Page 1 of 2 12 LastLast
Results 1 to 15 of 30

Thread: ABS Light Came on

  1. #1
    Join Date
    Jul 2010
    Location
    Crook County
    Age
    36
    Posts
    340

    ABS Light Came on

    Drove the car a bit more since I replaced the trans range sensor part # sw5214. After about a couple days no trans codes got thrown. Fast forward today my ABS light came on. Plug in the xcal4 and no codes. Hmm thats strange.. anyways my local mechanic said to bring it in and scan it on his scanner since my xcal4 won’t read it cause it’s not an obd2 code.
    Also I do have to remind you guys if it can be the battery junction fuse box messing with it ? I had mentioned in my last few posts about my battery junction box top buss bar terminal breaking off and having to solder. Anybody ever replaced their fuse box successfully on the MM ?




    Sent from my iPhone using Tapatalk
    300A 8-20-02 #3849
    Webasto Aftermarket Moonroof
    Rear Spoiler
    S55 Tail Light Treatment
    5% Limo Tints
    Fresh Black Paint & PVD Chrome

    Stainless Works Headers & Full Cat Mandrel Exhaust System w/Magnaflow 11229 Mufflers, Martyo Tune & Coolant Mod, Steeda UDP, Stewart WP, JLT CAI & Catch Can, J-Mod, UHaul Pan, Rebuild 4R70W, Dynotech 4' 6061, Forced Lube Mod, 31 Ford Spline Axles, 31 Cobra Carrier w/CF Clutchs, Ford Racing 4.10, TA Girdle & Stud Kit, Carfixer Alignment & SPC Camber Bolts, Ridetech HQ Front Coilovers w/ADTR extended bracket & ADTR Rear HQ Shocks, Arnott P2936 A/C & A-2220 Bags, Gorilla Lock, Cooper Zeon RS3-G1 Tires, Metco Control Arms & Watts Link, Addco F/R Sway Bars, SS Brake Lines, AutoMeter Digital Oil & Volt Gauge, Full VLED Interior/Exterior, Alpine ILX-507, PKG-M780 Headrest Monitors, MRP-F300, R-S65C.2 & R-S68 Speakers, HCE-C1100 & KTX-C10LP Camera System, Viper DS4 & DSM550 GPS SmartStart System, Yellow Optima, BIG III & 200 Amps Alt

  2. #2
    Join Date
    Aug 2011
    Location
    Wisconsin
    Posts
    4,338
    Check the rear wheel speed sensors, they like to back themselves out.

    WLB
    BB#1) 1996 ImpalaSS - 16,500 miles - 100% stock
    ______________________________ ___________

    BB#2) 2003 Marauder (300a) - 34k miles - Daily Driver
    #2912 of 7093
    Conceived 8/6/2002
    Delivered 9/19/2002
    Adopted 8/10/2011
    Trilogy 242 - Self Installed 9/9/12 (0-60 5.5 sec)
    Pioneer 6x8 Front
    Legacy 600w 6x9 Rears
    JL 6.5 SubWoofer
    K&N CAI
    Window tint 50% rear/35% front
    FBM CHMSL with Strobe mod 7/1/12
    DR Deep Aluminum Trans Pan
    Sparta FOMOCO Racing 8.8 Girdle
    Mo's Dyno Tune
    Gorilla Nuts - The System
    Ford Racing 4.10s, 31 spline Cobra carrier & axles 7/1/12
    Powder Coat Axle Housing 7/1/12
    CME HP Rear Control Arms & Watts Link 7/1/12
    ______________________________ ________________

    Rex "SC Cheesehead" Weinbender 11-14-13
    Ed "Baaad GN" Linthicum 8-6-2014

  3. #3
    Join Date
    Mar 2007
    Location
    Lehigh Valley, PA
    Posts
    5,956
    ABS codes are not able to be read by basic OBDII readers, your mechanic is correct. Just have him scan it and see whats up, I had to do both front wheel hubs on my 03 from the sensors going out.


    2016 Ford Mustang GT PP - Lund nGauge, BMR vertical links, MGW Shifter, BMR CB005

    2004 Mercury Marauder - Eaton M112, Billetflow 3.4, Accufab SBTB + Plenum, T-56 Magnum, 4.10s, Stainless Works LTs, 2.5" Exhaust, Borla Stingers, Ridetech Coilovers + Adj rear shocks, FX-R projectors, Wilwood 13" BNSL6 + FNSL4 BBKs, S55 Gauge Cluster
    440rwhp & 406rwtq Tuned by Adam @ Revolution Automotive
    2063/3214

    (Sold) 2003 Mercury Marauder - Stainless Works LT's, Stainless Works 2.5" Catback, JLT Intake, Mo's Xcal4 Tune
    5377/7838

    2000 BMW M5 - Evolve Intake, Evolve Alpha-N tune, Stoptech ST-40 BBK, UUC SSK, Dinan front STB, Dinan RSB

    1996 Ford Bronco - 4" lift, 35" BFG A/T's, Punisher Valve Body, MH1 Projectors

  4. #4
    Join Date
    Jul 2010
    Location
    Crook County
    Age
    36
    Posts
    340
    Thanks guys. The scanner is pointing towards the rear driver side wheel sensor.


    Sent from my iPhone using Tapatalk
    300A 8-20-02 #3849
    Webasto Aftermarket Moonroof
    Rear Spoiler
    S55 Tail Light Treatment
    5% Limo Tints
    Fresh Black Paint & PVD Chrome

    Stainless Works Headers & Full Cat Mandrel Exhaust System w/Magnaflow 11229 Mufflers, Martyo Tune & Coolant Mod, Steeda UDP, Stewart WP, JLT CAI & Catch Can, J-Mod, UHaul Pan, Rebuild 4R70W, Dynotech 4' 6061, Forced Lube Mod, 31 Ford Spline Axles, 31 Cobra Carrier w/CF Clutchs, Ford Racing 4.10, TA Girdle & Stud Kit, Carfixer Alignment & SPC Camber Bolts, Ridetech HQ Front Coilovers w/ADTR extended bracket & ADTR Rear HQ Shocks, Arnott P2936 A/C & A-2220 Bags, Gorilla Lock, Cooper Zeon RS3-G1 Tires, Metco Control Arms & Watts Link, Addco F/R Sway Bars, SS Brake Lines, AutoMeter Digital Oil & Volt Gauge, Full VLED Interior/Exterior, Alpine ILX-507, PKG-M780 Headrest Monitors, MRP-F300, R-S65C.2 & R-S68 Speakers, HCE-C1100 & KTX-C10LP Camera System, Viper DS4 & DSM550 GPS SmartStart System, Yellow Optima, BIG III & 200 Amps Alt

  5. #5
    Join Date
    Jul 2010
    Location
    Crook County
    Age
    36
    Posts
    340

    ABS Light Came on

    After looking at the car on the lift it looks like both rear abs wheel sensor are shot. Pinion seal is leaking. The axle seals look like they should be replaced also. Will get all the parts ordered today. I just can’t figure if I have to order the whole m-2410c kit again or can I just buy the axle seals separate. Any help is appreciated thanks.






    Sent from my iPhone using Tapatalk
    300A 8-20-02 #3849
    Webasto Aftermarket Moonroof
    Rear Spoiler
    S55 Tail Light Treatment
    5% Limo Tints
    Fresh Black Paint & PVD Chrome

    Stainless Works Headers & Full Cat Mandrel Exhaust System w/Magnaflow 11229 Mufflers, Martyo Tune & Coolant Mod, Steeda UDP, Stewart WP, JLT CAI & Catch Can, J-Mod, UHaul Pan, Rebuild 4R70W, Dynotech 4' 6061, Forced Lube Mod, 31 Ford Spline Axles, 31 Cobra Carrier w/CF Clutchs, Ford Racing 4.10, TA Girdle & Stud Kit, Carfixer Alignment & SPC Camber Bolts, Ridetech HQ Front Coilovers w/ADTR extended bracket & ADTR Rear HQ Shocks, Arnott P2936 A/C & A-2220 Bags, Gorilla Lock, Cooper Zeon RS3-G1 Tires, Metco Control Arms & Watts Link, Addco F/R Sway Bars, SS Brake Lines, AutoMeter Digital Oil & Volt Gauge, Full VLED Interior/Exterior, Alpine ILX-507, PKG-M780 Headrest Monitors, MRP-F300, R-S65C.2 & R-S68 Speakers, HCE-C1100 & KTX-C10LP Camera System, Viper DS4 & DSM550 GPS SmartStart System, Yellow Optima, BIG III & 200 Amps Alt

  6. #6
    Join Date
    Jul 2010
    Location
    Crook County
    Age
    36
    Posts
    340

    ABS Light Came on

    Anybody know the correct part # for the pinion flange ? My Ford dealer is giving me 2 different part #s which are

    dl3z-4851a
    4L5Z-4866-AA

    Reason why I ask because my pinion seal keeps leaking everytime I replace it. Ive replaced it 2-3 times in the past 7 years. I also have the dynotech D/S


    Sent from my iPhone using Tapatalk
    300A 8-20-02 #3849
    Webasto Aftermarket Moonroof
    Rear Spoiler
    S55 Tail Light Treatment
    5% Limo Tints
    Fresh Black Paint & PVD Chrome

    Stainless Works Headers & Full Cat Mandrel Exhaust System w/Magnaflow 11229 Mufflers, Martyo Tune & Coolant Mod, Steeda UDP, Stewart WP, JLT CAI & Catch Can, J-Mod, UHaul Pan, Rebuild 4R70W, Dynotech 4' 6061, Forced Lube Mod, 31 Ford Spline Axles, 31 Cobra Carrier w/CF Clutchs, Ford Racing 4.10, TA Girdle & Stud Kit, Carfixer Alignment & SPC Camber Bolts, Ridetech HQ Front Coilovers w/ADTR extended bracket & ADTR Rear HQ Shocks, Arnott P2936 A/C & A-2220 Bags, Gorilla Lock, Cooper Zeon RS3-G1 Tires, Metco Control Arms & Watts Link, Addco F/R Sway Bars, SS Brake Lines, AutoMeter Digital Oil & Volt Gauge, Full VLED Interior/Exterior, Alpine ILX-507, PKG-M780 Headrest Monitors, MRP-F300, R-S65C.2 & R-S68 Speakers, HCE-C1100 & KTX-C10LP Camera System, Viper DS4 & DSM550 GPS SmartStart System, Yellow Optima, BIG III & 200 Amps Alt

  7. #7
    Join Date
    Jun 2008
    Location
    Waukesha, WI
    Posts
    1,604
    I've used repair sleeves with success if you want to go that route?
    You "feel" the difference because you want to "feel" the difference. Since you just spent money on the upgrade you "have" to feel the difference

    I'm looking to eliminate the double pump process I have to follow right now to get the pedal hard

    2004 300A Procharger #0010 D1X
    2003 300A Procharger #0017 D1SC (SOLD. Last I heard, it was in Washington State)

  8. #8
    Join Date
    Jul 2010
    Location
    Crook County
    Age
    36
    Posts
    340

    ABS Light Came on

    Ok I got the right part number looks like dl3z4851a is the pinion flange. ABS sensors came in today got them both for a killer price 160 for both when retail is 135 for each. (Got a friend with a body shop that has a discount).

    Last is the axle seals and pinion seal. Which im gona order directly from Ford. Also instead of getting the M4210C Master gear kit, From what I’m told, the axle seals from Ford are better than the Ford Racing Kit. Royal Purple 75-140 gear oil and Lubelocker FLR-880 gasket is coming in tommorrow.

    Will take it straight to the man who rebuilt my rear end Hans at Deans Performance.






    Sent from my iPhone using Tapatalk
    Last edited by Chi Stallion; 09-19-2019 at 05:53 PM.
    300A 8-20-02 #3849
    Webasto Aftermarket Moonroof
    Rear Spoiler
    S55 Tail Light Treatment
    5% Limo Tints
    Fresh Black Paint & PVD Chrome

    Stainless Works Headers & Full Cat Mandrel Exhaust System w/Magnaflow 11229 Mufflers, Martyo Tune & Coolant Mod, Steeda UDP, Stewart WP, JLT CAI & Catch Can, J-Mod, UHaul Pan, Rebuild 4R70W, Dynotech 4' 6061, Forced Lube Mod, 31 Ford Spline Axles, 31 Cobra Carrier w/CF Clutchs, Ford Racing 4.10, TA Girdle & Stud Kit, Carfixer Alignment & SPC Camber Bolts, Ridetech HQ Front Coilovers w/ADTR extended bracket & ADTR Rear HQ Shocks, Arnott P2936 A/C & A-2220 Bags, Gorilla Lock, Cooper Zeon RS3-G1 Tires, Metco Control Arms & Watts Link, Addco F/R Sway Bars, SS Brake Lines, AutoMeter Digital Oil & Volt Gauge, Full VLED Interior/Exterior, Alpine ILX-507, PKG-M780 Headrest Monitors, MRP-F300, R-S65C.2 & R-S68 Speakers, HCE-C1100 & KTX-C10LP Camera System, Viper DS4 & DSM550 GPS SmartStart System, Yellow Optima, BIG III & 200 Amps Alt

  9. #9
    Join Date
    May 2009
    Location
    Moreau Island
    Posts
    12,207
    First thing I've ever seen made in Romania..... besides gymnasts.

  10. #10
    Join Date
    Mar 2008
    Location
    Next door to my neighbor
    Age
    50
    Posts
    20,353
    Quote Originally Posted by Mr. Man View Post
    First thing I've ever seen made in Romania..... besides gymnasts.
    And massage “therapist’s”..


    Sent from my iPhone using Tapatalk Pro
    SOLD 12/31/2021

    Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.

  11. #11
    Join Date
    Jul 2010
    Location
    Crook County
    Age
    36
    Posts
    340
    I hope those abs sensors don’t have any gypsy curses cause I had a gypsy curse spell put on me by my ex.
    300A 8-20-02 #3849
    Webasto Aftermarket Moonroof
    Rear Spoiler
    S55 Tail Light Treatment
    5% Limo Tints
    Fresh Black Paint & PVD Chrome

    Stainless Works Headers & Full Cat Mandrel Exhaust System w/Magnaflow 11229 Mufflers, Martyo Tune & Coolant Mod, Steeda UDP, Stewart WP, JLT CAI & Catch Can, J-Mod, UHaul Pan, Rebuild 4R70W, Dynotech 4' 6061, Forced Lube Mod, 31 Ford Spline Axles, 31 Cobra Carrier w/CF Clutchs, Ford Racing 4.10, TA Girdle & Stud Kit, Carfixer Alignment & SPC Camber Bolts, Ridetech HQ Front Coilovers w/ADTR extended bracket & ADTR Rear HQ Shocks, Arnott P2936 A/C & A-2220 Bags, Gorilla Lock, Cooper Zeon RS3-G1 Tires, Metco Control Arms & Watts Link, Addco F/R Sway Bars, SS Brake Lines, AutoMeter Digital Oil & Volt Gauge, Full VLED Interior/Exterior, Alpine ILX-507, PKG-M780 Headrest Monitors, MRP-F300, R-S65C.2 & R-S68 Speakers, HCE-C1100 & KTX-C10LP Camera System, Viper DS4 & DSM550 GPS SmartStart System, Yellow Optima, BIG III & 200 Amps Alt

  12. #12
    Join Date
    Sep 2015
    Location
    Mississippi
    Posts
    437
    Quote Originally Posted by Mr. Man View Post
    First thing I've ever seen made in Romania..... besides gymnasts.
    And AK-47’s


    Sent from my iPhone using Tapatalk

  13. #13
    Join Date
    Oct 2014
    Location
    Cunningham, Kansas
    Age
    70
    Posts
    695
    DL3Z-4851-A is the pinion flange you want. I work in the parts dept. at a Ford dealership. The "4866" is the part that connects the "4851" flange mounted to the pinion gear to the driveshaft.
    Last edited by Fastbob; 09-20-2019 at 10:16 AM.
    2004 SB #2150 of 3214 Moonroof, Heated Seats and 6 CD Changer. Non OEM Mufflers and 32,XXX miles and counting.

  14. #14
    Join Date
    Jul 2010
    Location
    Crook County
    Age
    36
    Posts
    340
    Quote Originally Posted by Fastbob View Post
    DL3Z-4851-A is the pinion flange you want. I work in the parts dept. at a Ford dealership. The "4866" is the part that connects the "4851" flange mounted to the pinion gear to the driveshaft.
    Correct the 4866 is the driveshaft flange that connects to the 4851 pinion flange. I even drove out to my local Ford dealer and harassed the parts guy which is the right part #. Luckily he was nice and printed me out a sheet




    Sent from my iPhone using Tapatalk
    300A 8-20-02 #3849
    Webasto Aftermarket Moonroof
    Rear Spoiler
    S55 Tail Light Treatment
    5% Limo Tints
    Fresh Black Paint & PVD Chrome

    Stainless Works Headers & Full Cat Mandrel Exhaust System w/Magnaflow 11229 Mufflers, Martyo Tune & Coolant Mod, Steeda UDP, Stewart WP, JLT CAI & Catch Can, J-Mod, UHaul Pan, Rebuild 4R70W, Dynotech 4' 6061, Forced Lube Mod, 31 Ford Spline Axles, 31 Cobra Carrier w/CF Clutchs, Ford Racing 4.10, TA Girdle & Stud Kit, Carfixer Alignment & SPC Camber Bolts, Ridetech HQ Front Coilovers w/ADTR extended bracket & ADTR Rear HQ Shocks, Arnott P2936 A/C & A-2220 Bags, Gorilla Lock, Cooper Zeon RS3-G1 Tires, Metco Control Arms & Watts Link, Addco F/R Sway Bars, SS Brake Lines, AutoMeter Digital Oil & Volt Gauge, Full VLED Interior/Exterior, Alpine ILX-507, PKG-M780 Headrest Monitors, MRP-F300, R-S65C.2 & R-S68 Speakers, HCE-C1100 & KTX-C10LP Camera System, Viper DS4 & DSM550 GPS SmartStart System, Yellow Optima, BIG III & 200 Amps Alt

  15. #15
    Join Date
    Jun 2007
    Location
    Whitehall, PA
    Age
    43
    Posts
    2,935
    Ford racing sells the pinion flange. Part #: M-4851-B
    2003 Black - sold, back again, and sold
    2003 DBP/DC - #153 Whipple 3.4 (permanent garage art)
    2003 DBP/LF - # 36 (Sold)
    2003 DBP/LF - # 205 (Sold)
    2004 Black - Trilogy #43
    2003 Black - shitbox

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Head light and tail light resources
    By MinnesotaMM in forum Shop Talk
    Replies: 20
    Last Post: 09-17-2012, 04:05 PM
  2. E-Brake Light coming on (not ABS light)
    By rickey1987 in forum Shop Talk
    Replies: 8
    Last Post: 12-23-2009, 10:42 AM
  3. Blinking o/d light and battery light
    By SID210SA in forum Transmissions
    Replies: 31
    Last Post: 11-26-2008, 12:19 PM
  4. Gauge light & heated seat light inop
    By airborne_mp84 in forum Shop Talk
    Replies: 18
    Last Post: 01-04-2008, 09:59 PM
  5. O/d Light Blinks, Followed By Check Engine Light
    By jerrykoziol in forum Community Discussion
    Replies: 9
    Last Post: 11-12-2006, 07:15 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •