Does anyone know how much voltage you should be getting at the fuel pump. Getting 9 volts at the pump and 12 volts at the enertia switch. What does the fuel module in the trunk do for the fuel pump?
Does anyone know how much voltage you should be getting at the fuel pump. Getting 9 volts at the pump and 12 volts at the enertia switch. What does the fuel module in the trunk do for the fuel pump?
it controls the pump voltage
at a warm stable idle it should be just over 6v
Update, After a few hundred dollars and alot of frustration, it turns out that when we removed the boost-a-pump from the equation the car started. From the wiring we ran into it seems it wasn't thought through very well. Previous owners had inserted the boost-a-pump between the enertia switch and the fuel pump driver module. Still trying to figure, if the fuel driver module controls voltage to the fuel pumps and reduces power based on pressure(resistance) at the pump, what good is a boost-a-pump which, as I understand, increases voltage to the pump. Inquring minds would like to know...
^^^ The BAP is suppose to go between the switch and the FPDM
If you Google it, there are quite a few wiring diagrams online that various people have made for BAP.
You "feel" the difference because you want to "feel" the difference. Since you just spent money on the upgrade you "have" to feel the difference
I'm looking to eliminate the double pump process I have to follow right now to get the pedal hard
2004 300A Procharger #0010 D1X
2003 300A Procharger #0017 D1SC (SOLD. Last I heard, it was in Washington State)
KB's website has a lot of info on the BAP.
1/4 Mile Time 11.542 @ 121.19 MPH
195,000 Miles & 275+ Runs Down the 1,320’
541.57 RWHP & 476.64 RWTQ on DynoJet
Tuned by Aric at Injected Engineering
Vortech Super Charger V-2 “T” Trim, 19 PSI
8 Rib Belt, Innovators West 10% Overdrive Dampner
Air to Air Intercooler, Mini-race Bypass
Ford Cobra Remanufactured Long Block
Snow Performance Water-Methanol Injection
Kooks Headers & X Pipe
GT MAF, 60lb injectors, Dash 8, Aero Rails, Twin Ford GT Pumps,
Kinsler Fuel Filter, Kenne Bell Boost-A-Pump
Monroe Sensatrac, Metco Control Arms, Addco Rear Sway Bar
31 Ford Spline Axles & Detroit Truetrac, 4:10 Ford Racing Gears
Dynotech MMC Driveshaft
A-1 Performance Trans, Forced Tailshaft Lube, Carbon Clutches
3,500 RPM Stall Precision Industries Torque Converter
B&M Deep Finned Trans Pan
AeroForce Scan Gauges , Auto Meter Oil, Fuel & Boost Gauges
Kenny Brown Dead Pedal, 35% Tint, Silver Star Head Lights
AutoPage Alarm RS-727LCD, Boston Acoustic NX87
There are currently 1 users browsing this thread. (0 members and 1 guests)