Someone attempted/half ass succeeded in painting the front grille emblem on my car I would like to just put in a stock one. If someone has a badge I would be interested. Maybe if someone has a damaged grille with a nice badge. Thanks.
Member
Someone attempted/half ass succeeded in painting the front grille emblem on my car I would like to just put in a stock one. If someone has a badge I would be interested. Maybe if someone has a damaged grille with a nice badge. Thanks.
GAME OVER, YOU LOSE!
Have you checked with Ford?
Senior Member
I believe I have a few extra front emblems. They are in used condition. I'll try to get some pictures of them for Ya.
Sent from my iPhone using Tapatalk Pro
Member
Also check with Zack. He had many of the front emblems. I got one at Marauderville in Las Vegas as a raffle prize.
Sent from my iPhone using Tapatalk
Member
Sorry I'm not sure I know who Zack isOriginally Posted by BLACKMARAUDER04
Member
That would be great thanks. I'm going to check with Ford, I've been told by a few people they are still available. I attempted to get the trunk badge through them with no luck so just figured they would not have the grille emblem either.
Senior Member
You can find them on eBay and Amazon (new and used) as well. A couple of examples:
Front Grille Emblem:
https://www.ebay.com/itm/Mercury-Sab...temCondition=3
Rear Trunk Emblem:
https://www.ebay.com/itm/03-11-Mercu...YAAOSwfTlcufqw
Member
I got the rear emblem off a Marauder that was at the local Pick-n-Pull when I went by last weekend. It was a sad site I will post pictures later of the car. Some of you may have seen it.
Sick-Speed play toy
If you can wait till April I know I have a few you can have. Currently they are all above this winter mess..
And you can now add a piano to that small spot of concrete that’s left.
Sent from my iPhone using Tapatalk Pro
SOLD 12/31/2021
Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.
Member
Appreciate it. I swooped the NOS one from EBay. Car is going to be minty after paint it deserves a nice shiny new badge
Senior Member
Nice! I love NOS! It feels so good to put NEW parts on a freshly painted car! The forum helps again...
2003 300A
Widened Rear Wheels with 295 45 Nitto G2's
Eaton Swapped by Curless
Brake Upgrade
Mo's Tune
JLT Intake
Addco Sway Bars
ADTR Coil Over Suspension
Metco Control Arms & Watts Link
SW Headers and Exhaust
Accessories By FastBlackMerc
4.10 Gears
Aeroforce Gauges
Pantherlights Headlamps
Senior Member
I have these 3 used ones.
Sent from my iPhone using Tapatalk Pro
Member
I sent you a PM about one of those. Thanks
Member
Found an NOS one on eBay thanks everyone who responded, I was going to put off painting my car for a bit but it’s going to happen sooner than later. I was thinking of putting on a used one for the time being before paint but the time is now.
Sent from my iPhone using Tapatalk
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
