Looking for a left (driver's side) front fender with no rust. I know - good luck with that. Are Crown Vic's and Grand Marquis's front fenders the same as the Marauder?
Looking for a left (driver's side) front fender with no rust. I know - good luck with that. Are Crown Vic's and Grand Marquis's front fenders the same as the Marauder?
WLB
BB#1) 1996 ImpalaSS - 16,500 miles - 100% stock
______________________________ ___________
BB#2) 2003 Marauder (300a) - 34k miles - Daily Driver
#2912 of 7093
Conceived 8/6/2002
Delivered 9/19/2002
Adopted 8/10/2011
Trilogy 242 - Self Installed 9/9/12 (0-60 5.5 sec)
Pioneer 6x8 Front
Legacy 600w 6x9 Rears
JL 6.5 SubWoofer
K&N CAI
Window tint 50% rear/35% front
FBM CHMSL with Strobe mod 7/1/12
DR Deep Aluminum Trans Pan
Sparta FOMOCO Racing 8.8 Girdle
Mo's Dyno Tune
Gorilla Nuts - The System
Ford Racing 4.10s, 31 spline Cobra carrier & axles 7/1/12
Powder Coat Axle Housing 7/1/12
CME HP Rear Control Arms & Watts Link 7/1/12
______________________________ ________________
Rex "SC Cheesehead" Weinbender 11-14-13
Ed "Baaad GN" Linthicum 8-6-2014
Aren't the marauder's wheel wells rolled or something like that? Heard it here on this site many years back. Means it would be different than GM, right?
2003 Mercury Marauder 300B (Daily Driver)
1988 LTD Crown Victoria S
Not sure I'm using the right term. Help me here guys.
2003 Mercury Marauder 300B (Daily Driver)
1988 LTD Crown Victoria S
The rear's, Yes. But then too, so are those of the Crown Victoria and Grand Marquis.88LTDCV351 - Aren't the marauder's wheel wells rolled or something like that?
The Marauder, Crown Victoria, and Grand Marquis all have the same part number(s) for the front fender(s).Heard it here on this site many years back. Means it would be different than GM, right?
EDIT: Related -POST-
.
Last edited by gdmjoe; 09-02-2020 at 07:04 PM.
WLB
BB#1) 1996 ImpalaSS - 16,500 miles - 100% stock
______________________________ ___________
BB#2) 2003 Marauder (300a) - 34k miles - Daily Driver
#2912 of 7093
Conceived 8/6/2002
Delivered 9/19/2002
Adopted 8/10/2011
Trilogy 242 - Self Installed 9/9/12 (0-60 5.5 sec)
Pioneer 6x8 Front
Legacy 600w 6x9 Rears
JL 6.5 SubWoofer
K&N CAI
Window tint 50% rear/35% front
FBM CHMSL with Strobe mod 7/1/12
DR Deep Aluminum Trans Pan
Sparta FOMOCO Racing 8.8 Girdle
Mo's Dyno Tune
Gorilla Nuts - The System
Ford Racing 4.10s, 31 spline Cobra carrier & axles 7/1/12
Powder Coat Axle Housing 7/1/12
CME HP Rear Control Arms & Watts Link 7/1/12
______________________________ ________________
Rex "SC Cheesehead" Weinbender 11-14-13
Ed "Baaad GN" Linthicum 8-6-2014
I was hoping to find a black front fender in good shape that I could replace myself.
Car-part.com
2004 SB Ported Trilogy 48
Has supporting mods and stuff
Thanks to Marty O for his help in updating this car.
R.I.P.
Rex "SC Cheesehead"
98-02 front fenders have a lip 03+ do not
2004 SB Ported Trilogy 48
Has supporting mods and stuff
Thanks to Marty O for his help in updating this car.
R.I.P.
Rex "SC Cheesehead"
The 2003+ do have a lip. Definitely would not consider them rolled (as in, the inside is flush-to the outside of the fender).RubberCtyRauder - 98-02 front fenders have a lip 03+ do not
EDIT: Example of rolled fender ...
.
Last edited by gdmjoe; 09-03-2020 at 02:29 PM. Reason: Example added.
I am no expert, i thought the cv front fenders do not have a hole for a screw of the turn signal.... Many moons ago i read something to the effect that the MGM fender is slightly different.
Front.
The twins2.3 whipple/aluminatorVortech V-2 lots of goodies
Current marauders
04 DTR totaled JUST NOW starting to part out 7-21-2021 https://youtu.be/REUxjP1BVpg
04 Silver Birch Dark Charcoal Hardtop Whipple Supercharger
04 Silver Birch Dark Charcoal Hardtop V2 Supercharger
04 Silver Birch Dark Charcoal Converted
03 DBP Light Flint #122
03 DBP Dark Charcoal #232
03 Silver Birch 300b Light Flint Going to fix er up
03 Black 300a
04 Silver Birch Dark Charcoal moonroof in the works
04 Heaton Swapped DTR
Joe's Wrecked DTR rebuild thread
There are currently 1 users browsing this thread. (0 members and 1 guests)