What wheels are on that black one? That’s one of the best looking and best stance I’ve ever seen!
Sent from my iPhone using Tapatalk Pro
What wheels are on that black one? That’s one of the best looking and best stance I’ve ever seen!
Sent from my iPhone using Tapatalk Pro
SOLD 12/31/2021
Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.
Thanks [mention]justbob [/mention] that one is mine. The wheels are from a company called GMR. 20x8 front and 20x10 rear and I kept the tire ratios pretty close to stock (taller in the rear). I’m lowered on Ridetech coil overs in the front from ADTR.net and I basically set the air ride in the rear as low as it will go. Lol.
Not sure if you can see in the pic, but I was able to re-use my Marauder center caps, which was real important to me to keep the right look.
Sent from my iPhone using Tapatalk
Oh I caught it
I’ve never cared for the Marauder rims or fat man seats for that matter but almost all aftermarket wheels make them look like a worked over Vic in my opinion. Yours says Mercury is back Dodge boys, bring it.
Any special backspacing/offset?
Sent from my iPhone using Tapatalk Pro
SOLD 12/31/2021
Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.
...........
03 Black MM: Trilogy #19, Build Date 04/02/03 #7113
03 SB MM: Lidio Tune/JLT CAI DD Build Date 04/02/03 #7114
03 Black MM: Trilogy #19, Build Date 04/02/03 #7113
03 SB MM: Lidio Tune/JLT CAI DD Build Date 04/02/03 #7114
Yea, definitely lowered. No cutting though. I have adjustable Ride tech coil overs in from ADTR.net in the front. They are adjusted down about 2 3/8”. For the rear, I moved the air position sensor over as far as it will go. That lowered the back about 2 1/4”. The wheel and tire combo is close to stock height and I tried to maintain the factory look with the rear tire being taller then the front. I also upgraded the upper and lower control arms, watts link and sway bars.
Other things, Detroit Truetrac, 4.10 gears, SW long tubes, cat delete, Borla mufflers and Marty tuned.
Awesome showing at Carlisle, looks like a good time
Definitely agree with what others have said about John84's car- love those aftermarket wheels which is usually hard to pull off with Marauders, good call sticking with the oem centercaps.
Cheers,
'04 Marauder
There are currently 1 users browsing this thread. (0 members and 1 guests)