Results 1 to 11 of 11

Thread: Trunk lid liner?

  1. #1
    Join Date
    May 2009
    Location
    Moreau Island
    Posts
    11,554

    Question Trunk lid liner?

    Aside the Car Motor Sports liners for the MM I'm wondering if the 2003+ GM or CV came with a liner in a package or as an option? I looked briefly online and didn't come across anything.

  2. #2
    Join Date
    Feb 2007
    Location
    over here, with the 40's of beer.
    Age
    17
    Posts
    8,871
    Only ever saw them in a town car


    Sent from my iPhone using Tapatalk
    I LOVE Jerry's bar, it's my kinda place...........






    When you are dead, you donít know you are dead. It is difficult only for others. It is the same way when you are stupid.

    "Chuck Norris built my stock longblock. It runs on the tears of small children and makes 10,000 hp. He said it's his 'street version' "


    Trilogy # 192 / T.S. 0012

    BOOST GETS YOU FELONY STOPPED!!!





  3. #3
    Join Date
    Feb 2005
    Location
    Fort Wayne Indiana
    Age
    49
    Posts
    611
    I took a 2005 town car trunk liner and modified it to work. I posted the how to once but cannot find it now.

    Here is a picture. The grey's match.

    https://drive.google.com/file/d/0Bwg...ew?usp=sharing
    Last edited by FW_Linc/Merc; 12-03-2019 at 05:53 AM.


    89 Mark7 BB to LSC (totaled)
    91 Mark7 LSC SE (sold)
    93 Mustang Cobra (stock)
    97 Grand Cherokee Limited (V8!)
    03 Mercury Marauder
    03 Lincoln Town Car
    05 Dodge Magnum (Hemi)
    69 Impala 2dr (406 c.i)
    58 Pontiac Parisienne
    52 Ford F1 truck (302 V8 WIP)

  4. #4
    Join Date
    Jul 2014
    Location
    NY
    Posts
    1,180
    Quote Originally Posted by FW_Linc/Merc View Post
    I took a 2003 town car trunk liner and modified it to work. I posted the how to once but cannot find it now.

    Here is a picture. The grey's match.

    https://drive.google.com/file/d/0Bwg...ew?usp=sharing

    Do you recall how you did it? How did you attach the liner to the underside of the trunk lid?

  5. #5
    Join Date
    Feb 2004
    Location
    Northern Virginia
    Posts
    20,559

    Trunk lid liner?

    I installed mine back in 2005. Won it at the MV III Raffle in Detroit. As I recall, I had to drill eight (8) 1/4 inch holes on the underside of the trunk lid and use the short 1 inch push pins to hold it in place. It has been there for nearly 15 years .... no problem. The holes are 2 top, 2 bottom, and 2 on each side. I used the liner itself to template the holes and align them with the raised portions of the trunk lid. Pretty sure that I used a Center Punch to create a starter divit and then used a 1/16 inch drill bit first and enlarged the hole with a 1/8 inch bit and finally the 1/4 inch size.
    Last edited by Bluerauder; 12-03-2019 at 05:38 AM.
    Bluerauder
    '03 MM 300B
    #67 of 328
    Dark Blue Pearl with Light Flint interior(1 of 215)




    Black Pearl "Aarrrrr Type"
    '12 Taurus SHO 3.5 L Ecoboost V6 24V DOHC DI Twin Turbo
    (365 HP, 350 TQ)
    #318 of 478
    Tuxedo Black Metallic with Charcoal Black Leather interior (1 of 415)

    Member Capital Area Marauders (CAM)
    since April '04


    Bluerauder's Garage -- Pics and Other Info

    Sixteen (16) years of CAM Meets, Regional, and Marauderville MM Event History & Upcoming (in RED) Events is Here

  6. #6
    Join Date
    Nov 2006
    Location
    Milpitas, CA
    Age
    44
    Posts
    2,359
    I was at a pick n pull about a year back and there was a aero GM and its trunk lid had a form fitting liner. I removed it and saw some differences than what the whale body had so I left it behind.
    2003 Mercury Marauder 300B (Daily Driver)
    1988 LTD Crown Victoria S

  7. #7
    Join Date
    May 2009
    Location
    Moreau Island
    Posts
    11,554
    Quote Originally Posted by Bluerauder View Post
    I installed mine back in 2005. Won it at the MV III Raffle in Detroit. As I recall, I had to drill eight (8) 1/4 inch holes on the underside of the trunk lid and use the short 1 inch push pins to hold it in place. It has been there for nearly 15 years .... no problem. The holes are 2 top, 2 bottom, and 2 on each side. I used the liner itself to template the holes and align them with the raised portions of the trunk lid. Pretty sure that I used a Center Punch to create a starter divit and then used a 1/16 inch drill bit first and enlarged the hole with a 1/8 inch bit and finally the 1/4 inch size.
    Hey Charlie, nice to see your still around. IIRC your liner is a Car Motor Sports. I may end up going that route if they still make them or get a custom liner from and upholsterer. Hope to see you Carlisle 2020.

  8. #8
    Join Date
    Aug 2011
    Location
    Wisconsin
    Posts
    3,765

    WLB
    BB#1) 1996 ImpalaSS - 16,500 miles - 100% stock
    ______________________________ ___________

    BB#2) 2003 Marauder (300a) - 34k miles - Daily Driver
    #2912 of 7093
    Conceived 8/6/2002
    Delivered 9/19/2002
    Adopted 8/10/2011
    Trilogy 242 - Self Installed 9/9/12 (0-60 5.5 sec)
    Pioneer 6x8 Front
    Legacy 600w 6x9 Rears
    JL 6.5 SubWoofer
    K&N CAI
    Window tint 50% rear/35% front
    FBM CHMSL with Strobe mod 7/1/12
    DR Deep Aluminum Trans Pan
    Sparta FOMOCO Racing 8.8 Girdle
    Mo's Dyno Tune
    Gorilla Nuts - The System
    Ford Racing 4.10s, 31 spline Cobra carrier & axles 7/1/12
    Powder Coat Axle Housing 7/1/12
    CME HP Rear Control Arms & Watts Link 7/1/12
    ______________________________ ________________

    Rex "SC Cheesehead" Weinbender 11-14-13
    Ed "Baaad GN" Linthicum 8-6-2014

  9. #9
    Join Date
    Oct 2019
    Location
    Richmond,VA
    Age
    36
    Posts
    2
    Quote Originally Posted by FW_Linc/Merc View Post
    I took a 2005 town car trunk liner and modified it to work. I posted the how to once but cannot find it now.

    Here is a picture. The grey's match.

    https://drive.google.com/file/d/0Bwg...ew?usp=sharing
    I've looked at them at the junk yard and just wondered how much work it would take... Did you need to recover it or anything? I'm just bad at cutting a straight line lol

    Could be a good weekend project


    Quote Originally Posted by MyBlackBeasts View Post
    That site looks like it hasn't been updated since 2002 haha... I will message them and see

  10. #10
    Join Date
    Aug 2011
    Location
    Wisconsin
    Posts
    3,765
    Quote Originally Posted by mprssve View Post
    That site looks like it hasn't been updated since 2002 haha... I will message them and see
    I just ordered 1 for MM & 1 for my Impala. I had emails from them in less than 24 hours to confirm colors and stuff.

    Yes the website is clunky but they have been around for a long time and have been no problem to deal with when making orders.

    WLB
    BB#1) 1996 ImpalaSS - 16,500 miles - 100% stock
    ______________________________ ___________

    BB#2) 2003 Marauder (300a) - 34k miles - Daily Driver
    #2912 of 7093
    Conceived 8/6/2002
    Delivered 9/19/2002
    Adopted 8/10/2011
    Trilogy 242 - Self Installed 9/9/12 (0-60 5.5 sec)
    Pioneer 6x8 Front
    Legacy 600w 6x9 Rears
    JL 6.5 SubWoofer
    K&N CAI
    Window tint 50% rear/35% front
    FBM CHMSL with Strobe mod 7/1/12
    DR Deep Aluminum Trans Pan
    Sparta FOMOCO Racing 8.8 Girdle
    Mo's Dyno Tune
    Gorilla Nuts - The System
    Ford Racing 4.10s, 31 spline Cobra carrier & axles 7/1/12
    Powder Coat Axle Housing 7/1/12
    CME HP Rear Control Arms & Watts Link 7/1/12
    ______________________________ ________________

    Rex "SC Cheesehead" Weinbender 11-14-13
    Ed "Baaad GN" Linthicum 8-6-2014

  11. #11
    Join Date
    Oct 2019
    Location
    Richmond,VA
    Age
    36
    Posts
    2
    Quote Originally Posted by MyBlackBeasts View Post
    I just ordered 1 for MM & 1 for my Impala. I had emails from them in less than 24 hours to confirm colors and stuff.

    Yes the website is clunky but they have been around for a long time and have been no problem to deal with when making orders.
    I'm sure they are fine, just felt like a flashback to simpler times... Gonna try the junkyard route since parts are beyond cheap where I live, but ill probably order one for Christmas

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Trunk Lid Liner
    By bigdhasmoney in forum Community Discussion
    Replies: 29
    Last Post: 02-25-2013, 07:34 AM
  2. Trunk Lid Liner
    By Rocket Man in forum Community Discussion
    Replies: 1
    Last Post: 04-13-2009, 07:28 PM
  3. trunk liner
    By hmill008 in forum Shop Talk
    Replies: 3
    Last Post: 10-13-2006, 05:40 AM
  4. Trunk lid liner
    By whoskal in forum Community Discussion
    Replies: 6
    Last Post: 07-21-2006, 06:04 AM
  5. Trunk Liner...Who else got Black?
    By SergntMac in forum Community Discussion
    Replies: 9
    Last Post: 01-05-2006, 06:29 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •