Results 1 to 14 of 14

Thread: PCV grommet part number?

  1. #1
    Join Date
    Jun 2008
    Location
    44077-3545
    Age
    42
    Posts
    5,274

    PCV grommet part number?

    Anyone got one?
    ordered a new PCV from Tasca but don’t like the way my OE grommet looks.
    '03 Marauder | '91 Country Squire | '18 Flex Ecoboost | '92 Shadow VT1100
    former Panthers: '02 MGM, '04 MGM, '04 MGM v2.0, '04 MM, '07 P71 w/5-speed, '04 CVLX, '03 SAP P71, '10 P7B
    CLICK HERE and have your Marauder's COA info added to the database!!! | 2003 list ||| 2004 list
    Quote Originally Posted by offroadkarter View Post
    Reinhart's tuning skills were comparable to an ape slapping the keyboard in microsoft excel.

  2. #2
    Join Date
    Mar 2008
    Location
    Next door to my neighbor
    Age
    50
    Posts
    20,353
    If in need they do have a regular PCV grommet in the help section at advance that fits our valve perfectly snug that I’ve used on Eaton swaps.


    Sent from my iPhone using Tapatalk Pro
    SOLD 12/31/2021

    Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.

  3. #3
    Join Date
    Jun 2008
    Location
    44077-3545
    Age
    42
    Posts
    5,274
    Thanks - will check it out.
    '03 Marauder | '91 Country Squire | '18 Flex Ecoboost | '92 Shadow VT1100
    former Panthers: '02 MGM, '04 MGM, '04 MGM v2.0, '04 MM, '07 P71 w/5-speed, '04 CVLX, '03 SAP P71, '10 P7B
    CLICK HERE and have your Marauder's COA info added to the database!!! | 2003 list ||| 2004 list
    Quote Originally Posted by offroadkarter View Post
    Reinhart's tuning skills were comparable to an ape slapping the keyboard in microsoft excel.

  4. #4
    Join Date
    Jun 2008
    Location
    44077-3545
    Age
    42
    Posts
    5,274
    Okay, bumping this.
    Anyone know the part number for the grommet (or whatever it's called with the two smaller bolts) pictured here? I stole this pic from another thread. I swear I've been looking and I can't seem to figure this one out.

    '03 Marauder | '91 Country Squire | '18 Flex Ecoboost | '92 Shadow VT1100
    former Panthers: '02 MGM, '04 MGM, '04 MGM v2.0, '04 MM, '07 P71 w/5-speed, '04 CVLX, '03 SAP P71, '10 P7B
    CLICK HERE and have your Marauder's COA info added to the database!!! | 2003 list ||| 2004 list
    Quote Originally Posted by offroadkarter View Post
    Reinhart's tuning skills were comparable to an ape slapping the keyboard in microsoft excel.

  5. #5
    Join Date
    Aug 2011
    Location
    Wisconsin
    Posts
    4,338

    WLB
    BB#1) 1996 ImpalaSS - 16,500 miles - 100% stock
    ______________________________ ___________

    BB#2) 2003 Marauder (300a) - 34k miles - Daily Driver
    #2912 of 7093
    Conceived 8/6/2002
    Delivered 9/19/2002
    Adopted 8/10/2011
    Trilogy 242 - Self Installed 9/9/12 (0-60 5.5 sec)
    Pioneer 6x8 Front
    Legacy 600w 6x9 Rears
    JL 6.5 SubWoofer
    K&N CAI
    Window tint 50% rear/35% front
    FBM CHMSL with Strobe mod 7/1/12
    DR Deep Aluminum Trans Pan
    Sparta FOMOCO Racing 8.8 Girdle
    Mo's Dyno Tune
    Gorilla Nuts - The System
    Ford Racing 4.10s, 31 spline Cobra carrier & axles 7/1/12
    Powder Coat Axle Housing 7/1/12
    CME HP Rear Control Arms & Watts Link 7/1/12
    ______________________________ ________________

    Rex "SC Cheesehead" Weinbender 11-14-13
    Ed "Baaad GN" Linthicum 8-6-2014

  6. #6
    Join Date
    Jun 2008
    Location
    44077-3545
    Age
    42
    Posts
    5,274
    I’m looking for the part that has the two bolts.
    that isn’t it.
    '03 Marauder | '91 Country Squire | '18 Flex Ecoboost | '92 Shadow VT1100
    former Panthers: '02 MGM, '04 MGM, '04 MGM v2.0, '04 MM, '07 P71 w/5-speed, '04 CVLX, '03 SAP P71, '10 P7B
    CLICK HERE and have your Marauder's COA info added to the database!!! | 2003 list ||| 2004 list
    Quote Originally Posted by offroadkarter View Post
    Reinhart's tuning skills were comparable to an ape slapping the keyboard in microsoft excel.

  7. #7
    Join Date
    Aug 2011
    Location
    Wisconsin
    Posts
    4,338
    I believe when you remove the 2 bolts and pull the assembly out that you can swap in new rubber. I'm not positive, it was too long ago that I pulled mine. Check it and see (or are you missing the metal part too?).

    WLB
    BB#1) 1996 ImpalaSS - 16,500 miles - 100% stock
    ______________________________ ___________

    BB#2) 2003 Marauder (300a) - 34k miles - Daily Driver
    #2912 of 7093
    Conceived 8/6/2002
    Delivered 9/19/2002
    Adopted 8/10/2011
    Trilogy 242 - Self Installed 9/9/12 (0-60 5.5 sec)
    Pioneer 6x8 Front
    Legacy 600w 6x9 Rears
    JL 6.5 SubWoofer
    K&N CAI
    Window tint 50% rear/35% front
    FBM CHMSL with Strobe mod 7/1/12
    DR Deep Aluminum Trans Pan
    Sparta FOMOCO Racing 8.8 Girdle
    Mo's Dyno Tune
    Gorilla Nuts - The System
    Ford Racing 4.10s, 31 spline Cobra carrier & axles 7/1/12
    Powder Coat Axle Housing 7/1/12
    CME HP Rear Control Arms & Watts Link 7/1/12
    ______________________________ ________________

    Rex "SC Cheesehead" Weinbender 11-14-13
    Ed "Baaad GN" Linthicum 8-6-2014

  8. #8
    Join Date
    Mar 2013
    Location
    Statesville, NC
    Age
    62
    Posts
    7
    On a similar topic, I'm having a hard time finding the rubber boot that connects the upper intake to the PCV tube. I started getting codes PO171 & 174 and after several checks for vacuum leaks I found that this connection was split where it transitions down to the smaller diameter plastic tube. Wasn't visible until you push on it and she opens up a nice crack. Any help will be much appreciated.
    pcv tube end boot.jpg
    Guns have 2 enemies: Politicians & Rust.

  9. #9
    Join Date
    Nov 2006
    Location
    Union City, CA
    Age
    48
    Posts
    2,502
    That entire hose comes as one piece. I replaced mine. I think my tear was in the lower connector and not the top. I have the part number somewhere.

    Quote Originally Posted by BLACK SUNSHINE View Post
    On a similar topic, I'm having a hard time finding the rubber boot that connects the upper intake to the PCV tube. I started getting codes PO171 & 174 and after several checks for vacuum leaks I found that this connection was split where it transitions down to the smaller diameter plastic tube. Wasn't visible until you push on it and she opens up a nice crack. Any help will be much appreciated.
    pcv tube end boot.jpg
    2003 Mercury Marauder 300B (Daily Driver)
    1988 LTD Crown Victoria S

  10. #10
    Join Date
    Nov 2006
    Location
    Union City, CA
    Age
    48
    Posts
    2,502
    2003 Mercury Marauder 300B (Daily Driver)
    1988 LTD Crown Victoria S

  11. #11
    Join Date
    Jun 2008
    Location
    44077-3545
    Age
    42
    Posts
    5,274
    That isn't the part I need.
    '03 Marauder | '91 Country Squire | '18 Flex Ecoboost | '92 Shadow VT1100
    former Panthers: '02 MGM, '04 MGM, '04 MGM v2.0, '04 MM, '07 P71 w/5-speed, '04 CVLX, '03 SAP P71, '10 P7B
    CLICK HERE and have your Marauder's COA info added to the database!!! | 2003 list ||| 2004 list
    Quote Originally Posted by offroadkarter View Post
    Reinhart's tuning skills were comparable to an ape slapping the keyboard in microsoft excel.

  12. #12
    Join Date
    Nov 2006
    Location
    Union City, CA
    Age
    48
    Posts
    2,502
    Sorry, I was answering Black Sunshine's question.
    2003 Mercury Marauder 300B (Daily Driver)
    1988 LTD Crown Victoria S

  13. #13
    Join Date
    Oct 2014
    Location
    Cunningham, Kansas
    Age
    70
    Posts
    695
    Probably a little late...The Ford SnapOn EPC, (dealership electronic parts catalog), does not show a part number for the PCV valve retainer for the Marauder. It is not a grommet as the PCV valve on these engines is a quarter turn plastic unit held in place by the PCV valve retainer. The PCV valve turns a 1/4 tur to lock and unlock. Since the parts catalog does not list the retainer or it's retaining screws separately it is considered part of the cam cover. I did find the part number for the 2004 Mustang 4.6 DOHC engine PCV retainer was 2C5Z6A892AA and it might just work. It also uses a 1/4 turn PCV valve, but the PCV valve for the Mustang is different and may be of the heated style. Hope this helps.

    Bob
    Parts Manager
    Lanterman Motors
    Pratt, Kansas
    Last edited by Fastbob; 11-29-2020 at 08:11 AM.
    2004 SB #2150 of 3214 Moonroof, Heated Seats and 6 CD Changer. Non OEM Mufflers and 32,XXX miles and counting.

  14. #14
    Join Date
    Jun 2008
    Location
    44077-3545
    Age
    42
    Posts
    5,274
    Quote Originally Posted by Fastbob View Post
    Hope this helps.
    All of that information was helpful, and not late at all since the car is wrapped up until spring anyway.
    Thank you.
    '03 Marauder | '91 Country Squire | '18 Flex Ecoboost | '92 Shadow VT1100
    former Panthers: '02 MGM, '04 MGM, '04 MGM v2.0, '04 MM, '07 P71 w/5-speed, '04 CVLX, '03 SAP P71, '10 P7B
    CLICK HERE and have your Marauder's COA info added to the database!!! | 2003 list ||| 2004 list
    Quote Originally Posted by offroadkarter View Post
    Reinhart's tuning skills were comparable to an ape slapping the keyboard in microsoft excel.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. OEM Part number
    By chucky in forum Steering, Suspension & Brakes
    Replies: 5
    Last Post: 03-04-2010, 01:54 PM
  2. OEM part number
    By burt ragio in forum Community Discussion
    Replies: 3
    Last Post: 07-07-2008, 07:08 AM
  3. Replies: 4
    Last Post: 06-09-2008, 05:58 AM
  4. Part Number ?
    By FordNut in forum Community Discussion
    Replies: 2
    Last Post: 01-03-2005, 04:08 PM
  5. Help with a part number
    By CRUZTAKER in forum Community Discussion
    Replies: 20
    Last Post: 06-08-2003, 05:58 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •