 10:29 AM
  5. Gears.....How much?!
    By Romo53 in forum Community Discussion
    Replies: 16
    Last Post: 08-16-2002, 06:01 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •