Time for fuel upgrades since I'm gonna be getting boost! (Pics courtesy of Curless Auto Repair)
Fuel Pump.jpgFuel.jpgFresh.jpgFuel pick up.jpg
Time for fuel upgrades since I'm gonna be getting boost! (Pics courtesy of Curless Auto Repair)
Fuel Pump.jpgFuel.jpgFresh.jpgFuel pick up.jpg
Last edited by Peace2Peep; 08-25-2019 at 09:44 PM.
2003 300A
Widened Rear Wheels with 295 45 Nitto G2's
Eaton Swapped by Curless
Brake Upgrade
Mo's Tune
JLT Intake
Addco Sway Bars
ADTR Coil Over Suspension
Metco Control Arms & Watts Link
SW Headers and Exhaust
Accessories By FastBlackMerc
4.10 Gears
Aeroforce Gauges
Pantherlights Headlamps
Now Curless starts implementing heat exchanger, relocates horn, and ambient air temp sensor:
Exchanger.jpgtest fit.jpgFront end.jpgAmbient Air.jpg
2003 300A
Widened Rear Wheels with 295 45 Nitto G2's
Eaton Swapped by Curless
Brake Upgrade
Mo's Tune
JLT Intake
Addco Sway Bars
ADTR Coil Over Suspension
Metco Control Arms & Watts Link
SW Headers and Exhaust
Accessories By FastBlackMerc
4.10 Gears
Aeroforce Gauges
Pantherlights Headlamps
Oh! I almost forgot...new shocks!
https://www.facebook.com/11171534218...type=3&theater
2003 300A
Widened Rear Wheels with 295 45 Nitto G2's
Eaton Swapped by Curless
Brake Upgrade
Mo's Tune
JLT Intake
Addco Sway Bars
ADTR Coil Over Suspension
Metco Control Arms & Watts Link
SW Headers and Exhaust
Accessories By FastBlackMerc
4.10 Gears
Aeroforce Gauges
Pantherlights Headlamps
This marauder went from the grave to the showroom, great work. Love to see things like this.
That’s awesome! But you better switch his name from Bill to Chris in the first few posts..
Sent from my iPhone using Tapatalk Pro
SOLD 12/31/2021
Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.
[QUOTE=justbob;1580200]That’s awesome! But you better switch his name from Bill to Chris in the first few posts..
Woops! I guess when I think of Chris, I think of my BILLS!!! Ha!
2003 300A
Widened Rear Wheels with 295 45 Nitto G2's
Eaton Swapped by Curless
Brake Upgrade
Mo's Tune
JLT Intake
Addco Sway Bars
ADTR Coil Over Suspension
Metco Control Arms & Watts Link
SW Headers and Exhaust
Accessories By FastBlackMerc
4.10 Gears
Aeroforce Gauges
Pantherlights Headlamps
There a HUGE difference between the stock anti sway bars and the Addco units:
Attachment 50504
2003 300A
Widened Rear Wheels with 295 45 Nitto G2's
Eaton Swapped by Curless
Brake Upgrade
Mo's Tune
JLT Intake
Addco Sway Bars
ADTR Coil Over Suspension
Metco Control Arms & Watts Link
SW Headers and Exhaust
Accessories By FastBlackMerc
4.10 Gears
Aeroforce Gauges
Pantherlights Headlamps
Sway Bars Installed:
https://www.facebook.com/11171534218...type=3&theater
And New Adjustable Pedal Gears (The Curless Cure):
https://www.facebook.com/11171534218...type=3&theater
2003 300A
Widened Rear Wheels with 295 45 Nitto G2's
Eaton Swapped by Curless
Brake Upgrade
Mo's Tune
JLT Intake
Addco Sway Bars
ADTR Coil Over Suspension
Metco Control Arms & Watts Link
SW Headers and Exhaust
Accessories By FastBlackMerc
4.10 Gears
Aeroforce Gauges
Pantherlights Headlamps
Glad to hear you brought it back from the dead and got it in the right hands. I will keep praying to the Marauder Gods.
300A 8-20-02 #3849
Webasto Aftermarket Moonroof
Rear Spoiler
S55 Tail Light Treatment
5% Limo Tints
Fresh Black Paint & PVD Chrome
Stainless Works Headers & Full Cat Mandrel Exhaust System w/Magnaflow 11229 Mufflers, Martyo Tune & Coolant Mod, Steeda UDP, Stewart WP, JLT CAI & Catch Can, J-Mod, UHaul Pan, Rebuild 4R70W, Dynotech 4' 6061, Forced Lube Mod, 31 Ford Spline Axles, 31 Cobra Carrier w/CF Clutchs, Ford Racing 4.10, TA Girdle & Stud Kit, Carfixer Alignment & SPC Camber Bolts, Ridetech HQ Front Coilovers w/ADTR extended bracket & ADTR Rear HQ Shocks, Arnott P2936 A/C & A-2220 Bags, Gorilla Lock, Cooper Zeon RS3-G1 Tires, Metco Control Arms & Watts Link, Addco F/R Sway Bars, SS Brake Lines, AutoMeter Digital Oil & Volt Gauge, Full VLED Interior/Exterior, Alpine ILX-507, PKG-M780 Headrest Monitors, MRP-F300, R-S65C.2 & R-S68 Speakers, HCE-C1100 & KTX-C10LP Camera System, Viper DS4 & DSM550 GPS SmartStart System, Yellow Optima, BIG III & 200 Amps Alt
congrats!
Bill is a hell of a guy too!!!!
Those were the days.........
DANG THEY'RE CUTE!!!!!!
Smile and Nod
I love THIS bar
2003 300A
Widened Rear Wheels with 295 45 Nitto G2's
Eaton Swapped by Curless
Brake Upgrade
Mo's Tune
JLT Intake
Addco Sway Bars
ADTR Coil Over Suspension
Metco Control Arms & Watts Link
SW Headers and Exhaust
Accessories By FastBlackMerc
4.10 Gears
Aeroforce Gauges
Pantherlights Headlamps
Ok, to continue my Marauder addiction, i just ordered some OEM body pieces. We are planning on a complete paint job with Jet Black paint and a few beautiful coats of clear...some wet sanding and major beautification.
As my painter/body shop looked over the car, there was not one body panel that didn't need work. I figured since the fenders were cheap, I'd save the labor hours and pick them up. The roof is soo soo bad. So i ordered a new roof skin (not easy to locate or replace, but better than the alternative) and a new hood (the one that is on it now is a rusty aftermarket one). I also grabbed some factory headlights from Ebay and I'm planning for the whole of August without my beast! I'm also going for the S55 tail light treatment.
I'm still looking for a factory front grille...but will settle for aftermarket if it can't be found reasonably.
We're gonna get her right!
IMG_0498.jpg
2003 300A
Widened Rear Wheels with 295 45 Nitto G2's
Eaton Swapped by Curless
Brake Upgrade
Mo's Tune
JLT Intake
Addco Sway Bars
ADTR Coil Over Suspension
Metco Control Arms & Watts Link
SW Headers and Exhaust
Accessories By FastBlackMerc
4.10 Gears
Aeroforce Gauges
Pantherlights Headlamps
Just seeing this thread as I've been MIA for awhile, but very cool to see the transformation
What's the update on boost? Eaton swap? Vortech? What are your plans?
Very cool
2003 Trilogy Supercharged Marauder
1 of 170 '04 SB w/sunroof, light flint int.
MOD HISTORY:
-Lidio's Xcal2 flash, JLT CAI
-Trilogized June/08 (mostly installed by RC_Signals)
13.2@103 on stock (balding) tires.
-Added: SW Long tube Headers + High Flow Cats
-New BFGs (Best Baby Shower gift EVER!)
12.81@107.78 Oct 02/09
-Ventilated Block Mod
Out of commission
-Rebuilt with:
Teksid block/ForgedInternals/Melling oil pump/Canton windage tray/Rebuilt heads with SVT Cobra cams/Cloyes gears/ SVT Lightning MAF/Accufab TB/ MuscleMerc rear head cooling kit/ Steigy lightly ported and polished Eaton 112-
-Widened rims
XCal 4 Remote-tuned to PERFECTION by Jeff @ MartyO June/19
There are currently 1 users browsing this thread. (0 members and 1 guests)