For all interested I will be hitting the track tomorrow for my last runs NA.
I will provide corrected times for runs tomorrow, as well as corrected times for my previous runs with the 4r70w.
Place your bets!
For all interested I will be hitting the track tomorrow for my last runs NA.
I will provide corrected times for runs tomorrow, as well as corrected times for my previous runs with the 4r70w.
Place your bets!
2003 Marauder 300A
#2928 of 7838
Build date: 8/6/02
Ship date: 5/28/03
14.33 @ 96.82 with OLD engine
6R80 swap in progress
1968 Chevelle
NA/Pump Gas 10.4 @ 128 mph
416/4L85E LSA Supercharged build underway
Pickup 3 tenths ET.
2004 MM (Black) #112 of 3213 (SOLD)
2022 Ford Ff-150 SuperCab Iconic Silver "Powerboost"
3.35 L 4X4
-AND-
SLAYER1
formerly owned by "Impala Slayer!! 2004 SB MM
Kenne Belle 2.8 (Liquid Cooled), MMR "Boss 302" Block, L&M Engines rebuild Kooks Headers and cats, Accusump Pre-Oiler Dynamax VT mufflers, MBS 2 1/2" exhaust, 4.10's, 2800 stall, Argento 312 "Color" Powder coated wheels, Rears widened 1 1/2 "703
702 RWHP/653 RWTQ @ 21 Lbs. Boost, M/M catch can, 3 pillar gauge (Boost, Fuel, air intake and coolant temp, custom console cover, S-55 treatment etc...
I have no idea but am excited to hear how it does! Good luck.
You "feel" the difference because you want to "feel" the difference. Since you just spent money on the upgrade you "have" to feel the difference
I'm looking to eliminate the double pump process I have to follow right now to get the pedal hard
2004 300A Procharger #0010 D1X
2003 300A Procharger #0017 D1SC (SOLD. Last I heard, it was in Washington State)
Any updates from the track??
- 82 GT coyote swap started
- 03 300a Marauder, stroked,cammed,T/S Trilogy Supercharged # 216,Best Et 10.77@129.72 on slicks, 93 pump gas. driven to the track.
- 2011 GT 500, 3.4 whipple,93 pump gas,10.47@133,Driven to the track.
- 2003 azura blue Mach 1, cobra motor,2.9 Whipple,crusher inlet,built 4r70w trans,04 IRS rear.full weight street car, Corn Fed
2003 Marauder 300A
#2928 of 7838
Build date: 8/6/02
Ship date: 5/28/03
14.33 @ 96.82 with OLD engine
6R80 swap in progress
1968 Chevelle
NA/Pump Gas 10.4 @ 128 mph
416/4L85E LSA Supercharged build underway
I am DEFINITELY following this! Would be a great addition to an already awesome Eaton swapped Isabelle.
A have a few questions:
1) Why the -8AN fittings? Can you not just use the stock trans cooling system? I already have an aftermarket cooler installed to deal with increased heat from the Eaton swap. Will that be enough for the 6R80. Does the 6R80 generate any more heat than the 4R75?
2) How did you know how much to notch out of the crossmember? Your fab/welding work looks outstanding but I'm worried Id do the same and will have not notched it enough.
3) Is the MM crossmember same as CV and/or GM? I'm thinking junkyard crossmember and fab ahead of time.
4) Does anyone know the ratios for gears 1-4 on the 4R75 and 1-6 on the 6R80? I know I can look these up but if someone has them quickly on hand, I would appreciate the info. Reason I'm asking is even with the Eaton swap, I still wish the car had a little more low end grunt below 3500rpm. Right now 4:10's seem to be the solution (or more boost but that's a different animal) but Id still like to keep the highway drivability.
5) What torque converter? Kind of a loaded question right now since its application based and I need to learn my flexplate patterns, stall RPM stuff, etc before I start asking really difficult questions.
P.S. I get that life gets in the way, I STILL need to work with the Great Marty-O to finish my Eaton swap tune. Now that I have a shop to work on the car in the winter, hopefully things will go faster.
Edit: One more question:
6) The Quick 6 controller looks like an excellent solution but are there other controllers out there? $1250 is a pretty tall penny but on the other hand you do get what you pay for.
Last edited by dmjarosz; 10-03-2020 at 08:39 AM. Reason: Ask ooooone more question
2004 Silver Birch w/moonroof. "Isabelle"
Eaton swapped summer/fall 2015 with all the gooddies, tune by the one-and-only Marty-O +2psi pulley, Steigemeyer stage 6 port, SWLT, custom ss exhaust, Borla ProXS, Addco sway bars, TCE s/s brake hoses, Hawk HPS pads, Zack big brak kit, J-mod, battery in trunk, full custom audio (never used, blower whine sounds better)
To do list:
HID headlights, LED interior/exterior, courtesy "3-flash" turn signals, widen wheels, rear deck wing, marauder stencil on cmhsl? bumper cover inserts? deck lid, steering whee, hood liner godshead, more power!
You can't use a stock cooling system. The 6r80 requires a 1/2 inch or 8an line size. REQUIRED.
I eyeballed the crossmember based off of the silver bullet project pictures, then adjusted as necessary.
Yes the crown vic is the same crossmember. That's what I did.
U can easily search the 6r80 gear ratios. It's super nice to drive.
I used the complete 2012 f150, and in my opinion I would never use the f150 converter again. It is entirely too tight, I would aim for a 2015-2017 mustang converter. I'm hoping the supercharger mitigates that though with 150ish ft lbs more on tap.
Here are a couple progress pics as I slowly get it together.
Sent from my SM-G930U using Tapatalk
2003 Marauder 300A
#2928 of 7838
Build date: 8/6/02
Ship date: 5/28/03
14.33 @ 96.82 with OLD engine
6R80 swap in progress
1968 Chevelle
NA/Pump Gas 10.4 @ 128 mph
416/4L85E LSA Supercharged build underway
Awesome setup man. Keep us updated with more progress
The twins2.3 whipple/aluminatorVortech V-2 lots of goodies
Current marauders
04 DTR totaled JUST NOW starting to part out 7-21-2021 https://youtu.be/REUxjP1BVpg
04 Silver Birch Dark Charcoal Hardtop Whipple Supercharger
04 Silver Birch Dark Charcoal Hardtop V2 Supercharger
04 Silver Birch Dark Charcoal Converted
03 DBP Light Flint #122
03 DBP Dark Charcoal #232
03 Silver Birch 300b Light Flint Going to fix er up
03 Black 300a
04 Silver Birch Dark Charcoal moonroof in the works
04 Heaton Swapped DTR
Joe's Wrecked DTR rebuild thread
2003 Marauder 300A
#2928 of 7838
Build date: 8/6/02
Ship date: 5/28/03
14.33 @ 96.82 with OLD engine
6R80 swap in progress
1968 Chevelle
NA/Pump Gas 10.4 @ 128 mph
416/4L85E LSA Supercharged build underway
-----------------------------------------------------------------------------------
'04 Marauder #357 of 3213 - Built and Eaton swapped - "MERCD"
'21 F150 XLT 5.0 Sport
'18 Chevy Malibu Redline
'15 Mustang GT, performance package
'01 BMW 740i M-Sport, manual swapped
'97 Lincoln Town Car (black on black)
'10 Harley Ultra Limited
'08 Kawasaki ZX6R
'03 Grand Marquis(sold)
2003 Marauder 300A
#2928 of 7838
Build date: 8/6/02
Ship date: 5/28/03
14.33 @ 96.82 with OLD engine
6R80 swap in progress
1968 Chevelle
NA/Pump Gas 10.4 @ 128 mph
416/4L85E LSA Supercharged build underway
What is your pinion angle compared to stock? These cars with their long driveshafts will not tolerate much change at all in angles when you approach triple digits unless changes are made to the rear angle or adding a constant velocity joint at one end of the shaft.
My angle was off by ONE degree or less and smooth as silk until I hit 85/90 and with zero warning I’d warp the steel driveshaft I originally went with. The CV Aluminum replacement is so smooth that they allow for up to 8 degrees off in pinion angles.
Sent from my iPhone using Tapatalk Pro
SOLD 12/31/2021
Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.
-----------------------------------------------------------------------------------
'04 Marauder #357 of 3213 - Built and Eaton swapped - "MERCD"
'21 F150 XLT 5.0 Sport
'18 Chevy Malibu Redline
'15 Mustang GT, performance package
'01 BMW 740i M-Sport, manual swapped
'97 Lincoln Town Car (black on black)
'10 Harley Ultra Limited
'08 Kawasaki ZX6R
'03 Grand Marquis(sold)
I just subscribed to your YouTube page. Was that WOT video with the car still na? Can you make some dead stop WOT vids? That car seems to rip pretty damn good
The twins2.3 whipple/aluminatorVortech V-2 lots of goodies
Current marauders
04 DTR totaled JUST NOW starting to part out 7-21-2021 https://youtu.be/REUxjP1BVpg
04 Silver Birch Dark Charcoal Hardtop Whipple Supercharger
04 Silver Birch Dark Charcoal Hardtop V2 Supercharger
04 Silver Birch Dark Charcoal Converted
03 DBP Light Flint #122
03 DBP Dark Charcoal #232
03 Silver Birch 300b Light Flint Going to fix er up
03 Black 300a
04 Silver Birch Dark Charcoal moonroof in the works
04 Heaton Swapped DTR
Joe's Wrecked DTR rebuild thread
2003 Marauder 300A
#2928 of 7838
Build date: 8/6/02
Ship date: 5/28/03
14.33 @ 96.82 with OLD engine
6R80 swap in progress
1968 Chevelle
NA/Pump Gas 10.4 @ 128 mph
416/4L85E LSA Supercharged build underway
There are currently 1 users browsing this thread. (0 members and 1 guests)