Results 1 to 12 of 12

Thread: Vortech Supercharger belts shreding

  1. #1
    Join Date
    Jul 2003
    Location
    32 Granger Ave., Reading, MA 01867
    Age
    78
    Posts
    764

    Unhappy Vortech Supercharger belts shreding

    I have come again to talk to the experts.

    How can I get the correct shims installed in my car so that the belt will not get chewed up?

    My brand new 2003 MM was modified by Kenny Brown with a Vortech supercharger that worked well for several years. Then I had it upgraded with a new Ford 5.3 liter engine and new supercharger installed by Dez Racing in Massachusetts. It worked well and produced 600 RWHP. But I had to replace the supercharger belt twice in one year. Another company in my industrial park said he knew how to improve the life. (He works with a number of foreign high performance vehicles.) So I said to him to try his idea.

    So after driving the car for about a month the belt failed catastrophically (I almost lost my complete steering ability). He tried to align the pulleys and then gave up. Now my car was in a far worse condition than what I had before my new "problem solver" made his changes.

    He called Vortech and they told him that the shims, pulleys etc. are supplied by others. They only sell superchargers. My new mechanic went to one of the "other companies" who sold these parts. They told him that he had to buy a whole new supercharger to get these parts from him. I already spent about $40,000 to get the entire upgrade already with a new supercharger!

    I would go back to DEZ but there is another issue with DEZ that I will discuss later.

    I need a new performance shop to solve this problem. I live very near to the Boston area and greatly appreciate names of other competent performance shops in hopefully a 50 to 75 mile radius of Boston.

    So what to do?

    Thank you for reading my story.

    Blue Waterman
    BlueWaterMan

  2. #2
    Join Date
    Jun 2007
    Location
    Bethlehem, PA
    Age
    38
    Posts
    2,771
    Do you have a six or eight rib belt? Do you have any pictures of your set up?
    2003 DBP # 153 Whipple 3.4 in coming soon
    2004 Black Trilogy #43

  3. #3
    Join Date
    Nov 2014
    Location
    KC
    Age
    43
    Posts
    3,202
    Pictures would help us determine what is not aligned correctly. If you could show us the belt, or well, at least let us know which side of it is wearing out, it might help.
    I think imgur is a decent photo upload place, photobucket is horrible now. Good luck trying to load pictures from your home computer to this site, i tried the other day and this site is ****ed.
    The twins2.3 whipple/aluminatorVortech V-2 lots of goodies

    03 BLACK 300A
    03 BLACK 300A
    04 Supercharged SILVER BIRCH
    04 DTR
    04 Supercharged SILVER BIRCH
    04 SILVER BIRCH
    03 C.V. Sport SILVER FROST
    04 Supercharged DTR
    Joe's Wrecked DTR rebuild thread

  4. #4
    Join Date
    Feb 2003
    Location
    Earth
    Posts
    8,371
    Blog Entries
    1
    It's imperative that all the old belt debris be removed. It is not soluble. It must be removed by hand from all the pulleys, etc.

    Inspect all that the belt contacts to make certain any parts are not jamming under load.

    It takes a patient tech to get the belt aligned.
    1/4 Mile Time 11.542 @ 121.19 MPH
    195,000 Miles & 275+ Runs Down the 1,320
    541.57 RWHP & 476.64 RWTQ on DynoJet
    Tuned by Aric at Injected Engineering
    Vortech Super Charger V-2 T Trim, 19 PSI
    8 Rib Belt, Innovators West 10% Overdrive Dampner
    Air to Air Intercooler, Mini-race Bypass
    Ford Cobra Remanufactured Long Block
    Snow Performance Water-Methanol Injection
    Kooks Headers & X Pipe
    GT MAF, 60lb injectors, Dash 8, Aero Rails, Twin Ford GT Pumps,
    Kinsler Fuel Filter, Kenne Bell Boost-A-Pump
    Monroe Sensatrac, Metco Control Arms, Addco Rear Sway Bar
    31 Ford Spline Axles & Detroit Truetrac, 4:10 Ford Racing Gears
    Dynotech MMC Driveshaft
    A-1 Performance Trans, Forced Tailshaft Lube, Carbon Clutches
    3,500 RPM Stall Precision Industries Torque Converter
    B&M Deep Finned Trans Pan
    AeroForce Scan Gauges , Auto Meter Oil, Fuel & Boost Gauges
    Kenny Brown Dead Pedal, 35% Tint, Silver Star Head Lights
    AutoPage Alarm RS-727LCD, Boston Acoustic NX87

  5. #5
    Join Date
    Jun 2008
    Location
    Waukesha, WI
    Posts
    976
    Also double check all other pulleys and make sure they spin freely.
    You "feel" the difference because you want to "feel" the difference. Since you just spent money on the upgrade you "have" to feel the difference

    2004 300A Procharger #0010 D1SC.
    2003 300A Procharger #0017 D1SC (SOLD)

  6. #6
    Join Date
    Jul 2003
    Location
    32 Granger Ave., Reading, MA 01867
    Age
    78
    Posts
    764
    Sorry for my delay in responding.

    I still work full time at 78 yrs. and have added to my burden my brother with serious dementia.

    I will review all of the responses and then respond otherwise my car is essentially undriveable.

    Thank you for your thoughts

    Johnny BluewaterMan
    BlueWaterMan

  7. #7
    Join Date
    Jul 2003
    Location
    32 Granger Ave., Reading, MA 01867
    Age
    78
    Posts
    764
    I couldn't miss reading this simple statement of truth.

    Thank you blazen71
    BlueWaterMan

  8. #8
    Join Date
    Jun 2005
    Location
    long island ny
    Posts
    947
    i also have a vortech a v3 it ate 3 belts. most important is the shop. i found a place that specializes in fords. they had it fixed in no time. turned out the wrong sized belt was the prob. no issues since. thats one draw back to a one belt system.

  9. #9
    Join Date
    Oct 2004
    Location
    Cape Cod, MA
    Age
    62
    Posts
    2,455
    You may want to talk with DMC Racing in Halifax, Ma.
    2004 marauder black purchased new. Sold 9/16 at 297,000 miles. Still ran strong didn't burn a drop of oil.
    2003 marauder black 28,000 miles all stock. Garage Queen.
    2004 marauder red daily driver.

  10. #10
    Join Date
    Jul 2003
    Location
    32 Granger Ave., Reading, MA 01867
    Age
    78
    Posts
    764
    Burt ragio


    My brother is now stabilized as well as he can be. Now it is time to fix my car. I'll keep all of you up to date.

    Thank you for your suggestion of DMC Racing in Halifax.

    Blue Water man
    BlueWaterMan

  11. #11
    Join Date
    Aug 2011
    Location
    Wisconsin
    Posts
    3,687
    Jerry's Taxi was giving him all kinds of belt problems.

    Ended up being the tensioner was cracked on the back side so it wasn't visible and this had it off just enough to cause him big belt problems.

    Good luck with the repair!

    WLB
    BB#1) 1996 ImpalaSS - 16,500 miles - 100% stock
    ______________________________ ___________

    BB#2) 2003 Marauder (300a) - 34k miles - Daily Driver
    #2912 of 7093
    Conceived 8/6/2002
    Delivered 9/19/2002
    Adopted 8/10/2011
    Trilogy 242 - Self Installed 9/9/12 (0-60 5.5 sec)
    Pioneer 6x8 Front
    Legacy 600w 6x9 Rears
    JL 6.5 SubWoofer
    K&N CAI
    Window tint 50% rear/35% front
    FBM CHMSL with Strobe mod 7/1/12
    DR Deep Aluminum Trans Pan
    Sparta FOMOCO Racing 8.8 Girdle
    Mo's Dyno Tune
    Gorilla Nuts - The System
    Ford Racing 4.10s, 31 spline Cobra carrier & axles 7/1/12
    Powder Coat Axle Housing 7/1/12
    CME HP Rear Control Arms & Watts Link 7/1/12
    ______________________________ ________________

    Rex "SC Cheesehead" Weinbender 11-14-13
    Ed "Baaad GN" Linthicum 8-6-2014

  12. #12
    Join Date
    Jul 2003
    Location
    32 Granger Ave., Reading, MA 01867
    Age
    78
    Posts
    764
    Thank you very much for that suggestion.

    I'm piling up the suggestions from everyone.

    Bluewaterman
    BlueWaterMan

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (1 members and 1 guests)

Similar Threads

  1. d/r vortech supercharger
    By lilmarauder in forum Power Adders
    Replies: 133
    Last Post: 08-01-2016, 05:46 PM
  2. Vortech Supercharger
    By camelgrundle in forum Power Adders
    Replies: 31
    Last Post: 09-18-2012, 01:12 PM
  3. Trilogy supercharger or Vortech supercharger
    By bawazir in forum Power Adders
    Replies: 114
    Last Post: 02-13-2010, 11:13 PM
  4. Vortech supercharger problem
    By John F. Russo in forum Power Adders
    Replies: 38
    Last Post: 01-27-2008, 11:49 AM
  5. vortech supercharger
    By tmac1337 in forum Power Adders
    Replies: 6
    Last Post: 06-14-2004, 05:45 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •