Page 2 of 2 FirstFirst 12
Results 16 to 30 of 30

Thread: Current options for new rack and pinion?

  1. #16
    Join Date
    Sep 2008
    Location
    B'lo, NY
    Age
    40
    Posts
    380
    Ha that's where I got the numbers from. In fact, I think YOU gave me that document some years ago!

    Do you happen to have that same doc for the crown vic? Would love to see if there's any number differences.
    2004 Silver Birch w/moonroof. "Isabelle"


    Eaton swapped summer/fall 2015 with all the gooddies, tune by the one-and-only Marty-O +2psi pulley, Steigemeyer stage 6 port, SWLT, custom ss exhaust, Borla ProXS, Addco sway bars, TCE s/s brake hoses, Hawk HPS pads, Zack big brak kit, J-mod, battery in trunk, full custom audio (never used, blower whine sounds better)

    To do list:
    HID headlights, LED interior/exterior, courtesy "3-flash" turn signals, widen wheels, rear deck wing, marauder stencil on cmhsl? bumper cover inserts? deck lid, steering whee, hood liner godshead, more power!

  2. #17
    Join Date
    Jun 2003
    Location
    Timbuk3, MI
    Posts
    2,441

    Post

    dmjarosz ...Do you happen to have that same doc for the crown vic? Would love to see if there's any number differences.
    The part number for the Crown Victorias is the same as that for the Grand Marquis - 3W1Z-3504-FAPRM

    As for the same doc for the crown vic ...

    Documents CROWN Victoria ««« -click-
    » Service:
    .

  3. #18
    Join Date
    May 2004
    Location
    (The other West Coast) Wyoming Michigan
    Age
    73
    Posts
    2,509
    1957 Custom 2 dr Sedan, 1979 F-series 14' U-Haul 330 XD, 1979 F150 4X4 428 PI/CJ heads/NP 435/4:11 axles-rear Det. Lkr., 1993 Grand Marquis, Y2K CVPI supercharged 5.4, 2003 MM

    The more I learn, the more I find out I don't know.

    Confusion will be my epitaph...

    Home of the Berserker Marauder, one of the ancient Norse warriors legendary for working themselves into a frenzy before a battle and fighting with reckless savagery and insane fury, held to be invulnerable...shirtless regardless of wounds...(possibly due to ingestion of psychotropic and hallucinatory drugs such as Fly Agaric Mushrooms)...

    ΓρεεκΓοδ

  4. #19
    Join Date
    Sep 2008
    Location
    B'lo, NY
    Age
    40
    Posts
    380
    Stated in the info section:
    Total Turns Lock To Lock 3

    Even though it will physically fit and will probably function properly, its not the correct Marauder lock-to-lock turns of 2.81
    I'm hunting for a true Marauder replacement, though that might be a pipe dream these days...
    2004 Silver Birch w/moonroof. "Isabelle"


    Eaton swapped summer/fall 2015 with all the gooddies, tune by the one-and-only Marty-O +2psi pulley, Steigemeyer stage 6 port, SWLT, custom ss exhaust, Borla ProXS, Addco sway bars, TCE s/s brake hoses, Hawk HPS pads, Zack big brak kit, J-mod, battery in trunk, full custom audio (never used, blower whine sounds better)

    To do list:
    HID headlights, LED interior/exterior, courtesy "3-flash" turn signals, widen wheels, rear deck wing, marauder stencil on cmhsl? bumper cover inserts? deck lid, steering whee, hood liner godshead, more power!

  5. #20
    Join Date
    May 2004
    Location
    (The other West Coast) Wyoming Michigan
    Age
    73
    Posts
    2,509
    [QUOTE Stated in the info section:
    Total Turns Lock To Lock 3
    Even though it will physically fit and will probably function properly, its not the correct Marauder lock-to-lock turns of 2.81
    I'm hunting for a true Marauder replacement, though that might be a pipe dream these days...[/QUOTE]

    Pipe dream indeed! The rack & pinion assembly application is for ONLY a 2003 or 2004 Marauder, and 2.81 is rounded off to 3. Do you seriously think you could even tell the .19 difference between the stated specs (IF the numbers were not rounded off)? On a Marauder 15" steering wheel, that is about a 2" difference on the outside diameter of the steering wheel.
    1957 Custom 2 dr Sedan, 1979 F-series 14' U-Haul 330 XD, 1979 F150 4X4 428 PI/CJ heads/NP 435/4:11 axles-rear Det. Lkr., 1993 Grand Marquis, Y2K CVPI supercharged 5.4, 2003 MM

    The more I learn, the more I find out I don't know.

    Confusion will be my epitaph...

    Home of the Berserker Marauder, one of the ancient Norse warriors legendary for working themselves into a frenzy before a battle and fighting with reckless savagery and insane fury, held to be invulnerable...shirtless regardless of wounds...(possibly due to ingestion of psychotropic and hallucinatory drugs such as Fly Agaric Mushrooms)...

    ΓρεεκΓοδ

  6. #21
    Join Date
    Aug 2011
    Location
    Wisconsin
    Posts
    4,338
    Quote Originally Posted by GreekGod View Post
    [QUOTE Stated in the info section:
    Total Turns Lock To Lock 3
    Even though it will physically fit and will probably function properly, its not the correct Marauder lock-to-lock turns of 2.81
    I'm hunting for a true Marauder replacement, though that might be a pipe dream these days...
    Pipe dream indeed! The rack & pinion assembly application is for ONLY a 2003 or 2004 Marauder, and 2.81 is rounded off to 3. Do you seriously think you could even tell the .19 difference between the stated specs (IF the numbers were not rounded off)? On a Marauder 15" steering wheel, that is about a 2" difference on the outside diameter of the steering wheel.[/QUOTE]


    Actually yes he could.

    It isn't about the lock to lock numbers, they just identify a sports steering ratio from standard.

    Putting the 3.0 in a Marauder would be liker putting a Caprice steering box in a Camaro, or a Lincoln steering box in a Mustang.

    It's all about steering response time for handling.

    WLB
    BB#1) 1996 ImpalaSS - 16,500 miles - 100% stock
    ______________________________ ___________

    BB#2) 2003 Marauder (300a) - 34k miles - Daily Driver
    #2912 of 7093
    Conceived 8/6/2002
    Delivered 9/19/2002
    Adopted 8/10/2011
    Trilogy 242 - Self Installed 9/9/12 (0-60 5.5 sec)
    Pioneer 6x8 Front
    Legacy 600w 6x9 Rears
    JL 6.5 SubWoofer
    K&N CAI
    Window tint 50% rear/35% front
    FBM CHMSL with Strobe mod 7/1/12
    DR Deep Aluminum Trans Pan
    Sparta FOMOCO Racing 8.8 Girdle
    Mo's Dyno Tune
    Gorilla Nuts - The System
    Ford Racing 4.10s, 31 spline Cobra carrier & axles 7/1/12
    Powder Coat Axle Housing 7/1/12
    CME HP Rear Control Arms & Watts Link 7/1/12
    ______________________________ ________________

    Rex "SC Cheesehead" Weinbender 11-14-13
    Ed "Baaad GN" Linthicum 8-6-2014

  7. #22
    Join Date
    May 2004
    Location
    (The other West Coast) Wyoming Michigan
    Age
    73
    Posts
    2,509
    Quote Originally Posted by MyBlackBeasts View Post
    Pipe dream indeed! The rack & pinion assembly application is for ONLY a 2003 or 2004 Marauder, and 2.81 is rounded off to 3. Do you seriously think you could even tell the .19 difference between the stated specs (IF the numbers were not rounded off)? On a Marauder 15" steering wheel, that is about a 2" difference on the outside diameter of the steering wheel.

    Actually yes he could.

    It isn't about the lock to lock numbers, they just identify a sports steering ratio from standard.

    Putting the 3.0 in a Marauder would be liker putting a Caprice steering box in a Camaro, or a Lincoln steering box in a Mustang.

    It's all about steering response time for handling.[/QUOTE]

    So, you know for a fact that they did not round off 2.81 to 3? You are saying that they are not Marauder spec. r&p's? Are you saying they are not variable ratio r&p's? He "made it" about "lock to lock" numbers. Are you aware that the Marauder has a variable "sports" steering ratio?
    1957 Custom 2 dr Sedan, 1979 F-series 14' U-Haul 330 XD, 1979 F150 4X4 428 PI/CJ heads/NP 435/4:11 axles-rear Det. Lkr., 1993 Grand Marquis, Y2K CVPI supercharged 5.4, 2003 MM

    The more I learn, the more I find out I don't know.

    Confusion will be my epitaph...

    Home of the Berserker Marauder, one of the ancient Norse warriors legendary for working themselves into a frenzy before a battle and fighting with reckless savagery and insane fury, held to be invulnerable...shirtless regardless of wounds...(possibly due to ingestion of psychotropic and hallucinatory drugs such as Fly Agaric Mushrooms)...

    ΓρεεκΓοδ

  8. #23
    Join Date
    Aug 2011
    Location
    Wisconsin
    Posts
    4,338
    Quote Originally Posted by GreekGod View Post
    Actually yes he could.

    It isn't about the lock to lock numbers, they just identify a sports steering ratio from standard.

    Putting the 3.0 in a Marauder would be liker putting a Caprice steering box in a Camaro, or a Lincoln steering box in a Mustang.

    It's all about steering response time for handling.
    So, you know for a fact that they did not round off 2.81 to 3? You are saying that they are not Marauder spec. r&p's? Are you saying they are not variable ratio r&p's? He "made it" about "lock to lock" numbers. Are you aware that the Marauder has a variable "sports" steering ratio?[/QUOTE]

    No, I've never researched i. but when it comes to auto parts they would never round off a number combined with FOMOCO having different part numbers for them would lead me to believe they are different. I know driving my MM the steering is much more responsive than a GM.

    WLB
    BB#1) 1996 ImpalaSS - 16,500 miles - 100% stock
    ______________________________ ___________

    BB#2) 2003 Marauder (300a) - 34k miles - Daily Driver
    #2912 of 7093
    Conceived 8/6/2002
    Delivered 9/19/2002
    Adopted 8/10/2011
    Trilogy 242 - Self Installed 9/9/12 (0-60 5.5 sec)
    Pioneer 6x8 Front
    Legacy 600w 6x9 Rears
    JL 6.5 SubWoofer
    K&N CAI
    Window tint 50% rear/35% front
    FBM CHMSL with Strobe mod 7/1/12
    DR Deep Aluminum Trans Pan
    Sparta FOMOCO Racing 8.8 Girdle
    Mo's Dyno Tune
    Gorilla Nuts - The System
    Ford Racing 4.10s, 31 spline Cobra carrier & axles 7/1/12
    Powder Coat Axle Housing 7/1/12
    CME HP Rear Control Arms & Watts Link 7/1/12
    ______________________________ ________________

    Rex "SC Cheesehead" Weinbender 11-14-13
    Ed "Baaad GN" Linthicum 8-6-2014

  9. #24
    Join Date
    Jan 2003
    Location
    Near Knoxville TN
    Age
    67
    Posts
    10,717
    The Marauder R&P is different from the CV/GM part. I ordered one at O'Reilley and it works perfect. BTW, mine wasn't worn out, the housing broke when the car slipped off a jack. Yes, I was improperly jacking the car at the crossmember and the jack was too close to the edge. Slipped off and PS fluid went everywhere. They accepted the broken one for the core charge, too.
    Last edited by FordNut; 06-27-2020 at 06:51 PM. Reason: typo
    Thanks to Darrin @ BC Automotive:
    $1800 and it was worse than when he started!

    Brian (FordNut) FPG # 1458 of 7838
    03 MM 300A (Lotsa mods, 130k mi) was 303rwhp/318rwtq N/A
    then 476/410 D1SC ProCharged on stock block
    then 660/555 D1SC PC on 5.3 wet sleeved Teksid alum big bore stroker
    then 365/369 N/A on 5.3 wet sleeved Teksid alum big bore stroker
    Now 751/617 3.4L Whipple on 5.3 Boss5.0 iron big bore stroker

    03 MM 300B Silver (Mostly stock, originally wife's car, 370k mi) FPG # 7053 of 7838 or 49 of 417 SB
    03 MM 300B Silver, Stock, wife's next one, 136k mi FPG # 7134 of 7838 or 89 of 417 SB
    04 MM Silver, Stock, on standby 85k mi, FPG # 1212 of 3214 or 432 of 997 SB
    01 F150 longbed
    01 F150 shortbed
    00 F150 4x4 stepside
    01 F150 4x4 7700
    68 Stang FB (70 351C 4V, 4 wheel discs, project car)

    Mods listed here (some items not current): FordNut's Mods

  10. #25
    Join Date
    Sep 2008
    Location
    B'lo, NY
    Age
    40
    Posts
    380
    I'm positive they didn't round off. While I don't know exactly, mine is between 2-3/4 and 2-7/8 turns. If you put a small piece of tape at 12-o'clock while at one extreme, you can easily differentiate in 1/8 turn increments. I did the same in two friends' GM and CV and both are exactly 3 turns.

    Ha, not meaning to muddy the waters even more but I found a "limousine package" application for a steering rack but could not find any specifics on what Ford included in that package. My gut hunch would be different variable assist configuration and possibly longer rack travel to help with turning radius on a longer vehicle? I really have no clue but hey, there are no bad ideas in brainstorming!

    I believe the "variable sports steering ratio" you are referring to is the EVO (electronic variable orifice) that, when commanded open, allows steering fluid to bypass the steering gear, providing the driver with lower steering assist as highway speeds. I thiiink the valve itself is also specific to the Marauder as well and I know its not sold as a separate part. God forbid mine ever goes bad and i have to custom manufacture custom one...

    I've also yet to hear back from Rack Doctor and I will try again. I told them about the different ratios and EVO valving and asked if they will rebuild my own rack so i know I'm getting the same internals back.
    2004 Silver Birch w/moonroof. "Isabelle"


    Eaton swapped summer/fall 2015 with all the gooddies, tune by the one-and-only Marty-O +2psi pulley, Steigemeyer stage 6 port, SWLT, custom ss exhaust, Borla ProXS, Addco sway bars, TCE s/s brake hoses, Hawk HPS pads, Zack big brak kit, J-mod, battery in trunk, full custom audio (never used, blower whine sounds better)

    To do list:
    HID headlights, LED interior/exterior, courtesy "3-flash" turn signals, widen wheels, rear deck wing, marauder stencil on cmhsl? bumper cover inserts? deck lid, steering whee, hood liner godshead, more power!

  11. #26
    Join Date
    Mar 2007
    Location
    Lehigh Valley, PA
    Posts
    5,956
    Quote Originally Posted by dmjarosz View Post
    I'm positive they didn't round off. While I don't know exactly, mine is between 2-3/4 and 2-7/8 turns. If you put a small piece of tape at 12-o'clock while at one extreme, you can easily differentiate in 1/8 turn increments. I did the same in two friends' GM and CV and both are exactly 3 turns.

    Ha, not meaning to muddy the waters even more but I found a "limousine package" application for a steering rack but could not find any specifics on what Ford included in that package. My gut hunch would be different variable assist configuration and possibly longer rack travel to help with turning radius on a longer vehicle? I really have no clue but hey, there are no bad ideas in brainstorming!

    I believe the "variable sports steering ratio" you are referring to is the EVO (electronic variable orifice) that, when commanded open, allows steering fluid to bypass the steering gear, providing the driver with lower steering assist as highway speeds. I thiiink the valve itself is also specific to the Marauder as well and I know its not sold as a separate part. God forbid mine ever goes bad and i have to custom manufacture custom one...

    I've also yet to hear back from Rack Doctor and I will try again. I told them about the different ratios and EVO valving and asked if they will rebuild my own rack so i know I'm getting the same internals back.
    Long long ago I had read a post (probably on MotorCityMarauders) about Steve Babcock talking about using a "limo" steering rack (he may have even said gear if this was on the original prototype) to test a quicker ratio steering setup, but decided not to go with it because they were afraid of old people over-inputting and spinning out.

    I was always under the assumption the only difference between a CV and MM rack was the level of variable assist. If you end up proving otherwise that the Marauder does indeed have a slightly quicker (although IMO still not quite quick enough) rack ratio, that'd be quite a find so many years after these cars were made.


    2016 Ford Mustang GT PP - Lund nGauge, BMR vertical links, MGW Shifter, BMR CB005

    2004 Mercury Marauder - Eaton M112, Billetflow 3.4, Accufab SBTB + Plenum, T-56 Magnum, 4.10s, Stainless Works LTs, 2.5" Exhaust, Borla Stingers, Ridetech Coilovers + Adj rear shocks, FX-R projectors, Wilwood 13" BNSL6 + FNSL4 BBKs, S55 Gauge Cluster
    440rwhp & 406rwtq Tuned by Adam @ Revolution Automotive
    2063/3214

    (Sold) 2003 Mercury Marauder - Stainless Works LT's, Stainless Works 2.5" Catback, JLT Intake, Mo's Xcal4 Tune
    5377/7838

    2000 BMW M5 - Evolve Intake, Evolve Alpha-N tune, Stoptech ST-40 BBK, UUC SSK, Dinan front STB, Dinan RSB

    1996 Ford Bronco - 4" lift, 35" BFG A/T's, Punisher Valve Body, MH1 Projectors

  12. #27
    Join Date
    Sep 2005
    Location
    APPLE VALLEY,CA
    Age
    59
    Posts
    1,366
    I purchase a rebuilt unit for my Black from a guy in Florida off of car-parts.com with lifetime warranty.
    Used his rack and replaced everything else with the stuff from my car.
    Still no problem after 2 years.


    Sent from my iPhone using Tapatalk

  13. #28
    Join Date
    Jun 2006
    Location
    Central New Jersey
    Posts
    629
    Quote Originally Posted by dmjarosz View Post
    Thanks! I definitely checked out that site. I emailed them with a few questions including asking about the marauder-specific EVO valve and the 2.81 lock to lock ratio. I Will share answer when they arrive.
    I was wondering how this has worked out for you or anyone else. The rack and pinion is now leaking on my car.
    2004 Silver Birch
    Build Date 3/19/04
    Adopted on 10/19/07
    Seq#2102 of 3214
    #681 of 997 SBs
    #154 of 336 SBs with the moonroof
    Thanks Brian
    Member of The 100K Club 11/20/11
    Options-
    moonroof-heated seats-6-disc changer-trunk organizer-rear spoiler-mercury all weather mats
    Mods-Extras-Bling-
    Action Automotive-SS Inserts
    Auto Meter 4327 Oil Pressure Gauge
    Badgeless Grille(Thanks 03 Merc)
    Big Mike's Performance-"Sto n Sho" License Plate Holder
    Dead Pedal(Thanks lji372)
    Curless's Pedal Gear Repair
    Cruzer's-Arm Rest
    EATC Ungrade(Thanks JACook)
    Escape/Audiophile Radio Upgrade(Thanks shodude)
    Ford Racing M-7195-AOD Aluminum Trans Pan
    Innovative Interceptors-God's Head Valve Stem Covers
    J-Mod Valve Body
    K&N Performance Intake Kit{CAI}
    LCM Upgrade(Thanks Fastblackmerc)
    Marty-O Fender Badges, Tune & 4:10s
    Panther Lights HID Headlights
    Pro-gard Skid Plate
    Rear Cooling Head Mod
    Visteon Sirius Satellite Radio Setup(Thanks RoyLita)
    Weather Tech-Side Window Deflectors

  14. #29
    Join Date
    Sep 2005
    Location
    APPLE VALLEY,CA
    Age
    59
    Posts
    1,366
    Still working perfectly!


    Sent from my iPhone using Tapatalk

  15. #30
    Join Date
    Sep 2005
    Location
    APPLE VALLEY,CA
    Age
    59
    Posts
    1,366
    I was told the electrical connection is different in the Marauder then the GM or CV.


    Sent from my iPhone using Tapatalk

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 7
    Last Post: 01-05-2023, 07:57 PM
  2. Rack and Pinion leaking
    By dankwun in forum Shop Talk
    Replies: 16
    Last Post: 12-14-2012, 11:26 AM
  3. rack and pinion
    By jvillerauder in forum Shop Talk
    Replies: 4
    Last Post: 04-13-2009, 01:54 PM
  4. Rack & Pinion DOA
    By N40GL in forum Shop Talk
    Replies: 5
    Last Post: 02-15-2008, 07:44 PM
  5. Replies: 4
    Last Post: 10-07-2003, 06:59 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •