Results 1 to 15 of 15

Thread: Wheel stud dimensions (replacement needed)

  1. #1
    Join Date
    Jun 2020
    Location
    New Jersey
    Age
    16
    Posts
    32

    Wheel stud dimensions (replacement needed)

    Hey everyone. When I pulled all the wheels off the car about a week ago I horrifyingly realized that basically every single stud had metal hair on it. Cleaned them all up and cleaned the inside of all the lugs, but one of them was actually bent. Passenger side rear wheel to be specific. Just wondering if this part works? If not, what are the dimensions? https://shop.advanceautoparts.com/p/...251/16140311-P

  2. #2
    Join Date
    Jun 2008
    Location
    Waukesha, WI
    Posts
    1,067
    Not sure on the stud you have listed. I'm assuming you have an 04. 03 and back axleshafts were notorious for bearing journal wear. The problem was corrected for 04 but i've still seen worn out 04 axleshafts. Since you have to pull the shaft to replace the studs anyway, maybe save yourself the trouble and just get new axleshafts? The new shafts will have studs.
    You "feel" the difference because you want to "feel" the difference. Since you just spent money on the upgrade you "have" to feel the difference

    I'm looking to eliminate the double pump process I have to follow right now to get the pedal hard

    2004 300A Procharger #0010 D1SC
    2003 300A Procharger #0017 D1SC (SOLD)

  3. #3
    Join Date
    Mar 2008
    Location
    Couple of car lengths ahead of you
    Age
    46
    Posts
    19,502
    I believe the thread and pitch are good, not sure on the rest.

    Also I seem to recall using the ABS sensor hole to help the stud find its hole on like a 45 degree angle then rotate the axle and it should slip right in. Of course the parking brakes need to be removed as well.




    Sent from my iPhone using Tapatalk Pro


    Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.

  4. #4
    Join Date
    Dec 2018
    Location
    LI NY
    Age
    56
    Posts
    146
    Bradin,

    Just measured one on my parts car. It is 2.25 in total length, .610 knurl. The ones you have listed are a bit shorter but should work.

    Ed

  5. #5
    Join Date
    Jun 2020
    Location
    New Jersey
    Age
    16
    Posts
    32
    Thanks all. Real hard to find an exact replacement! Way harder than I’ve ever thought it could be lol. I thought you didn’t need to remove the axle and you could do what Mr justbob said? If I need to pull the axle I’m gonna leave the bent stud in haha.

    oh wait I just realized you won’t even be able to tell it’s shorter unless the lugs are off. Guess I’ll go with that one, just waiting on confirmation on stud removal.

  6. #6
    Join Date
    Aug 2011
    Location
    Wisconsin
    Posts
    3,892

    WLB
    BB#1) 1996 ImpalaSS - 16,500 miles - 100% stock
    ______________________________ ___________

    BB#2) 2003 Marauder (300a) - 34k miles - Daily Driver
    #2912 of 7093
    Conceived 8/6/2002
    Delivered 9/19/2002
    Adopted 8/10/2011
    Trilogy 242 - Self Installed 9/9/12 (0-60 5.5 sec)
    Pioneer 6x8 Front
    Legacy 600w 6x9 Rears
    JL 6.5 SubWoofer
    K&N CAI
    Window tint 50% rear/35% front
    FBM CHMSL with Strobe mod 7/1/12
    DR Deep Aluminum Trans Pan
    Sparta FOMOCO Racing 8.8 Girdle
    Mo's Dyno Tune
    Gorilla Nuts - The System
    Ford Racing 4.10s, 31 spline Cobra carrier & axles 7/1/12
    Powder Coat Axle Housing 7/1/12
    CME HP Rear Control Arms & Watts Link 7/1/12
    ______________________________ ________________

    Rex "SC Cheesehead" Weinbender 11-14-13
    Ed "Baaad GN" Linthicum 8-6-2014

  7. #7
    Join Date
    Dec 2018
    Location
    LI NY
    Age
    56
    Posts
    146
    I knocked one out of the axle to measure for you but could not remove it even with the abs sensor out.Axle has to be removed.You may be able to sneak the shorter one in with the sensor removed just cut the old one shorter to get it out without removing the axle.Also depending on how crusty things are on your car the abs sensor may be a ***** to remove intact.

  8. #8
    Join Date
    Jun 2020
    Location
    New Jersey
    Age
    16
    Posts
    32
    Quote Originally Posted by mustangeddie View Post
    I knocked one out of the axle to measure for you but could not remove it even with the abs sensor out.Axle has to be removed.You may be able to sneak the shorter one in with the sensor removed just cut the old one shorter to get it out without removing the axle.Also depending on how crusty things are on your car the abs sensor may be a ***** to remove intact.
    Damn! Well I really appreciate you going through all of that for my dimensions. The 92-03 (besides marauder) were so easy... guess I’m leaving the bent one in. And also I am definitely going to buy a chaser for all the other threads on the car now that I know they’re a pain to replace.

  9. #9
    Join Date
    Dec 2018
    Location
    LI NY
    Age
    56
    Posts
    146
    No biggie car is sitting on jackstands with wheels off had already robbed the e brake shoes for one my other Marauders just had to remove caliper & rotor needed the abs sensor for one of the others

  10. #10
    Join Date
    Jun 2020
    Location
    New Jersey
    Age
    16
    Posts
    32
    Quote Originally Posted by mustangeddie View Post
    No biggie car is sitting on jackstands with wheels off had already robbed the e brake shoes for one my other Marauders just had to remove caliper & rotor needed the abs sensor for one of the others
    Oh sweet man. Come to think of it my handbrake doesn’t even work. Been too caught up in other broken things to look into it lmao.

  11. #11
    Join Date
    Jan 2004
    Location
    Somewhere in the N.C. Triangle
    Age
    64
    Posts
    25,911
    RockAuto has 5 or 6 listed.
    “When you can’t make them see the light, make them feel the heat.”
    Ronald Regan

    "The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
    is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."

    Lt. Colonel Ralph Peters

    “Be polite, be professional, but have a plan to kill everybody you meet.”
    "I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
    General James Mattis




  12. #12
    Join Date
    Aug 2011
    Location
    Wisconsin
    Posts
    3,892

    WLB
    BB#1) 1996 ImpalaSS - 16,500 miles - 100% stock
    ______________________________ ___________

    BB#2) 2003 Marauder (300a) - 34k miles - Daily Driver
    #2912 of 7093
    Conceived 8/6/2002
    Delivered 9/19/2002
    Adopted 8/10/2011
    Trilogy 242 - Self Installed 9/9/12 (0-60 5.5 sec)
    Pioneer 6x8 Front
    Legacy 600w 6x9 Rears
    JL 6.5 SubWoofer
    K&N CAI
    Window tint 50% rear/35% front
    FBM CHMSL with Strobe mod 7/1/12
    DR Deep Aluminum Trans Pan
    Sparta FOMOCO Racing 8.8 Girdle
    Mo's Dyno Tune
    Gorilla Nuts - The System
    Ford Racing 4.10s, 31 spline Cobra carrier & axles 7/1/12
    Powder Coat Axle Housing 7/1/12
    CME HP Rear Control Arms & Watts Link 7/1/12
    ______________________________ ________________

    Rex "SC Cheesehead" Weinbender 11-14-13
    Ed "Baaad GN" Linthicum 8-6-2014

  13. #13
    Join Date
    Jun 2020
    Location
    New Jersey
    Age
    16
    Posts
    32
    I have no oreilly’s near me sadly, only an advanced and an auto zone- so the website won’t even let me select a price lol.
    thanks for the help though guys.

  14. #14
    Join Date
    Aug 2011
    Location
    Wisconsin
    Posts
    3,892
    Quote Originally Posted by 04SilverBirch View Post
    I have no oreilly’s near me sadly, only an advanced and an auto zone- so the website won’t even let me select a price lol.
    thanks for the help though guys.
    The listing gives all the dimensions you were asking for.

    WLB
    BB#1) 1996 ImpalaSS - 16,500 miles - 100% stock
    ______________________________ ___________

    BB#2) 2003 Marauder (300a) - 34k miles - Daily Driver
    #2912 of 7093
    Conceived 8/6/2002
    Delivered 9/19/2002
    Adopted 8/10/2011
    Trilogy 242 - Self Installed 9/9/12 (0-60 5.5 sec)
    Pioneer 6x8 Front
    Legacy 600w 6x9 Rears
    JL 6.5 SubWoofer
    K&N CAI
    Window tint 50% rear/35% front
    FBM CHMSL with Strobe mod 7/1/12
    DR Deep Aluminum Trans Pan
    Sparta FOMOCO Racing 8.8 Girdle
    Mo's Dyno Tune
    Gorilla Nuts - The System
    Ford Racing 4.10s, 31 spline Cobra carrier & axles 7/1/12
    Powder Coat Axle Housing 7/1/12
    CME HP Rear Control Arms & Watts Link 7/1/12
    ______________________________ ________________

    Rex "SC Cheesehead" Weinbender 11-14-13
    Ed "Baaad GN" Linthicum 8-6-2014

  15. #15
    Join Date
    Jun 2020
    Location
    New Jersey
    Age
    16
    Posts
    32
    Quote Originally Posted by MyBlackBeasts View Post
    The listing gives all the dimensions you were asking for.
    Yup, made sure to put it into my notes. Thanks again.

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

Similar Threads

  1. Wheel Stud Replacement
    By derik in forum Shop Talk
    Replies: 12
    Last Post: 01-07-2011, 10:51 AM
  2. Exterior Dimensions Needed
    By MM2004 in forum Shop Talk
    Replies: 2
    Last Post: 12-05-2005, 10:03 AM
  3. Wheel stud problem
    By Gagfish in forum Tires & Wheels
    Replies: 18
    Last Post: 06-30-2005, 10:55 AM
  4. HELP! Wheel stud issue?
    By CRUZTAKER in forum Shop Talk
    Replies: 4
    Last Post: 06-27-2005, 10:26 AM
  5. Wheel Stud question
    By merc in forum Shop Talk
    Replies: 7
    Last Post: 05-14-2005, 08:09 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •