I made my full 3" SS exhaust so I know how ya feel.
It's hard work!
I made my full 3" SS exhaust so I know how ya feel.
It's hard work!
A little more progress. Got rained out on Sunday and I won't use the saws in the garage. Too much mess.20201109_181224.jpg20201109_181504.jpg20201109_181601.jpg
If you’re in control, you’re not going fast enough. – Parnelli Jones
If your wife's having a good time and you're not, you're still having a better time than if you're having a good time and she's not. - Red Green
2004 Marauder 300A - Garage Queen
1025 of 3213. It is one of 1237 in black and one of 2000 w/o the moonroof option.
Performance
4:10's, rear Adco, front Eibachs w/ KYB shocks, Working oil pressure gauge, JLT CA Kit, Fumoto Oil Drain Valve, TCE SS Brake Lines, Zack big brake kit.
Dress
Power by Ford coil covers, Maruder sill plates, God's head steering wheel emblem, spoiler, front and rear splash gaurds, Custom dead pedal, LED lights for engine bay, interior and gauges. 64' Marauder Sail Panel for rear badge, custom God's head badge in grill.
LOC: Clermont Florida
Well this is going to be fun to weld out.
20201114_172003.jpg
If you’re in control, you’re not going fast enough. – Parnelli Jones
If your wife's having a good time and you're not, you're still having a better time than if you're having a good time and she's not. - Red Green
2004 Marauder 300A - Garage Queen
1025 of 3213. It is one of 1237 in black and one of 2000 w/o the moonroof option.
Performance
4:10's, rear Adco, front Eibachs w/ KYB shocks, Working oil pressure gauge, JLT CA Kit, Fumoto Oil Drain Valve, TCE SS Brake Lines, Zack big brake kit.
Dress
Power by Ford coil covers, Maruder sill plates, God's head steering wheel emblem, spoiler, front and rear splash gaurds, Custom dead pedal, LED lights for engine bay, interior and gauges. 64' Marauder Sail Panel for rear badge, custom God's head badge in grill.
LOC: Clermont Florida
I used a pair of J bends to fabricate that section. 2 pieces (1 inverted) gave me a perfect fit
The band clamps do not have the holding force to keep the pipes from twisting. I think I need to add another hanger to support the weight more evenly. Has anyone used this bracket on the floor to mount hangers? My plan would be to span the two holes with a piece of bar stock to distribute the weight evenly and mount the hangers from the bar stock.
exhaust hanger locations.jpg
If you’re in control, you’re not going fast enough. – Parnelli Jones
If your wife's having a good time and you're not, you're still having a better time than if you're having a good time and she's not. - Red Green
2004 Marauder 300A - Garage Queen
1025 of 3213. It is one of 1237 in black and one of 2000 w/o the moonroof option.
Performance
4:10's, rear Adco, front Eibachs w/ KYB shocks, Working oil pressure gauge, JLT CA Kit, Fumoto Oil Drain Valve, TCE SS Brake Lines, Zack big brake kit.
Dress
Power by Ford coil covers, Maruder sill plates, God's head steering wheel emblem, spoiler, front and rear splash gaurds, Custom dead pedal, LED lights for engine bay, interior and gauges. 64' Marauder Sail Panel for rear badge, custom God's head badge in grill.
LOC: Clermont Florida
I had a similar problem when doing my brothers exhaust ('04 CVPI). Even when really really tight the band clamps can still rotate. I used a universal type hanger with a regular exhaust clamp suspended from the crossmember just in front of the watts link. Just cleaned off 2 spots and welded 2 3/8 x 1" bolts to the crossmember. Another option is a self tapper or sheet metal screw through the clamp and slip joint to prevent rotation.
2003 300a Trilogy #? 4.10s
2000 Excursion limited v10
1997 F350 7.3 5spd 4x4 (service truck)
1992 Taurus SHO vortec SC 5spd
1971 GMC 2500 pickup
1971 GMC 2500 suburban 4x4
1967 Camaro (basket case)
Pic of new bracket. I had the visible nuts down against the screw head then threaded the screws into the nuts behind the bracket. Then I tightened the nuts essentially lifting the bracket and pulling up on the mufflers.20201206_144728.jpg
If you’re in control, you’re not going fast enough. – Parnelli Jones
If your wife's having a good time and you're not, you're still having a better time than if you're having a good time and she's not. - Red Green
2004 Marauder 300A - Garage Queen
1025 of 3213. It is one of 1237 in black and one of 2000 w/o the moonroof option.
Performance
4:10's, rear Adco, front Eibachs w/ KYB shocks, Working oil pressure gauge, JLT CA Kit, Fumoto Oil Drain Valve, TCE SS Brake Lines, Zack big brake kit.
Dress
Power by Ford coil covers, Maruder sill plates, God's head steering wheel emblem, spoiler, front and rear splash gaurds, Custom dead pedal, LED lights for engine bay, interior and gauges. 64' Marauder Sail Panel for rear badge, custom God's head badge in grill.
LOC: Clermont Florida
Looks great. And I’m super glad your nuts are in the down position. (Much better that way )
Sent from my iPhone using Tapatalk Pro
SOLD 12/31/2021
Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.
High and tight.... high and tight
The twins2.3 whipple/aluminatorVortech V-2 lots of goodies
Current marauders
04 DTR totaled JUST NOW starting to part out 7-21-2021 https://youtu.be/REUxjP1BVpg
04 Silver Birch Dark Charcoal Hardtop Whipple Supercharger
04 Silver Birch Dark Charcoal Hardtop V2 Supercharger
04 Silver Birch Dark Charcoal Converted
03 DBP Light Flint #122
03 DBP Dark Charcoal #232
03 Silver Birch 300b Light Flint Going to fix er up
03 Black 300a
04 Silver Birch Dark Charcoal moonroof in the works
04 Heaton Swapped DTR
Joe's Wrecked DTR rebuild thread
There are currently 1 users browsing this thread. (0 members and 1 guests)