Results 1 to 11 of 11

Thread: Keyless entry module.

  1. #1
    Join Date
    Feb 2005
    Location
    Crestview/Florida
    Age
    48
    Posts
    39

    Keyless entry module.

    Hey all, it's been a while but I still have my 2003 MM.
    I am finally home long enough to attempt to repair the keyless entry module. This thing has plagued me for years. Is anyone able to replace the relays or have a source for them? I have I apart and would really like to have it working again. I did a search but can't find anything relating. I sent one out to a fellow on the site years ago but don't know if he is still around. I have the relays out at the moment. I bought a used one but it quit unlocking the doors a short time later. I already replaced the actuator twice.

    Ideas? Thanks for reading.
    03 Marauder (Already goes to fast)

    91 Cougar XR7 SC (Some go fast stuff)
    90 Thinderbird Supercoupe (New motor, no go fast stuff)
    46 Willys CJ2A Jeep (will never go fast no matter what I do)

  2. #2
    Join Date
    Jan 2004
    Location
    Somewhere in the N.C. Triangle
    Age
    65
    Posts
    26,055
    Picture of the relays?
    “When you can’t make them see the light, make them feel the heat.”
    Ronald Regan

    "The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
    is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."

    Lt. Colonel Ralph Peters

    “Be polite, be professional, but have a plan to kill everybody you meet.”
    "I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
    General James Mattis




  3. #3
    Join Date
    Feb 2005
    Location
    Crestview/Florida
    Age
    48
    Posts
    39
    Here is a picture of the relay(s).20210206_084046.jpg
    03 Marauder (Already goes to fast)

    91 Cougar XR7 SC (Some go fast stuff)
    90 Thinderbird Supercoupe (New motor, no go fast stuff)
    46 Willys CJ2A Jeep (will never go fast no matter what I do)

  4. #4
    Join Date
    Jan 2004
    Location
    Somewhere in the N.C. Triangle
    Age
    65
    Posts
    26,055
    I'll see what I can find.

    Are you sure it's the relays?
    “When you can’t make them see the light, make them feel the heat.”
    Ronald Regan

    "The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
    is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."

    Lt. Colonel Ralph Peters

    “Be polite, be professional, but have a plan to kill everybody you meet.”
    "I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
    General James Mattis




  5. #5
    Join Date
    Feb 2005
    Location
    Crestview/Florida
    Age
    48
    Posts
    39
    Yeah, unfortunately pretty sure. The door wires are all good and changed the actuator twice.
    Thanks for looking for me!
    03 Marauder (Already goes to fast)

    91 Cougar XR7 SC (Some go fast stuff)
    90 Thinderbird Supercoupe (New motor, no go fast stuff)
    46 Willys CJ2A Jeep (will never go fast no matter what I do)

  6. #6
    Join Date
    Jan 2004
    Location
    Somewhere in the N.C. Triangle
    Age
    65
    Posts
    26,055
    How many relays are there?
    “When you can’t make them see the light, make them feel the heat.”
    Ronald Regan

    "The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
    is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."

    Lt. Colonel Ralph Peters

    “Be polite, be professional, but have a plan to kill everybody you meet.”
    "I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
    General James Mattis




  7. #7
    Join Date
    Feb 2005
    Location
    Crestview/Florida
    Age
    48
    Posts
    39
    There are 2 of them. I believe one works the driver's lock actuator and the other one works them all.
    03 Marauder (Already goes to fast)

    91 Cougar XR7 SC (Some go fast stuff)
    90 Thinderbird Supercoupe (New motor, no go fast stuff)
    46 Willys CJ2A Jeep (will never go fast no matter what I do)

  8. #8
    Join Date
    Jan 2004
    Location
    Somewhere in the N.C. Triangle
    Age
    65
    Posts
    26,055
    Search for Potter and Brumfield Tyco V2R-1020.

    I found theses:

    https://www.asap-logisticsolutions.c...tyco/v2r-1020/

    http://www.sourceresearch.com/Store1...2735&do=detail

    If you need someone to install the new relays, let me know.

    Good Luck!
    “When you can’t make them see the light, make them feel the heat.”
    Ronald Regan

    "The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
    is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."

    Lt. Colonel Ralph Peters

    “Be polite, be professional, but have a plan to kill everybody you meet.”
    "I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
    General James Mattis




  9. #9
    Join Date
    Feb 2005
    Location
    Crestview/Florida
    Age
    48
    Posts
    39
    Thank you for your time and effort. I will look into the links.
    03 Marauder (Already goes to fast)

    91 Cougar XR7 SC (Some go fast stuff)
    90 Thinderbird Supercoupe (New motor, no go fast stuff)
    46 Willys CJ2A Jeep (will never go fast no matter what I do)

  10. #10
    Join Date
    Nov 2014
    Location
    KC
    Age
    45
    Posts
    3,394
    Make sure, when swapping out the DDM, that you replace it with the exact part number..
    they are on eBay, I’ve sold 100s of them.
    typically they are less than 40 bucks
    The twins2.3 whipple/aluminatorVortech V-2 lots of goodies

    04 DTR totaled, might make into a station wagon Here is how bad it was https://youtu.be/REUxjP1BVpg

    04 Silver Birch Dark Charcoal Hardtop Whipple
    04 Silver Birch Dark Charcoal Hardtop V2
    04 Silver Birch Light Flint To Dark Charcoal Converted
    03 DD Blue / Light Flint
    03 Blue / Dark Charcoal #232
    03 Silver Birch Light Flint <--- Cannot kill it.
    03 Black 300a

    04 Heaton Swapped DTR
    Joe's Wrecked DTR rebuild thread

  11. #11
    Join Date
    Sep 2005
    Location
    APPLE VALLEY,CA
    Age
    56
    Posts
    1,207
    I've found the problem to be that you must hit the numbers extra hard. My black has this problem.
    At night so you can see the interior light turn on, hit the numbers with something hard or your key.
    If the light goes on, it works. I've never tried replacing the keypad, so I can't tell you if that fixes the problem.

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

Similar Threads

  1. For Sale 2003-2004 OEM DriverDoor-Keyless-Entry-Module-3W7T-13C791-AA
    By CrownVictorious in forum Marauder-specific Parts for Sale
    Replies: 4
    Last Post: 02-23-2018, 10:28 PM
  2. Wanted To Buy Keyless Entry Module
    By Jtrip in forum Marauder Parts/Misc. Wanted
    Replies: 4
    Last Post: 01-26-2018, 06:43 PM
  3. For Sale Keyless Entry Actuator Pad and Module
    By Jeronimojc in forum Marauder-specific Parts for Sale
    Replies: 15
    Last Post: 07-15-2014, 02:57 PM
  4. Keyless Entry
    By Timw286 in forum Community Discussion
    Replies: 12
    Last Post: 03-17-2012, 07:53 AM
  5. Keyless Entry...
    By VNMUS in forum The Lounge
    Replies: 16
    Last Post: 09-24-2006, 05:54 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •