Results 1 to 9 of 9

Thread: Custom Crossover Tube

  1. #1
    Join Date
    Jun 2008
    Location
    Waukesha, WI
    Posts
    1,604

    Custom Crossover Tube

    This might be the best one yet. I see a group buy in the near future!

    Attachment 50833
    You "feel" the difference because you want to "feel" the difference. Since you just spent money on the upgrade you "have" to feel the difference

    I'm looking to eliminate the double pump process I have to follow right now to get the pedal hard

    2004 300A Procharger #0010 D1X
    2003 300A Procharger #0017 D1SC (SOLD. Last I heard, it was in Washington State)

  2. #2
    Join Date
    Aug 2011
    Location
    Wisconsin
    Posts
    4,338
    Quote Originally Posted by blazen71 View Post
    This might be the best one yet. I see a group buy in the near future!

    Attachment 50833
    Hahahahahhahahaaa!!!!!!!!!!!!! !!

    WLB
    BB#1) 1996 ImpalaSS - 16,500 miles - 100% stock
    ______________________________ ___________

    BB#2) 2003 Marauder (300a) - 34k miles - Daily Driver
    #2912 of 7093
    Conceived 8/6/2002
    Delivered 9/19/2002
    Adopted 8/10/2011
    Trilogy 242 - Self Installed 9/9/12 (0-60 5.5 sec)
    Pioneer 6x8 Front
    Legacy 600w 6x9 Rears
    JL 6.5 SubWoofer
    K&N CAI
    Window tint 50% rear/35% front
    FBM CHMSL with Strobe mod 7/1/12
    DR Deep Aluminum Trans Pan
    Sparta FOMOCO Racing 8.8 Girdle
    Mo's Dyno Tune
    Gorilla Nuts - The System
    Ford Racing 4.10s, 31 spline Cobra carrier & axles 7/1/12
    Powder Coat Axle Housing 7/1/12
    CME HP Rear Control Arms & Watts Link 7/1/12
    ______________________________ ________________

    Rex "SC Cheesehead" Weinbender 11-14-13
    Ed "Baaad GN" Linthicum 8-6-2014

  3. #3
    Join Date
    Jul 2004
    Location
    The Dirty South
    Age
    52
    Posts
    3,836
    Unbelievable

  4. #4
    Join Date
    Sep 2015
    Location
    Mississippi
    Posts
    437
    It ain’t stupid if it works!!!


    Sent from my iPhone using Tapatalk

  5. #5
    Join Date
    Apr 2004
    Location
    Wisconsin
    Age
    47
    Posts
    705
    That is a beaut Clark...
    #1724 of 3214 Built 02/13/2004
    2004 Marauder black/moonroof
    SCT flip chip, 4:10's, lowered, big brake kit
    Kenwood KDC-X790 & 4 Kenwood speakers, 10" Sub
    Addco tube sway bars & performance shocks, Metco's
    Zex dry nitrous kit, Full SW Exhaust Kit, PI 3000 Stall
    5.0L Stroker assembly, Self installed!
    E.T. on drag radial tires: 12.270 @ 111.16 & 1.66 60'
    One off custom Hood all steel too.
    SOON TO BE Vortech supercharged

    Ryan Schmuki
    2003 Marauder, black with 4.10s n tune (sold)
    1968 Fairlane 347 built stroker(fast)
    1963 Galaxie 390 auto
    2010 Mercury Milan
    2019 Taurus Limited

  6. #6
    Join Date
    Jun 2009
    Location
    Warsaw, Indiana
    Posts
    321
    Quote Originally Posted by blazen71 View Post
    This might be the best one yet. I see a group buy in the near future!

    Attachment 50833
    Interesting. But how do you burp the car with that set-up?

    Sent from my SM-N950U using Tapatalk
    Ride 1: 2003 300-A MM, black (naturally), K&N cold air, Granitelli Racing coils, Kybe shocks, Autometer "real" oil pressure and voltmeter, 14 inch front rotors and stainless lines from TCE with 6-piston Wilwood calipers and Hawk HPS pads, cryo-treated slotted rear rotors with TCE stainless lines and Hawk HPS pads, tune by Lidio, LED headlamps. Coming Soon: LED foglights, 200 Amp Alternator.

    Ride 2: 2001 Kenny Brown "Panther 2" Crown Victoria, Black. K&N cold air intake to Allen Engine Development supercharger system with water-to-air intercooled Eaton MP-90 at 8 pounds. Extensive chassis bracing, Brembo 4-piston front calipers on 13 inch rotors with stainless lines. Trunk-relocated Optima Red-Top. 5000K Bi-Xenon HID's. And much, much more.

  7. #7
    Join Date
    Mar 2008
    Location
    Next door to my neighbor
    Age
    50
    Posts
    20,353
    Quote Originally Posted by SteelQualityMan View Post
    Interesting. But how do you burp the car with that set-up?

    Sent from my SM-N950U using Tapatalk
    Call a plumber? Actually don’t, I am one and I have to think to much already..


    Sent from my iPhone using Tapatalk Pro
    SOLD 12/31/2021

    Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.

  8. #8
    Join Date
    Jan 2018
    Location
    Califon NJ
    Age
    37
    Posts
    259
    Quote Originally Posted by SteelQualityMan View Post
    Interesting. But how do you burp the car with that set-up?
    Sent from my SM-N950U using Tapatalk
    Flip the car over and open the radiator drain.
    2003 300a Trilogy #? 4.10s
    2000 Excursion limited v10
    1997 F350 7.3 5spd 4x4 (service truck)
    1992 Taurus SHO vortec SC 5spd
    1971 GMC 2500 pickup
    1971 GMC 2500 suburban 4x4
    1967 Camaro (basket case)

  9. #9
    Join Date
    Sep 2008
    Location
    B'lo, NY
    Age
    40
    Posts
    380
    You can buy all of those pipe pieces in stainless. Just sayin'...
    2004 Silver Birch w/moonroof. "Isabelle"


    Eaton swapped summer/fall 2015 with all the gooddies, tune by the one-and-only Marty-O +2psi pulley, Steigemeyer stage 6 port, SWLT, custom ss exhaust, Borla ProXS, Addco sway bars, TCE s/s brake hoses, Hawk HPS pads, Zack big brak kit, J-mod, battery in trunk, full custom audio (never used, blower whine sounds better)

    To do list:
    HID headlights, LED interior/exterior, courtesy "3-flash" turn signals, widen wheels, rear deck wing, marauder stencil on cmhsl? bumper cover inserts? deck lid, steering whee, hood liner godshead, more power!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. crossover tube
    By HorneDogg in forum Shop Talk
    Replies: 5
    Last Post: 03-17-2013, 05:57 PM
  2. For Sale Crossover tube
    By RR|Suki in forum Marauder-specific Parts for Sale
    Replies: 9
    Last Post: 08-29-2010, 08:49 AM
  3. Wanted To Buy CAI and Crossover tube
    By tjl006 in forum Marauder Parts/Misc. Wanted
    Replies: 2
    Last Post: 04-26-2010, 09:59 PM
  4. Wanted To Buy Crossover tube
    By tjl006 in forum Marauder Parts/Misc. Wanted
    Replies: 9
    Last Post: 01-06-2010, 03:16 PM
  5. Crossover tube F/S
    By MO Merc in forum Marauder-specific Parts for Sale
    Replies: 4
    Last Post: 07-22-2009, 06:53 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •