Page 1 of 2 12 LastLast
Results 1 to 15 of 16

Thread: Body side impact moldings (both sides)

  1. #1
    Join Date
    Aug 2002
    Location
    New Orleans, La
    Posts
    540

    Body side impact moldings (both sides)

    Looking for complete set (Both Sides) of new in black body side impact molding.
    drobin
    2003 Marauder
    03MM-300A
    Build Date 6/05/02
    673 of #7093 Black

  2. #2
    Join Date
    Jul 2014
    Location
    NY
    Posts
    1,391
    PM sent about Body side Moldings.

  3. #3
    Join Date
    Feb 2007
    Location
    Winston Salem, NC
    Posts
    775
    On a similar note: where can I find the side moulding from the front fenders?
    2003 300A
    Widened Rear Wheels with 295 45 Nitto G2's
    Eaton Swapped by Curless
    Brake Upgrade
    Mo's Tune
    JLT Intake
    Addco Sway Bars
    ADTR Coil Over Suspension
    Metco Control Arms & Watts Link
    SW Headers and Exhaust
    Accessories By FastBlackMerc
    4.10 Gears
    Aeroforce Gauges
    Pantherlights Headlamps

  4. #4
    Join Date
    Jun 2003
    Location
    Timbuk3, MI
    Posts
    2,441

    Post

    Peace2Peep - On a similar note: where can I find the side moulding from the front fenders?
    They're still available from FoMoCo ...

    .

  5. #5
    Join Date
    Aug 2002
    Location
    New Orleans, La
    Posts
    540
    Thanks for the heads up, ordered complete set of moldings. Will keep everyone posted.
    Thanks,
    Drobin

  6. #6
    Join Date
    Apr 2010
    Location
    South Florida
    Age
    34
    Posts
    1,870


    I never put mine back on and I gave them to a buddy. I think the car looks great without them.


    Sent from my iPhone using Tapatalk Pro

  7. #7
    Join Date
    Aug 2002
    Location
    New Orleans, La
    Posts
    540
    You definitely got me thinking, but I do like the “without” look.
    Drobin
    03MM-300A
    Build Date 6/05/02
    673 of #7093 Black

  8. #8
    Join Date
    Apr 2010
    Location
    South Florida
    Age
    34
    Posts
    1,870
    Quote Originally Posted by drobin View Post
    You definitely got me thinking, but I do like the “without” look.
    Drobin
    The paint will peel if not painted/prepped correctly, the tape doesn't stick on forever and the moldings catch wind and fly off eventually. It happens to mostly all of these cars which sucks!


    Sent from my iPhone using Tapatalk Pro

  9. #9
    Join Date
    Jun 2003
    Location
    Timbuk3, MI
    Posts
    2,441

    Exclamation

    03Merc - The paint will peel if not painted/prepped correctly, the tape doesn't stick on forever and the moldings catch wind and fly off eventually. It happens to mostly all of these cars which sucks!
    In 20+ years of owning Crown Victorias none of this has EVER happened to any I've owned, nor have I ever heard of it happening to any others (here and crownvic.net).

    (if true) Must be a S FL Marauder thang.
    .

  10. #10
    Join Date
    Feb 2007
    Location
    Winston Salem, NC
    Posts
    775
    Quote Originally Posted by gdmjoe View Post
    They're still available from FoMoCo ...

    .
    Thanks soo much! Ordered them! Perfect!!! I'll have a complete vehicle yet!!!
    2003 300A
    Widened Rear Wheels with 295 45 Nitto G2's
    Eaton Swapped by Curless
    Brake Upgrade
    Mo's Tune
    JLT Intake
    Addco Sway Bars
    ADTR Coil Over Suspension
    Metco Control Arms & Watts Link
    SW Headers and Exhaust
    Accessories By FastBlackMerc
    4.10 Gears
    Aeroforce Gauges
    Pantherlights Headlamps

  11. #11
    Join Date
    Apr 2010
    Location
    South Florida
    Age
    34
    Posts
    1,870
    Quote Originally Posted by gdmjoe View Post
    In 20+ years of owning Crown Victorias none of this has EVER happened to any I've owned, nor have I ever heard of it happening to any others (here and crownvic.net).

    (if true) Must be a S FL Marauder thang.
    .
    Well in a dozen years of owning and driving them everyday I've seen several of them missing on cars. Could be something to do with the South Florida humidity. Regardless, it happens. Sorry You're disappointed!


    Sent from my iPhone using Tapatalk Pro

  12. #12
    Join Date
    Feb 2003
    Location
    Earth
    Posts
    8,598
    Blog Entries
    2
    I replaced mine. The fronts started coming loose. They cracked. I tried putting them back but they looked like piss.
    1/4 Mile Time 11.542 @ 121.19 MPH
    195,000 Miles & 275+ Runs Down the 1,320’
    541.57 RWHP & 476.64 RWTQ on DynoJet
    Tuned by Aric at Injected Engineering
    Vortech Super Charger V-2 “T” Trim, 19 PSI
    8 Rib Belt, Innovators West 10% Overdrive Dampner
    Air to Air Intercooler, Mini-race Bypass
    Ford Cobra Remanufactured Long Block
    Snow Performance Water-Methanol Injection
    Kooks Headers & X Pipe
    GT MAF, 60lb injectors, Dash 8, Aero Rails, Twin Ford GT Pumps,
    Kinsler Fuel Filter, Kenne Bell Boost-A-Pump
    Monroe Sensatrac, Metco Control Arms, Addco Rear Sway Bar
    31 Ford Spline Axles & Detroit Truetrac, 4:10 Ford Racing Gears
    Dynotech MMC Driveshaft
    A-1 Performance Trans, Forced Tailshaft Lube, Carbon Clutches
    3,500 RPM Stall Precision Industries Torque Converter
    B&M Deep Finned Trans Pan
    AeroForce Scan Gauges , Auto Meter Oil, Fuel & Boost Gauges
    Kenny Brown Dead Pedal, 35% Tint, Silver Star Head Lights
    AutoPage Alarm RS-727LCD, Boston Acoustic NX87

  13. #13
    Join Date
    Mar 2008
    Location
    Next door to my neighbor
    Age
    50
    Posts
    20,353
    Sherman’s car has them removed and in person it looked so clean without.


    Sent from my iPhone using Tapatalk Pro
    SOLD 12/31/2021

    Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.

  14. #14
    Join Date
    May 2009
    Location
    Moreau Island
    Posts
    12,207
    If you take them off NEVER NEVER ever park your car anywhere near a vehicle that may have small children as passengers.

  15. #15
    Join Date
    Feb 2005
    Location
    Clermont Florida
    Age
    57
    Posts
    2,043
    Keep in mind that if you remove them there is a hole in the rear door skins that has to be welded up them the doors repainted.
    If you’re in control, you’re not going fast enough. – Parnelli Jones

    If your wife's having a good time and you're not, you're still having a better time than if you're having a good time and she's not. - Red Green

    2004 Marauder 300A - Garage Queen

    1025 of 3213. It is one of 1237 in black and one of 2000 w/o the moonroof option.

    Performance
    4:10's, rear Adco, front Eibachs w/ KYB shocks, Working oil pressure gauge, JLT CA Kit, Fumoto Oil Drain Valve, TCE SS Brake Lines, Zack big brake kit.
    Dress
    Power by Ford coil covers, Maruder sill plates, God's head steering wheel emblem, spoiler, front and rear splash gaurds, Custom dead pedal, LED lights for engine bay, interior and gauges. 64' Marauder Sail Panel for rear badge, custom God's head badge in grill.

    LOC: Clermont Florida

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Best way to remove & re-install body side moldings?
    By sflrainmaker01 in forum Shop Talk
    Replies: 5
    Last Post: 04-23-2020, 06:45 PM
  2. body side molding set?
    By chief455 in forum Community Discussion
    Replies: 6
    Last Post: 10-28-2018, 04:48 PM
  3. For Sale Moser Diff Cover, Marauder Body Moldings
    By DJD in forum Marauder-specific Parts for Sale
    Replies: 6
    Last Post: 03-30-2015, 08:15 PM
  4. Replies: 3
    Last Post: 04-29-2009, 11:40 AM
  5. No Body Side Molding?
    By Marauderoz in forum Community Discussion
    Replies: 8
    Last Post: 08-14-2007, 07:07 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •