Page 8 of 9 FirstFirst 123456789 LastLast
Results 106 to 120 of 127

Thread: Long Distance Marauder Ressurrection

  1. #106
    Join Date
    Jun 2008
    Location
    Waukesha, WI
    Posts
    1,289
    Quote Originally Posted by musclemerc View Post
    Where is the 2nd breather? Are you counting the inlet duct as a breather?

    Allowing oil blow by and dirty steam into the air inlet will only contaminate everything downstream.
    TB, SC rotor pack, intercooler, and a puddle of oil left to pool in the bottom of the lower intake.

    All waiting to get burned in the combustion chamber.
    Yes, it's an assumption.
    You "feel" the difference because you want to "feel" the difference. Since you just spent money on the upgrade you "have" to feel the difference

    I'm looking to eliminate the double pump process I have to follow right now to get the pedal hard

    2004 300A Procharger #0010 D1X
    2003 300A Procharger #0017 D1SC (SOLD. Last I heard, it was in Washington State)

  2. #107
    Join Date
    Feb 2007
    Location
    Daytona Beach
    Posts
    727
    Quote Originally Posted by musclemerc View Post
    Where is the 2nd breather? Are you counting the inlet duct as a breather?

    Allowing oil blow by and dirty steam into the air inlet will only contaminate everything downstream.
    TB, SC rotor pack, intercooler, and a puddle of oil left to pool in the bottom of the lower intake.

    All waiting to get burned in the combustion chamber.
    Good catch guys! I'm actually looking into the PCV oil catch system plan! Haven't smelled anything, but I don't really want to either...and I DON'T want anything blowing into my blower....wait...that didn't sound right....Ha!
    2003 300A
    Widened Rear Wheels with 295 45 Nitto G2's
    Eaton Swapped by Curless
    Brake Upgrade
    Mo's Tune
    JLT Intake
    Addco Sway Bars
    ADTR Coil Over Suspension
    Metco Control Arms & Watts Link
    SW Headers and Exhaust
    Accessories By FastBlackMerc
    4.10 Gears
    Aeroforce Gauges
    Pantherlights Headlamps

  3. #108
    Join Date
    Feb 2007
    Location
    Daytona Beach
    Posts
    727
    Dropped my baby off at Presidential Detailing in Tampa for a bit of paint correction and some ceramic coating on the body, wheels, and glass.

    Side Shot.jpg. Detailing Marauder.jpg
    2003 300A
    Widened Rear Wheels with 295 45 Nitto G2's
    Eaton Swapped by Curless
    Brake Upgrade
    Mo's Tune
    JLT Intake
    Addco Sway Bars
    ADTR Coil Over Suspension
    Metco Control Arms & Watts Link
    SW Headers and Exhaust
    Accessories By FastBlackMerc
    4.10 Gears
    Aeroforce Gauges
    Pantherlights Headlamps

  4. #109
    Join Date
    Jan 2004
    Location
    Somewhere in the N.C. Triangle
    Age
    65
    Posts
    26,125
    Quote Originally Posted by Peace2Peep View Post
    Good catch guys! I'm actually looking into the PCV oil catch system plan! Haven't smelled anything, but I don't really want to either...and I DON'T want anything blowing into my blower....wait...that didn't sound right....Ha!
    Let me know if you need some help acquiring or installing it.

    My setup:

    DSCN0444.jpg
    “When you can’t make them see the light, make them feel the heat.”
    Ronald Regan

    "The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
    is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."

    Lt. Colonel Ralph Peters

    “Be polite, be professional, but have a plan to kill everybody you meet.”
    "I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
    General James Mattis




  5. #110
    Join Date
    Jul 2004
    Location
    The Dirty South
    Age
    50
    Posts
    3,786
    Quote Originally Posted by fastblackmerc View Post
    Let me know if you need some help acquiring or installing it.

    My setup:

    DSCN0444.jpg
    You realize Draft42 designs no longer makes catch cans?

    I wonder why they stopped production?

  6. #111
    Join Date
    Jan 2004
    Location
    Somewhere in the N.C. Triangle
    Age
    65
    Posts
    26,125
    Quote Originally Posted by musclemerc View Post
    You realize Draft42 designs no longer makes catch cans?

    I wonder why they stopped production?
    I found some.
    “When you can’t make them see the light, make them feel the heat.”
    Ronald Regan

    "The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
    is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."

    Lt. Colonel Ralph Peters

    “Be polite, be professional, but have a plan to kill everybody you meet.”
    "I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
    General James Mattis




  7. #112
    Join Date
    Jan 2004
    Location
    Somewhere in the N.C. Triangle
    Age
    65
    Posts
    26,125
    Quote Originally Posted by musclemerc View Post
    You realize Draft42 designs no longer makes catch cans?

    I wonder why they stopped production?
    I found some.
    “When you can’t make them see the light, make them feel the heat.”
    Ronald Regan

    "The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
    is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."

    Lt. Colonel Ralph Peters

    “Be polite, be professional, but have a plan to kill everybody you meet.”
    "I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
    General James Mattis




  8. #113
    Join Date
    Jun 2012
    Location
    Grand Rapids
    Posts
    3,817
    This car has a catch can plumbed in on the driver's side. It's a Mighty Mouse can with the pcv valve in the can. The factory PCV is gutted. I've done 4 cars exactly like this including my own. Copied the setup from a Cobra Mustang.
    #2941 300A
    4.10's, carbon clutches
    Marty O Tune
    Curless Cure
    Widened Wheels
    Dead Pedal
    Eaton Swapped

    Bar tender and maker of:
    Christmas in a cup
    The "Bucket of South Haven Iced Tea"
    One Legged Lesbian Kickboxer
    Cocka Two

  9. #114
    Join Date
    Jan 2004
    Location
    Somewhere in the N.C. Triangle
    Age
    65
    Posts
    26,125
    Quote Originally Posted by Curless View Post
    This car has a catch can plumbed in on the driver's side. It's a Mighty Mouse can with the pcv valve in the can. The factory PCV is gutted. I've done 4 cars exactly like this including my own. Copied the setup from a Cobra Mustang.
    Good to know. I thought I remember seeing one.
    “When you can’t make them see the light, make them feel the heat.”
    Ronald Regan

    "The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
    is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."

    Lt. Colonel Ralph Peters

    “Be polite, be professional, but have a plan to kill everybody you meet.”
    "I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
    General James Mattis




  10. #115
    Join Date
    Oct 2005
    Location
    Southwest Florida, Lee County
    Age
    52
    Posts
    3,278
    Allen my friend - I AM JEALOUS!!!!!
    '04 Silver Marauder w/ sunroof - HID lighting, JL Audio / Eclipse DVD/NAV/iPod/camera, 4.10's, 2" drop, Progard Bumper Baffle, Delete tips, Billet Pedals, BC4E dead pedal, Lidio Tune, Mach1 chin spoiler, K&N CAI, TCE SS lines, Super40's, tinted tails, SS Inserts, Heinous Control Arms, Real oil gauge, Steeda UDP, lighted door handles. Just about ready for EATON SWAP!

    2004 Mercury Marauder
    Born March 2004, adopted October 2005. Sold January 2012, adopted AGAIN January 2016
    2,187 of 3,214
    997 in Silver Birch
    448 with light flint interior
    304 with heated seats
    336 with sunroof

  11. #116
    Join Date
    Jul 2004
    Location
    The Dirty South
    Age
    50
    Posts
    3,786
    Quote Originally Posted by fastblackmerc View Post
    Let me know if you need some help acquiring or installing it.

    My setup:

    DSCN0444.jpg
    Quote Originally Posted by fastblackmerc View Post
    I found some.
    Quote Originally Posted by fastblackmerc View Post
    I found some.
    I like how you made it blend into the existing AC system. At first glance it resembles a drier canister.

    Stealth for sure.

  12. #117
    Join Date
    Feb 2007
    Location
    Daytona Beach
    Posts
    727
    Quote Originally Posted by fastblackmerc View Post
    Good to know. I thought I remember seeing one.
    Man, I love how you're always ready to help! Love ya dawg!
    2003 300A
    Widened Rear Wheels with 295 45 Nitto G2's
    Eaton Swapped by Curless
    Brake Upgrade
    Mo's Tune
    JLT Intake
    Addco Sway Bars
    ADTR Coil Over Suspension
    Metco Control Arms & Watts Link
    SW Headers and Exhaust
    Accessories By FastBlackMerc
    4.10 Gears
    Aeroforce Gauges
    Pantherlights Headlamps

  13. #118
    Join Date
    Feb 2007
    Location
    Daytona Beach
    Posts
    727
    Quote Originally Posted by BAD MERC View Post
    Allen my friend - I AM JEALOUS!!!!!
    I cannot wait for your supercharger thrash! I wanna hold the toolbox and encourage you! Love you brother!
    2003 300A
    Widened Rear Wheels with 295 45 Nitto G2's
    Eaton Swapped by Curless
    Brake Upgrade
    Mo's Tune
    JLT Intake
    Addco Sway Bars
    ADTR Coil Over Suspension
    Metco Control Arms & Watts Link
    SW Headers and Exhaust
    Accessories By FastBlackMerc
    4.10 Gears
    Aeroforce Gauges
    Pantherlights Headlamps

  14. #119
    Join Date
    Feb 2007
    Location
    Daytona Beach
    Posts
    727
    Quote Originally Posted by Curless View Post
    This car has a catch can plumbed in on the driver's side. It's a Mighty Mouse can with the pcv valve in the can. The factory PCV is gutted. I've done 4 cars exactly like this including my own. Copied the setup from a Cobra Mustang.
    Curless for the win! I'm glad i got you in my life!
    2003 300A
    Widened Rear Wheels with 295 45 Nitto G2's
    Eaton Swapped by Curless
    Brake Upgrade
    Mo's Tune
    JLT Intake
    Addco Sway Bars
    ADTR Coil Over Suspension
    Metco Control Arms & Watts Link
    SW Headers and Exhaust
    Accessories By FastBlackMerc
    4.10 Gears
    Aeroforce Gauges
    Pantherlights Headlamps

  15. #120
    Join Date
    Feb 2007
    Location
    Daytona Beach
    Posts
    727
    Did any of you guys do an independent valuation appraisal? Thinking about doing one while she's perfect so i can affirm her value for future potential issues/problems/claims.
    2003 300A
    Widened Rear Wheels with 295 45 Nitto G2's
    Eaton Swapped by Curless
    Brake Upgrade
    Mo's Tune
    JLT Intake
    Addco Sway Bars
    ADTR Coil Over Suspension
    Metco Control Arms & Watts Link
    SW Headers and Exhaust
    Accessories By FastBlackMerc
    4.10 Gears
    Aeroforce Gauges
    Pantherlights Headlamps

Page 8 of 9 FirstFirst 123456789 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Thinking about switching long distance?
    By BruteForce in forum The Lounge
    Replies: 4
    Last Post: 07-06-2007, 08:52 AM
  2. Long Distance towing fees?
    By Breadfan in forum The Lounge
    Replies: 8
    Last Post: 05-10-2007, 11:01 AM
  3. Earth to Reality... Japan's calling long distance
    By Mad4Macs in forum The Lounge
    Replies: 11
    Last Post: 04-27-2007, 05:11 PM
  4. Favorite Long Distance Food(s)
    By pantheroc in forum The Lounge
    Replies: 34
    Last Post: 07-30-2006, 12:23 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •