Results 1 to 15 of 15

Thread: Blend Door Actuator replace now airbag light on.

  1. #1
    Join Date
    Dec 2020
    Location
    Los Angeles California
    Posts
    38

    Blend Door Actuator replace now airbag light on.

    Well, my ac is working great now. thanks to the sticky. Now These issues popped up after I connected the battery.
    1. Airbag light is on, I checked connection and it’s tight
    2. Radio turns on but no speakers
    3. Power steering feels stiff

    What can be the problem?

  2. #2
    Join Date
    Jun 2020
    Location
    New Jersey
    Age
    20
    Posts
    56
    Look up a fuse diagram and see if there’s a fuse that controls the speakers, power steering variable assist, and airbags.

  3. #3
    Join Date
    Jun 2011
    Location
    Northeast OH
    Posts
    7,999
    There is a module behind glove box for steering..ras module, which I think is for steering and airbag.. maybe it got knocked or diaconnected or a wire pinched doing blend door.
    Last edited by RubberCtyRauder; 02-07-2021 at 05:53 PM.
    2004 SB Ported Trilogy 48
    Has supporting mods and stuff
    Thanks to Marty O for his help in updating this car.

    R.I.P.
    Rex "SC Cheesehead"

  4. #4
    Join Date
    Feb 2006
    Location
    Rosemount, MN
    Age
    59
    Posts
    2,187
    My power steering was stiff, so I lubricated the U-Joint under the hood on the drivers side down by the exhaust manifold.

  5. #5
    Join Date
    Dec 2020
    Location
    Los Angeles California
    Posts
    38
    Thanks fellas, I will check all this and let you know the outcome tomorrow.

  6. #6
    Join Date
    Jun 2020
    Location
    New Jersey
    Age
    20
    Posts
    56
    Quote Originally Posted by Pantera View Post
    Thanks fellas, I will check all this and let you know the outcome tomorrow.
    Any update?

  7. #7
    Join Date
    Dec 2020
    Location
    Los Angeles California
    Posts
    38
    Just got done. checked all the above and no luck. Maybe Friday I will take it in and run a diagnostic on it.
    For some reason it feels more ballsy now. Weird.

  8. #8
    Join Date
    Nov 2014
    Location
    KC
    Age
    48
    Posts
    3,511
    Module does ras vaps.
    steering and air ride...
    check all your fuses , maybe pinched a wire putting the air bag back in
    The twins2.3 whipple/aluminatorVortech V-2 lots of goodies

    Current marauders
    04 DTR totaled JUST NOW starting to part out 7-21-2021 https://youtu.be/REUxjP1BVpg

    04 Silver Birch Dark Charcoal Hardtop Whipple Supercharger
    04 Silver Birch Dark Charcoal Hardtop V2 Supercharger
    04 Silver Birch Dark Charcoal Converted
    03 DBP Light Flint #122
    03 DBP Dark Charcoal #232
    03 Silver Birch 300b Light Flint Going to fix er up
    03 Black 300a
    04 Silver Birch Dark Charcoal moonroof in the works

    04 Heaton Swapped DTR
    Joe's Wrecked DTR rebuild thread

  9. #9
    Join Date
    Sep 2005
    Location
    APPLE VALLEY,CA
    Age
    59
    Posts
    1,366
    Check fuse 18. Can you see the temperature on your HVAC?

  10. #10
    Join Date
    Jan 2004
    Location
    Somewhere in the N.C. Triangle
    Age
    68
    Posts
    26,250
    Quote Originally Posted by BLACKMARAUDER04 View Post
    Check fuse 18. Can you see the temperature on your HVAC?
    Fuse #18? That's for the fog lights. Fuse #23 is for the EATC.

    OP, check fuse #16(15A) in the fuse box in the passenger compartment, #114(30A) in the power distribution box under the hood (behind the battery) and #115(50A) - feeds #16 inside.
    “When you can’t make them see the light, make them feel the heat.”
    Ronald Regan

    "The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
    is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."

    Lt. Colonel Ralph Peters

    “Be polite, be professional, but have a plan to kill everybody you meet.”
    "I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
    General James Mattis




  11. #11
    Join Date
    Jan 2004
    Location
    Somewhere in the N.C. Triangle
    Age
    68
    Posts
    26,250
    Quote Originally Posted by Pantera View Post
    Well, my ac is working great now. thanks to the sticky. Now These issues popped up after I connected the battery.
    1. Airbag light is on, I checked connection and it’s tight
    2. Radio turns on but no speakers
    3. Power steering feels stiff

    What can be the problem?
    Did you take out the radio to change the blend door actuator? Check the connectors that plug into the radio. They should "click" in.

    See post #10 for power steering issue.

    Airbag, try disconnecting the battery for a few minutes. Make sure the connector to the airbag is tight and making good contact. No pinched wires.
    “When you can’t make them see the light, make them feel the heat.”
    Ronald Regan

    "The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
    is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."

    Lt. Colonel Ralph Peters

    “Be polite, be professional, but have a plan to kill everybody you meet.”
    "I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
    General James Mattis




  12. #12
    Join Date
    Sep 2005
    Location
    APPLE VALLEY,CA
    Age
    59
    Posts
    1,366
    Sorry, I meant 16. My range sensor will blow that.


    Sent from my iPhone using Tapatalk

  13. #13
    Join Date
    Dec 2020
    Location
    Los Angeles California
    Posts
    38
    The air ride on my marauder has been removed ever since I got it. Also the airbag light is on solid no intermittent blinks. But I will check more on this tomorrow before taking it in. Thanks for all the tips.

  14. #14
    Join Date
    Dec 2020
    Location
    Los Angeles California
    Posts
    38
    Oh and regarding the question on the ac, it works great. I can see the temp.

  15. #15
    Join Date
    Dec 2020
    Location
    Los Angeles California
    Posts
    38
    Finally figured it out. I feeel so dumb... There’s a plug under the right side of the glove box that connects with a gold color bolt. I loosened it when I wedged the dashboard thinking it was part of the disassembly and forgot to tighten it back up. Thanks guys for all the help. Its crazy all the problems this issue created.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. For Sale Blend Door Actuator
    By crownvic97 in forum Other Parts for Sale
    Replies: 0
    Last Post: 02-06-2019, 11:48 AM
  2. blend door actuator
    By Chayton in forum Shop Talk
    Replies: 12
    Last Post: 04-13-2017, 12:00 PM
  3. blend door actuator
    By MMARAUDER in forum Shop Talk
    Replies: 9
    Last Post: 04-07-2014, 04:27 PM
  4. Blend door actuator
    By BLACKMARAUDER04 in forum Shop Talk
    Replies: 15
    Last Post: 05-26-2013, 09:17 PM
  5. Blend Door Actuator
    By kmastl in forum Shop Talk
    Replies: 9
    Last Post: 08-27-2012, 10:17 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •