Page 1 of 2 12 LastLast
Results 1 to 15 of 19

Thread: Eaton Swap complete! Thanks to Marty and Crew!

  1. #1
    Join Date
    Mar 2013
    Location
    Southwest Florida
    Age
    60
    Posts
    1,524

    Eaton Swap complete! Thanks to Marty and Crew!

    Eaton Swap is complete!! Thanks to Marty and his crew at Mo's Speed Shop for piecing back together my Marauder after car hack Jeff Arthur @ MSR FLorida had the car for an Eaton Swap. I started a thread about this here:
    https://www.mercurymarauder.net/foru...-Marauder-back

    While the car was there, a few other things were fixed, so the car runs and drives great! Smooth and powerful. It will definitely take some getting used to, but that is a good thing! I received the car yesterday via carrier. Unfortunately, I was never able to get to the shop to pick up the car and meet Marty & Jeff, get a Mo's tour and, of course, do a celebratory Marauder Eaton Swap burnout while departing Mo's do to all this crazy Chinese Corona Virus going on.

    "RescuRauder", Born on 09/02/2003 & rescued on 04/05/2013. #236 of 3214 and #62 of 1237 in Black. CAI, Some kind of tune, Kooks Headers, X-pipe w/Hi-Flow cats, Magnaflow mufflers, Resonators removed, 4.10's, Metco U&L CA and Watts link, Drilled & slotted rotors, now BOOSTED!! Eaton Swapped 12/29/19!!
    Sold! 1986 Mustang GT Vert, Black, 5spd, new short block, Powerheads, Crower 15511, gears, exhaust etc.

    1968 Ford (Galaxie) XL fastback, 390, factory buckets & auto on floor
    2011 Shelby GT500, Kona Blue with SVT Performance Pkg & Navigation, VMP tuned ~550rwhp/550rwtq. Finally Blown!

  2. #2
    Join Date
    Jun 2008
    Location
    Waukesha, WI
    Posts
    1,604
    Congrats! What were the power numbers?
    You "feel" the difference because you want to "feel" the difference. Since you just spent money on the upgrade you "have" to feel the difference

    I'm looking to eliminate the double pump process I have to follow right now to get the pedal hard

    2004 300A Procharger #0010 D1X
    2003 300A Procharger #0017 D1SC (SOLD. Last I heard, it was in Washington State)

  3. #3
    Join Date
    Mar 2013
    Location
    Southwest Florida
    Age
    60
    Posts
    1,524
    Oops, yeah, they were 436hp and 449tq.

    "RescuRauder", Born on 09/02/2003 & rescued on 04/05/2013. #236 of 3214 and #62 of 1237 in Black. CAI, Some kind of tune, Kooks Headers, X-pipe w/Hi-Flow cats, Magnaflow mufflers, Resonators removed, 4.10's, Metco U&L CA and Watts link, Drilled & slotted rotors, now BOOSTED!! Eaton Swapped 12/29/19!!
    Sold! 1986 Mustang GT Vert, Black, 5spd, new short block, Powerheads, Crower 15511, gears, exhaust etc.

    1968 Ford (Galaxie) XL fastback, 390, factory buckets & auto on floor
    2011 Shelby GT500, Kona Blue with SVT Performance Pkg & Navigation, VMP tuned ~550rwhp/550rwtq. Finally Blown!

  4. #4
    Join Date
    Sep 2013
    Location
    ST Louis
    Age
    38
    Posts
    1,466
    Congrats!!!!!

    Sent from my SM-G950U using Tapatalk

    Build# 1979/3214
    Year 2004
    300B
    Ext. DTR
    Int. Dark Char
    FINALLY BOOSTED!!!

  5. #5
    Join Date
    Oct 2010
    Location
    Michigan
    Posts
    1,911
    Congrats!
    2004 Black Marauder: #2237 Born on 4/1/2004

    Eaton Swapped and a bunch of other goodies!

  6. #6
    Join Date
    Mar 2008
    Location
    Next door to my neighbor
    Age
    50
    Posts
    20,353
    Congrats man!! Sounds like she was in limp mode with boost to push her a little.

    Now go and enjoy it!


    Sent from my iPhone using Tapatalk Pro
    SOLD 12/31/2021

    Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.

  7. #7
    Join Date
    May 2009
    Location
    Moreau Island
    Posts
    12,207

  8. #8
    Join Date
    Feb 2007
    Location
    Winston Salem, NC
    Posts
    775
    Yes!!!! Enjoy yer ride baby!!
    2003 300A
    Widened Rear Wheels with 295 45 Nitto G2's
    Eaton Swapped by Curless
    Brake Upgrade
    Mo's Tune
    JLT Intake
    Addco Sway Bars
    ADTR Coil Over Suspension
    Metco Control Arms & Watts Link
    SW Headers and Exhaust
    Accessories By FastBlackMerc
    4.10 Gears
    Aeroforce Gauges
    Pantherlights Headlamps

  9. #9
    Join Date
    Apr 2010
    Location
    South Florida
    Age
    34
    Posts
    1,870
    I went to that MSR shop recently, He has parts on top of parts on top of cars, yeah...Not letting Him touch My ride. I did get some bracket parts and somethings for a Vortec Swap, He was very nice and reasonable with Me. The place is very messy. But He does have tons of mustang stuff and Eaton swap parts.


    Sent from my iPhone using Tapatalk Pro

  10. #10
    Join Date
    Jan 2003
    Location
    Hiram, Georgia
    Age
    61
    Posts
    17,780
    Glad we got to be part of the process!

    I only wish we had gotten involved sooner but sometimes this happens. Right Lowndex?

  11. #11
    Join Date
    Jun 2008
    Location
    Medford, NJ.
    Age
    77
    Posts
    1,116
    Have fun, enjoy your new power.

  12. #12
    Join Date
    Sep 2006
    Location
    Psych ward
    Age
    53
    Posts
    1,081
    Boost is always nice...…….welcome to the club..
    • 82 GT coyote swap started
    • 03 300a Marauder, stroked,cammed,T/S Trilogy Supercharged # 216,Best Et 10.77@129.72 on slicks, 93 pump gas. driven to the track.
    • 2011 GT 500, 3.4 whipple,93 pump gas,10.47@133,Driven to the track.
    • 2003 azura blue Mach 1, cobra motor,2.9 Whipple,crusher inlet,built 4r70w trans,04 IRS rear.full weight street car, Corn Fed

  13. #13
    Join Date
    Jul 2014
    Location
    NY
    Posts
    1,391
    Congratulations! That's the best mod for the MM! Wicked awesome numbers!

  14. #14
    Join Date
    Oct 2004
    Location
    Cape Cod, MA
    Age
    67
    Posts
    2,601
    I have never heard of any member not being satisfied with Martys skill set.
    Good to hear you are now up and running.
    2004 marauder black purchased new. Sold 9/16 at 297,000 miles. Still ran strong didn't burn a drop of oil.
    2003 marauder black 28,000 miles all stock. Garage Queen.
    2004 marauder red daily driver.

  15. #15
    Join Date
    Jan 2006
    Location
    Northern California
    Posts
    2,373
    Quote Originally Posted by martyo View Post
    Glad we got to be part of the process!

    I only wish we had gotten involved sooner but sometimes this happens. Right Lowndex?
    Yes, ole wise one, you are correct.

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Complete eaton swap!!!!
    By MOTOWN in forum The Lounge
    Replies: 6
    Last Post: 03-07-2013, 09:01 PM
  2. For Sale Complete Eaton Swap $2900 with all the little bits
    By Chris C. in forum Other Parts for Sale
    Replies: 108
    Last Post: 10-14-2012, 08:48 AM
  3. For Sale Complete Eaton Swap!
    By blkZooM in forum Marauder-specific Parts for Sale
    Replies: 8
    Last Post: 03-20-2012, 08:21 AM
  4. For Sale Complete Eaton Swap
    By Zack in forum Marauder-specific Parts for Sale
    Replies: 39
    Last Post: 08-19-2010, 05:52 AM
  5. For Sale Complete Eaton Swap
    By tjl006 in forum Marauder-specific Parts for Sale
    Replies: 43
    Last Post: 06-29-2010, 07:20 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •