Looking for complete set (Both Sides) of new in black body side impact molding.
drobin
2003 Marauder
Looking for complete set (Both Sides) of new in black body side impact molding.
drobin
2003 Marauder
03MM-300A
Build Date 6/05/02
673 of #7093 Black
PM sent about Body side Moldings.
On a similar note: where can I find the side moulding from the front fenders?
2003 300A
Widened Rear Wheels with 295 45 Nitto G2's
Eaton Swapped by Curless
Brake Upgrade
Mo's Tune
JLT Intake
Addco Sway Bars
ADTR Coil Over Suspension
Metco Control Arms & Watts Link
SW Headers and Exhaust
Accessories By FastBlackMerc
4.10 Gears
Aeroforce Gauges
Pantherlights Headlamps
They're still available from FoMoCo ...Peace2Peep - On a similar note: where can I find the side moulding from the front fenders?
.
- 5W7Z-16036-APTM - Body Side Molding (RH)
- 5W7Z-16037-APTM - Body Side Molding (LH)
*TASCAPARTS listing(s)
Thanks for the heads up, ordered complete set of moldings. Will keep everyone posted.
Thanks,
Drobin
I never put mine back on and I gave them to a buddy. I think the car looks great without them.
Sent from my iPhone using Tapatalk Pro
You definitely got me thinking, but I do like the “without” look.
Drobin
03MM-300A
Build Date 6/05/02
673 of #7093 Black
In 20+ years of owning Crown Victorias none of this has EVER happened to any I've owned, nor have I ever heard of it happening to any others (here and crownvic.net).03Merc - The paint will peel if not painted/prepped correctly, the tape doesn't stick on forever and the moldings catch wind and fly off eventually. It happens to mostly all of these cars which sucks!
(if true) Must be a S FL Marauder thang.
.
2003 300A
Widened Rear Wheels with 295 45 Nitto G2's
Eaton Swapped by Curless
Brake Upgrade
Mo's Tune
JLT Intake
Addco Sway Bars
ADTR Coil Over Suspension
Metco Control Arms & Watts Link
SW Headers and Exhaust
Accessories By FastBlackMerc
4.10 Gears
Aeroforce Gauges
Pantherlights Headlamps
I replaced mine. The fronts started coming loose. They cracked. I tried putting them back but they looked like piss.
1/4 Mile Time 11.542 @ 121.19 MPH
195,000 Miles & 275+ Runs Down the 1,320’
541.57 RWHP & 476.64 RWTQ on DynoJet
Tuned by Aric at Injected Engineering
Vortech Super Charger V-2 “T” Trim, 19 PSI
8 Rib Belt, Innovators West 10% Overdrive Dampner
Air to Air Intercooler, Mini-race Bypass
Ford Cobra Remanufactured Long Block
Snow Performance Water-Methanol Injection
Kooks Headers & X Pipe
GT MAF, 60lb injectors, Dash 8, Aero Rails, Twin Ford GT Pumps,
Kinsler Fuel Filter, Kenne Bell Boost-A-Pump
Monroe Sensatrac, Metco Control Arms, Addco Rear Sway Bar
31 Ford Spline Axles & Detroit Truetrac, 4:10 Ford Racing Gears
Dynotech MMC Driveshaft
A-1 Performance Trans, Forced Tailshaft Lube, Carbon Clutches
3,500 RPM Stall Precision Industries Torque Converter
B&M Deep Finned Trans Pan
AeroForce Scan Gauges , Auto Meter Oil, Fuel & Boost Gauges
Kenny Brown Dead Pedal, 35% Tint, Silver Star Head Lights
AutoPage Alarm RS-727LCD, Boston Acoustic NX87
Sherman’s car has them removed and in person it looked so clean without.
Sent from my iPhone using Tapatalk Pro
SOLD 12/31/2021
Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.
If you take them off NEVER NEVER ever park your car anywhere near a vehicle that may have small children as passengers.
Keep in mind that if you remove them there is a hole in the rear door skins that has to be welded up them the doors repainted.
If you’re in control, you’re not going fast enough. – Parnelli Jones
If your wife's having a good time and you're not, you're still having a better time than if you're having a good time and she's not. - Red Green
2004 Marauder 300A - Garage Queen
1025 of 3213. It is one of 1237 in black and one of 2000 w/o the moonroof option.
Performance
4:10's, rear Adco, front Eibachs w/ KYB shocks, Working oil pressure gauge, JLT CA Kit, Fumoto Oil Drain Valve, TCE SS Brake Lines, Zack big brake kit.
Dress
Power by Ford coil covers, Maruder sill plates, God's head steering wheel emblem, spoiler, front and rear splash gaurds, Custom dead pedal, LED lights for engine bay, interior and gauges. 64' Marauder Sail Panel for rear badge, custom God's head badge in grill.
LOC: Clermont Florida
There are currently 1 users browsing this thread. (0 members and 1 guests)