Page 1 of 2 12 LastLast
Results 1 to 15 of 22

Thread: Bumpers, Seats, Door Panels, Visors

  1. #1
    Join Date
    Mar 2007
    Location
    Lehigh Valley, PA
    Posts
    5,956

    Exclamation Bumpers, Seats, Door Panels, Visors

    Feel free to look thru my album for hi res photos

    https://offroadkarter.smugmug.com/Ca...arts-For-Sale/


    Bumpers Set: $900

    $500 Front bumper: solid condition, no cracks or holes. Paint has spider cracks from parking lot bumps, passenger side where it clips in behind the fender is a little wavy.

    Fog lights and wiring harnesses included





    $500 Rear bumper: has repair on inside, solid bumper otherwise. I didn't even know it had a repair until I pulled it off the car. Paint has spider webs and some scuffs, would need a buff job to look "okay" on a car, otherwise would make a great core to repaint.





    $600 (SOLD) Seats front and back, leather is in good shape, normal wear from use. All power functions work.






    Last edited by offroadkarter; 08-23-2020 at 02:37 PM.


    2016 Ford Mustang GT PP - Lund nGauge, BMR vertical links, MGW Shifter, BMR CB005

    2004 Mercury Marauder - Eaton M112, Billetflow 3.4, Accufab SBTB + Plenum, T-56 Magnum, 4.10s, Stainless Works LTs, 2.5" Exhaust, Borla Stingers, Ridetech Coilovers + Adj rear shocks, FX-R projectors, Wilwood 13" BNSL6 + FNSL4 BBKs, S55 Gauge Cluster
    440rwhp & 406rwtq Tuned by Adam @ Revolution Automotive
    2063/3214

    (Sold) 2003 Mercury Marauder - Stainless Works LT's, Stainless Works 2.5" Catback, JLT Intake, Mo's Xcal4 Tune
    5377/7838

    2000 BMW M5 - Evolve Intake, Evolve Alpha-N tune, Stoptech ST-40 BBK, UUC SSK, Dinan front STB, Dinan RSB

    1996 Ford Bronco - 4" lift, 35" BFG A/T's, Punisher Valve Body, MH1 Projectors

  2. #2
    Join Date
    Mar 2007
    Location
    Lehigh Valley, PA
    Posts
    5,956
    Door panels: $100 for all 4 (SOLD)

    Fair shape, typical door handle separating as common with higher mile cars







    Visors: $40

    Last edited by offroadkarter; 08-09-2020 at 02:07 PM.


    2016 Ford Mustang GT PP - Lund nGauge, BMR vertical links, MGW Shifter, BMR CB005

    2004 Mercury Marauder - Eaton M112, Billetflow 3.4, Accufab SBTB + Plenum, T-56 Magnum, 4.10s, Stainless Works LTs, 2.5" Exhaust, Borla Stingers, Ridetech Coilovers + Adj rear shocks, FX-R projectors, Wilwood 13" BNSL6 + FNSL4 BBKs, S55 Gauge Cluster
    440rwhp & 406rwtq Tuned by Adam @ Revolution Automotive
    2063/3214

    (Sold) 2003 Mercury Marauder - Stainless Works LT's, Stainless Works 2.5" Catback, JLT Intake, Mo's Xcal4 Tune
    5377/7838

    2000 BMW M5 - Evolve Intake, Evolve Alpha-N tune, Stoptech ST-40 BBK, UUC SSK, Dinan front STB, Dinan RSB

    1996 Ford Bronco - 4" lift, 35" BFG A/T's, Punisher Valve Body, MH1 Projectors

  3. #3
    Join Date
    Nov 2005
    Location
    Bonanza, AR
    Posts
    95
    I'd be interested in the seats, visors, and maybe the door panels if shipping is possible and feasible.

  4. #4
    Join Date
    Mar 2007
    Location
    Lehigh Valley, PA
    Posts
    5,956
    I'll also be at Carlisle if anyone wants parts delivered there


    2016 Ford Mustang GT PP - Lund nGauge, BMR vertical links, MGW Shifter, BMR CB005

    2004 Mercury Marauder - Eaton M112, Billetflow 3.4, Accufab SBTB + Plenum, T-56 Magnum, 4.10s, Stainless Works LTs, 2.5" Exhaust, Borla Stingers, Ridetech Coilovers + Adj rear shocks, FX-R projectors, Wilwood 13" BNSL6 + FNSL4 BBKs, S55 Gauge Cluster
    440rwhp & 406rwtq Tuned by Adam @ Revolution Automotive
    2063/3214

    (Sold) 2003 Mercury Marauder - Stainless Works LT's, Stainless Works 2.5" Catback, JLT Intake, Mo's Xcal4 Tune
    5377/7838

    2000 BMW M5 - Evolve Intake, Evolve Alpha-N tune, Stoptech ST-40 BBK, UUC SSK, Dinan front STB, Dinan RSB

    1996 Ford Bronco - 4" lift, 35" BFG A/T's, Punisher Valve Body, MH1 Projectors

  5. #5
    Join Date
    Feb 2007
    Location
    Winston Salem, NC
    Posts
    775
    Do you have the small triangle shaped sail panels that attach on the corder of the door panels opposite the side view mirrors?

    That's what I need...
    2003 300A
    Widened Rear Wheels with 295 45 Nitto G2's
    Eaton Swapped by Curless
    Brake Upgrade
    Mo's Tune
    JLT Intake
    Addco Sway Bars
    ADTR Coil Over Suspension
    Metco Control Arms & Watts Link
    SW Headers and Exhaust
    Accessories By FastBlackMerc
    4.10 Gears
    Aeroforce Gauges
    Pantherlights Headlamps

  6. #6
    Join Date
    Aug 2011
    Location
    Wisconsin
    Posts
    4,338
    Quote Originally Posted by Peace2Peep View Post
    Do you have the small triangle shaped sail panels that attach on the corder of the door panels opposite the side view mirrors?

    That's what I need...
    Are these what you need:
    https://www.tascaparts.com/oem-parts...Y4LWdhcw%3D%3D
    https://www.tascaparts.com/oem-parts...Y4LWdhcw%3D%3D

    WLB
    BB#1) 1996 ImpalaSS - 16,500 miles - 100% stock
    ______________________________ ___________

    BB#2) 2003 Marauder (300a) - 34k miles - Daily Driver
    #2912 of 7093
    Conceived 8/6/2002
    Delivered 9/19/2002
    Adopted 8/10/2011
    Trilogy 242 - Self Installed 9/9/12 (0-60 5.5 sec)
    Pioneer 6x8 Front
    Legacy 600w 6x9 Rears
    JL 6.5 SubWoofer
    K&N CAI
    Window tint 50% rear/35% front
    FBM CHMSL with Strobe mod 7/1/12
    DR Deep Aluminum Trans Pan
    Sparta FOMOCO Racing 8.8 Girdle
    Mo's Dyno Tune
    Gorilla Nuts - The System
    Ford Racing 4.10s, 31 spline Cobra carrier & axles 7/1/12
    Powder Coat Axle Housing 7/1/12
    CME HP Rear Control Arms & Watts Link 7/1/12
    ______________________________ ________________

    Rex "SC Cheesehead" Weinbender 11-14-13
    Ed "Baaad GN" Linthicum 8-6-2014

  7. #7
    Join Date
    Feb 2007
    Location
    Winston Salem, NC
    Posts
    775
    Heyyyyy! Yeah!!!! Thx! So much!
    2003 300A
    Widened Rear Wheels with 295 45 Nitto G2's
    Eaton Swapped by Curless
    Brake Upgrade
    Mo's Tune
    JLT Intake
    Addco Sway Bars
    ADTR Coil Over Suspension
    Metco Control Arms & Watts Link
    SW Headers and Exhaust
    Accessories By FastBlackMerc
    4.10 Gears
    Aeroforce Gauges
    Pantherlights Headlamps

  8. #8
    Join Date
    May 2003
    Location
    Waterloo, IA
    Age
    64
    Posts
    4,464
    I tried these tasca parts, only one is available, and I believe it is the drivers side. The other is no longer available.

    Just FYI

  9. #9
    Join Date
    Aug 2011
    Location
    Wisconsin
    Posts
    4,338
    Quote Originally Posted by TooManyFords View Post
    I tried these tasca parts, only one is available, and I believe it is the drivers side. The other is no longer available.

    Just FYI
    Bummer! Go to your local Ford parts dude and have them do a part number search for it. May find one elsewhere in the country. I did that for my Ranger battery tray, found 1 in PA & had it a week later.

    WLB
    BB#1) 1996 ImpalaSS - 16,500 miles - 100% stock
    ______________________________ ___________

    BB#2) 2003 Marauder (300a) - 34k miles - Daily Driver
    #2912 of 7093
    Conceived 8/6/2002
    Delivered 9/19/2002
    Adopted 8/10/2011
    Trilogy 242 - Self Installed 9/9/12 (0-60 5.5 sec)
    Pioneer 6x8 Front
    Legacy 600w 6x9 Rears
    JL 6.5 SubWoofer
    K&N CAI
    Window tint 50% rear/35% front
    FBM CHMSL with Strobe mod 7/1/12
    DR Deep Aluminum Trans Pan
    Sparta FOMOCO Racing 8.8 Girdle
    Mo's Dyno Tune
    Gorilla Nuts - The System
    Ford Racing 4.10s, 31 spline Cobra carrier & axles 7/1/12
    Powder Coat Axle Housing 7/1/12
    CME HP Rear Control Arms & Watts Link 7/1/12
    ______________________________ ________________

    Rex "SC Cheesehead" Weinbender 11-14-13
    Ed "Baaad GN" Linthicum 8-6-2014

  10. #10
    Join Date
    May 2009
    Location
    Moreau Island
    Posts
    12,207
    Do you still have the radiator plastic cover?

  11. #11
    Join Date
    Mar 2007
    Location
    Lehigh Valley, PA
    Posts
    5,956
    Quote Originally Posted by Mr. Man View Post
    Do you still have the radiator plastic cover?
    pretty sure that went with the car


    2016 Ford Mustang GT PP - Lund nGauge, BMR vertical links, MGW Shifter, BMR CB005

    2004 Mercury Marauder - Eaton M112, Billetflow 3.4, Accufab SBTB + Plenum, T-56 Magnum, 4.10s, Stainless Works LTs, 2.5" Exhaust, Borla Stingers, Ridetech Coilovers + Adj rear shocks, FX-R projectors, Wilwood 13" BNSL6 + FNSL4 BBKs, S55 Gauge Cluster
    440rwhp & 406rwtq Tuned by Adam @ Revolution Automotive
    2063/3214

    (Sold) 2003 Mercury Marauder - Stainless Works LT's, Stainless Works 2.5" Catback, JLT Intake, Mo's Xcal4 Tune
    5377/7838

    2000 BMW M5 - Evolve Intake, Evolve Alpha-N tune, Stoptech ST-40 BBK, UUC SSK, Dinan front STB, Dinan RSB

    1996 Ford Bronco - 4" lift, 35" BFG A/T's, Punisher Valve Body, MH1 Projectors

  12. #12
    Join Date
    Jul 2020
    Location
    Arlington, VA
    Age
    35
    Posts
    7
    Would you take $400 for the front bumper, picked up at Carlisle?

  13. #13
    Join Date
    Mar 2007
    Location
    Lehigh Valley, PA
    Posts
    5,956
    Quote Originally Posted by StoobyMcdooby View Post
    Would you take $400 for the front bumper, picked up at Carlisle?

    Shoot me a PM, lets talk


    2016 Ford Mustang GT PP - Lund nGauge, BMR vertical links, MGW Shifter, BMR CB005

    2004 Mercury Marauder - Eaton M112, Billetflow 3.4, Accufab SBTB + Plenum, T-56 Magnum, 4.10s, Stainless Works LTs, 2.5" Exhaust, Borla Stingers, Ridetech Coilovers + Adj rear shocks, FX-R projectors, Wilwood 13" BNSL6 + FNSL4 BBKs, S55 Gauge Cluster
    440rwhp & 406rwtq Tuned by Adam @ Revolution Automotive
    2063/3214

    (Sold) 2003 Mercury Marauder - Stainless Works LT's, Stainless Works 2.5" Catback, JLT Intake, Mo's Xcal4 Tune
    5377/7838

    2000 BMW M5 - Evolve Intake, Evolve Alpha-N tune, Stoptech ST-40 BBK, UUC SSK, Dinan front STB, Dinan RSB

    1996 Ford Bronco - 4" lift, 35" BFG A/T's, Punisher Valve Body, MH1 Projectors

  14. #14
    Join Date
    Jul 2020
    Location
    Arlington, VA
    Age
    35
    Posts
    7
    Pm sent ! Thanks for fast reply!

  15. #15
    Join Date
    May 2019
    Location
    Harrisburg, NC
    Age
    53
    Posts
    364
    What are those things attached to the back of the front seats and are you only selling the seats as a complete set?

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Wanted To Buy Pair of door Sail Panels (triangle plastic above front door panels)
    By TooManyFords in forum Marauder Parts/Misc. Wanted
    Replies: 0
    Last Post: 05-03-2020, 05:12 PM
  2. For Sale door panels
    By TMStang in forum Marauder-specific Parts for Sale
    Replies: 26
    Last Post: 05-18-2018, 05:31 AM
  3. For Sale 2003 Marauder Seats, and door Panels. (Ebay) Sherman, TX
    By NXSBOB in forum Marauder-specific Parts for Sale
    Replies: 12
    Last Post: 01-15-2013, 08:10 PM
  4. For Sale 4 door panels on sale with the key
    By bigcowl-imp in forum Marauder-specific Parts for Sale
    Replies: 12
    Last Post: 04-29-2012, 04:40 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •