Results 1 to 4 of 4

Thread: Info on heads needed

  1. #1
    Join Date
    Aug 2011
    Location
    Wisconsin
    Posts
    3,892

    Info on heads needed

    Ok, I give up!

    Wasted a lot of time trying to search out threads I've read in past about the head codes used on the MM engines.

    Could someone please enlighten me as to what the codes are and what the head difference is per code? 3 spark plug threads, 6 SP threads, etc.

    Thank you very much!

    WLB
    BB#1) 1996 ImpalaSS - 16,500 miles - 100% stock
    ______________________________ ___________

    BB#2) 2003 Marauder (300a) - 34k miles - Daily Driver
    #2912 of 7093
    Conceived 8/6/2002
    Delivered 9/19/2002
    Adopted 8/10/2011
    Trilogy 242 - Self Installed 9/9/12 (0-60 5.5 sec)
    Pioneer 6x8 Front
    Legacy 600w 6x9 Rears
    JL 6.5 SubWoofer
    K&N CAI
    Window tint 50% rear/35% front
    FBM CHMSL with Strobe mod 7/1/12
    DR Deep Aluminum Trans Pan
    Sparta FOMOCO Racing 8.8 Girdle
    Mo's Dyno Tune
    Gorilla Nuts - The System
    Ford Racing 4.10s, 31 spline Cobra carrier & axles 7/1/12
    Powder Coat Axle Housing 7/1/12
    CME HP Rear Control Arms & Watts Link 7/1/12
    ______________________________ ________________

    Rex "SC Cheesehead" Weinbender 11-14-13
    Ed "Baaad GN" Linthicum 8-6-2014

  2. #2
    Join Date
    Mar 2007
    Location
    Lehigh Valley, PA
    Posts
    5,766
    This page has everything you'll never need to know about the DOHC cylinder heads

    http://www.terminator-cobra.com/castings.htm


    2016 Ford Mustang GT PP - Lund nGauge, BMR vertical links

    2004 Mercury Marauder - Eaton M112, Billetflow 3.4, Accufab SBTB + Plenum, T-56 Magnum, 4.10s, Stainless Works LTs, 2.5" Exhaust, Borla Stingers, Ridetech Coilovers + Adj rear shocks, FX-R projectors, Wilwood 13" BNSL6 + FNSL4 BBKs, S55 Gauge Cluster
    440rwhp & 406rwtq Tuned by Adam @ Revolution Automotive

    2003 Mercury Marauder - Stainless Works LT's, Stainless Works 2.5" Catback, JLT Intake, Mo's Xcal4 Tune
    5377/7839

    2000 BMW M5 - Evolve Intake, Evolve Alpha-N tune, Stoptech ST-40 BBK, UUC SSK, Dinan front STB, Dinan RSB

    1996 Ford Bronco - 4" lift, 35" BFG A/T's, Punisher Valve Body, MH1 Projectors

  3. #3
    Join Date
    Aug 2011
    Location
    Wisconsin
    Posts
    3,892
    Quote Originally Posted by offroadkarter View Post
    This page has everything you'll never need to know about the DOHC cylinder heads

    http://www.terminator-cobra.com/castings.htm
    Thank you!!!

    WLB
    BB#1) 1996 ImpalaSS - 16,500 miles - 100% stock
    ______________________________ ___________

    BB#2) 2003 Marauder (300a) - 34k miles - Daily Driver
    #2912 of 7093
    Conceived 8/6/2002
    Delivered 9/19/2002
    Adopted 8/10/2011
    Trilogy 242 - Self Installed 9/9/12 (0-60 5.5 sec)
    Pioneer 6x8 Front
    Legacy 600w 6x9 Rears
    JL 6.5 SubWoofer
    K&N CAI
    Window tint 50% rear/35% front
    FBM CHMSL with Strobe mod 7/1/12
    DR Deep Aluminum Trans Pan
    Sparta FOMOCO Racing 8.8 Girdle
    Mo's Dyno Tune
    Gorilla Nuts - The System
    Ford Racing 4.10s, 31 spline Cobra carrier & axles 7/1/12
    Powder Coat Axle Housing 7/1/12
    CME HP Rear Control Arms & Watts Link 7/1/12
    ______________________________ ________________

    Rex "SC Cheesehead" Weinbender 11-14-13
    Ed "Baaad GN" Linthicum 8-6-2014

  4. #4
    Join Date
    Jan 2003
    Location
    Burlington, KY
    Posts
    129
    Quote Originally Posted by offroadkarter View Post
    This page has everything you'll never need to know about the DOHC cylinder heads

    http://www.terminator-cobra.com/castings.htm
    Very interesting link. Thanks
    Reinhart flash, 4:10 gears, kooks headers/x-pipe, 18" magnaflow, underdrive pulleys, metco lower control arms, magnflow muffler,magnapack bullet muffler tailpipe extensions, denso plugs and thermostat.
    Dynojet 1/13/04: HP-290.5 TQ-302.8

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. DIY P-1SC Kit Info needed
    By cougar9150 in forum Power Adders
    Replies: 29
    Last Post: 03-28-2012, 09:45 AM
  2. J-mod part info needed
    By vmaxmarauder in forum Transmissions
    Replies: 0
    Last Post: 03-27-2009, 02:23 PM
  3. Gauge pod info needed
    By Spectragod in forum Community Discussion
    Replies: 10
    Last Post: 03-04-2009, 07:31 PM
  4. Rear End Info Needed
    By FordNut in forum Shop Talk
    Replies: 10
    Last Post: 01-26-2009, 03:48 PM
  5. Info & Advice needed.
    By PhastPhil in forum The Lounge
    Replies: 5
    Last Post: 08-08-2007, 07:31 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •